siagirl
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 02:09:57 PM |
|
Sigt-miner.zip does not work with rx390 GPUs. Please help.
|
|
|
|
|
ruptan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 02:26:50 PM |
|
please help sgminer cant run at rx 560
Step 1: verify your device is present for miner sgminer -n pauseStep 2: run the miner, set -g number to your device number(s). If you have Intel HD graphics and it's enabled, try --gpu-platform 0 as well. setx GPU_USE_SYNC_OBJECTS 1 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 sgminer.exe -k skunkhash -o stratum+tcp://yiimp.ccminer.org:8433 -u qwerty -p c=SIGT -I 16 -w 128 -g 0 --gpu-platform 1
This works fine for RX460 4Gb which is technically almost the same as RX560. good and thanks. btw what hashrate on ur rx460/rx560? I am trying to mine with AMD Sapphire 270x. Everything works but no hash...what could be wrong? Any idea? Thanks sgminer.exe -k skunkhash -o stratum+tcp://skunk.mine.zpool.ca:8433 -u B7T4vpVCdKsaN5gfxHKUs -p c=SIGT -I 11
|
|
|
|
ItaCraft
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 138
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 03:32:57 PM |
|
When you make a transaction, the wallet creates another adress to send the rest of the coins to this adress, for security
|
|
|
|
BonTonPlease
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 03:54:33 PM |
|
What is the next milestone of this project?
|
|
|
|
hatch789
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:04:18 PM |
|
Hello Guys, Mining a tiny bit on Windows to test SIGT out and I like where it's going. I want to kick it into a higher gear and set this up on my linux systems. I'm having problems compiling the build. Is there a pre-compiled version for Linux? I tried cloning the version at https://github.com/tpruvot/ccminerThen I ran ./build.sh It gets to the end and error's out with this. My error is 3 lines from the bottom. HELP! I can't find anything valuable on this build error. What am I doing wrong. make[2]: Entering directory '/home/chris/CryptoMining/SIGT/ccminer' gcc -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML -g -O2 -MT ccminer-crc32.o -MD -MP -MF .deps/ccminer-crc32.Tpo -c -o ccminer-crc32.o `test -f 'crc32.c' || echo './'`crc32.c gcc -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML -g -O2 -MT ccminer-hefty1.o -MD -MP -MF .deps/ccminer-hefty1.Tpo -c -o ccminer-hefty1.o `test -f 'hefty1.c' || echo './'`hefty1.c g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-ccminer.o -MD -MP -MF .deps/ccminer-ccminer.Tpo -c -o ccminer-ccminer.o `test -f 'ccminer.cpp' || echo './'`ccminer.cpp g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-pools.o -MD -MP -MF .deps/ccminer-pools.Tpo -c -o ccminer-pools.o `test -f 'pools.cpp' || echo './'`pools.cpp mv -f .deps/ccminer-crc32.Tpo .deps/ccminer-crc32.Po g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-util.o -MD -MP -MF .deps/ccminer-util.Tpo -c -o ccminer-util.o `test -f 'util.cpp' || echo './'`util.cpp ccminer.cpp:49:26: fatal error: cuda_runtime.h: No such file or directory compilation terminated. Makefile:1712: recipe for target 'ccminer-ccminer.o' failed make[2]: *** [ccminer-ccminer.o] Error 1 make[2]: *** Waiting for unfinished jobs.... YOU NEED THE BUILD ENVIRONMENT-- There are web tutorials for this. Tpruvot's GitHub site explains the requirements, they need to be in place on your linux box. --scryptr Forgive me please, I'm new to build environments but eager to learn. I don't see the requirements (instructions) on Tpruvot's site. Can you point me to a link so I can learn how to do this. Google is turning up various results of different builds and I'm not sure which one would be right to do for this build.
|
|
|
|
Rashkae
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:18:34 PM |
|
Awesome, got a 5% boost on my 1080Ti. Thank you!!
|
Did I help you? If yes, hit me up with some Eth! 0xD6422bcFD87989cf04D7dB489B9c18b3cA95886e
|
|
|
BLNT
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:21:30 PM |
|
The initial spike I saw with this was reminiscent of what I saw with ChainCoin.
Can anyone tell me why so many on here believe (or want to believe) that this has a future?
I may look back and think that 1400... 1000... or even 500 was a GREAT place to "buy in", or perhaps not.
I wish I had bought into Sirius when they almost went under, and the stock was down to a NICKEL !!
|
|
|
|
signatum (OP)
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:23:24 PM |
|
What is the next milestone of this project?
Completion of the Signatum marketplace, which is already undergoing development.
|
|
|
|
palgin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:29:07 PM |
|
Palgin,
What is the estimated hash rate for 1060 6gb ?
Don't have these, only 3Gb versions, think it should be something like 19-20 MH. Hi palgin. FYI: I am using it, but only for testing (my rigs are AMD) on ntb with nvidia > Model: "nVidia GM107GLM [Quadro M1000M] - only 4.05 kH/s, intensity 20 ". If does function, but after about 5-10 minutes it crashes with memory acces violation. This could be suboptimally tempfixed by bash cycle
#!/usