Boelens
|
|
May 08, 2013, 10:27:19 AM |
|
How much is 14488 hashes per sec?
Pretty terrible. Aw really? I got a pretty good CPU. How much YAcoin will I get per hour? Not quite sure, you'll just have like less luck in getting a block. But thats quite a lot lower than everyone else. Well, now I feel sad. All my PC's and laptops got Nvidia cards so GPU mining wasn't really an option, now there's a CPU one and I was all like "I have a chance I have a chance!" I'll just go sit in the corner over there. Its probably not your real hash rate, if you spam the command if fluctuates heaps. Alright, that make sme feel better. I'll just leave it on for about three hours and we'll see what happens.
|
|
|
|
de_xt
|
|
May 08, 2013, 10:27:28 AM |
|
why are we mining this
Cos PoW + PoS + Scrypt + CPU-only early mining is kinda cool, compared with other plain coins out there. I think this is one of the most fair currencies in terms of mining since most people out there only have regular CPUs, no matter how many GPUs they have attached to their pretty expensive rigs. PS I just got 2 valid out of 14... last one 1 hr ago.
|
|
|
|
Lowlander
|
|
May 08, 2013, 10:28:25 AM |
|
so, party is over, imho
|
|
|
|
Harry_Styles
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 08, 2013, 10:29:45 AM |
|
still just getting orphans
|
|
|
|
blastbob
|
|
May 08, 2013, 10:30:13 AM |
|
Is it verified that cpuminer scrypt works?
|
Bitrated user: blastbob.
|
|
|
Caesar V
|
|
May 08, 2013, 10:30:26 AM |
|
so, party is over, imho
yep, not getting jack shit anymore.
|
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
|
May 08, 2013, 10:30:46 AM |
|
Ok, let's say yacoind works on server X.
And server Y has good mining speed but can't run yacoind.
Is there a way to make server Y mine for the yacoind client in server X?
If so, how?
I have it like this. Server A has client on it then point B to Server A and connect on that ip and port. So if Server a is for example 192.168.0.3 with client on it you would simply just put that in from server b or c or d to all connect to A if you are doing it over ISP ip address then you need to allow all ips in conf file and then point miners at it
|
|
|
|
alxs
|
|
May 08, 2013, 10:31:29 AM |
|
I get a little window popping up..."Recieving xxx" but no transaction...lol
Guess false orphan notice...
|
|
|
|
0150r
Newbie
Offline
Activity: 58
Merit: 0
|
|
May 08, 2013, 10:31:52 AM |
|
I think this is one of the most fair currencies in terms of mining since most people have regular CPUs out there, no matter how many GPUs they have attached to their pretty expensive rigs. Do these GPU farms run 100 GPUs off a single CPU or do they run them off 20-30 CPUs? They still win. What's bad about it though? Bigger risk for a bigger reward..
|
|
|
|
xthestig
Newbie
Offline
Activity: 42
Merit: 0
|
|
May 08, 2013, 10:32:40 AM |
|
Is it verified that cpuminer scrypt works?
From the instructions given mine is working nothing accepted yet, but it is hashing away
|
|
|
|
blastbob
|
|
May 08, 2013, 10:33:43 AM |
|
Is it verified that cpuminer scrypt works?
From the instructions given mine is working nothing accepted yet, but it is hashing away I am testing it now.. would be nice
|
Bitrated user: blastbob.
|
|
|
Rjb82
Newbie
Offline
Activity: 57
Merit: 0
|
|
May 08, 2013, 10:36:24 AM |
|
Is it verified that cpuminer scrypt works?
From the instructions given mine is working nothing accepted yet, but it is hashing away 6 rejected according to mine. but not adding to the orphans in the client.
|
|
|
|
BBQCoinsFTW
Newbie
Offline
Activity: 42
Merit: 0
|
|
May 08, 2013, 10:36:56 AM |
|
Ok, let's say yacoind works on server X.
And server Y has good mining speed but can't run yacoind.
Is there a way to make server Y mine for the yacoind client in server X?
If so, how?
I have it like this. Server A has client on it then point B to Server A and connect on that ip and port. So if Server a is for example 192.168.0.3 with client on it you would simply just put that in from server b or c or d to all connect to A if you are doing it over ISP ip address then you need to allow all ips in conf file and then point miners at it ok [2013-05-06 18:58:12] HTTP request failed: The requested URL returned error: 403 [2013-05-06 18:58:12] json_rpc_call failed, retry after 30 seconds Maybe this is because all blocks haven't downloaded in yacoind?
|
|
|
|
bitdwarf
Sr. Member
Offline
Activity: 406
Merit: 250
The cryptocoin watcher
|
|
May 08, 2013, 10:37:09 AM |
|
Cos PoW + PoS + Scrypt + CPU-only early mining is kinda cool, compared with other plain coins out there.
I think this is one of the most fair currencies in terms of mining since most people have regular CPUs out there, no matter how many GPUs they have attached to their pretty expensive rigs. My GPU has found a wooping total of 2 blocks (mining in pools) in other cryptos ever since I started. And they were both Scrypt alts. YAC blocks are coming in a bit slower (one every 10 minutes here, stock i5 2500k), but it's still amazing to see whole chunks of 80 coins come in, instead of 0.0019239234 Whatever Coin InAPool. Do these GPU farms run 100 GPUs off a single CPU or do they run them off 20-30 CPUs? They still win. What's bad about it though? Bigger risk for a bigger reward..
Those are low power CPUs.
|
𝖄𝖆𝖈: YF3feU4PNLHrjwa1zV63BcCdWVk5z6DAh5 · 𝕭𝖙𝖈: 12F78M4oaNmyGE5C25ZixarG2Nk6UBEqme Ɏ: "the altcoin for the everyman, where the sweat on one's brow can be used to cool one's overheating CPU" -- theprofileth
|
|
|
blastbob
|
|
May 08, 2013, 10:38:29 AM |
|
Ok, let's say yacoind works on server X.
And server Y has good mining speed but can't run yacoind.
Is there a way to make server Y mine for the yacoind client in server X?
If so, how?
I have it like this. Server A has client on it then point B to Server A and connect on that ip and port. So if Server a is for example 192.168.0.3 with client on it you would simply just put that in from server b or c or d to all connect to A if you are doing it over ISP ip address then you need to allow all ips in conf file and then point miners at it ok [2013-05-06 18:58:12] HTTP request failed: The requested URL returned error: 403 [2013-05-06 18:58:12] json_rpc_call failed, retry after 30 seconds Maybe this is because all blocks haven't downloaded in yacoind? You need to have the rpcallowip=10.0.0.* etc
|
Bitrated user: blastbob.
|
|
|
xthestig
Newbie
Offline
Activity: 42
Merit: 0
|
|
May 08, 2013, 10:39:07 AM |
|
Is it verified that cpuminer scrypt works?
From the instructions given mine is working nothing accepted yet, but it is hashing away I am testing it now.. would be nice 5 blocks running cpuminer all orphans though
|
|
|
|
BBQCoinsFTW
Newbie
Offline
Activity: 42
Merit: 0
|
|
May 08, 2013, 10:40:35 AM |
|
Ok, let's say yacoind works on server X.
And server Y has good mining speed but can't run yacoind.
Is there a way to make server Y mine for the yacoind client in server X?
If so, how?
I have it like this. Server A has client on it then point B to Server A and connect on that ip and port. So if Server a is for example 192.168.0.3 with client on it you would simply just put that in from server b or c or d to all connect to A if you are doing it over ISP ip address then you need to allow all ips in conf file and then point miners at it ok [2013-05-06 18:58:12] HTTP request failed: The requested URL returned error: 403 [2013-05-06 18:58:12] json_rpc_call failed, retry after 30 seconds Maybe this is because all blocks haven't downloaded in yacoind? You need to have the rpcallowip=10.0.0.* etc Did that, in my yacoind server i modified the yacoin.conf to allow the ip of my CPU farm.
|
|
|
|
ig0tik3d
Legendary
Offline
Activity: 1246
Merit: 1000
|
|
May 08, 2013, 10:42:45 AM |
|
Can't download Win binary from MEGA since it complains about incompatible browser, WTF? Anyone has some other link?
http://rghost.ru/45845082
|
|
|
|
Caesar V
|
|
May 08, 2013, 10:42:52 AM |
|
Cos PoW + PoS + Scrypt + CPU-only early mining is kinda cool, compared with other plain coins out there.
I think this is one of the most fair currencies in terms of mining since most people have regular CPUs out there, no matter how many GPUs they have attached to their pretty expensive rigs. My GPU has found a wooping total of 2 blocks (mining in pools) in other cryptos ever since I started. And they were both Scrypt alts. YAC blocks are coming in a bit slower (one every 10 minutes here, stock i5 2500k), but it's still amazing to see whole chunks of 80 coins come in, instead of 0.0019239234 Whatever Coin InAPool. Do these GPU farms run 100 GPUs off a single CPU or do they run them off 20-30 CPUs? They still win. What's bad about it though? Bigger risk for a bigger reward..
Those are low power CPUs. I have an overclocked i5 and I don't get anything at all for like 40 minutes, did you add something extra?
|
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
|
May 08, 2013, 10:43:37 AM |
|
Ok, let's say yacoind works on server X.
And server Y has good mining speed but can't run yacoind.
Is there a way to make server Y mine for the yacoind client in server X?
If so, how?
I have it like this. Server A has client on it then point B to Server A and connect on that ip and port. So if Server a is for example 192.168.0.3 with client on it you would simply just put that in from server b or c or d to all connect to A if you are doing it over ISP ip address then you need to allow all ips in conf file and then point miners at it ok [2013-05-06 18:58:12] HTTP request failed: The requested URL returned error: 403 [2013-05-06 18:58:12] json_rpc_call failed, retry after 30 seconds Maybe this is because all blocks haven't downloaded in yacoind? You need to have the rpcallowip=10.0.0.* etc Did that, in my yacoind server i modified the yacoin.conf to allow the ip of my CPU farm. you got all ports forwarded on router too ?
|
|
|
|
|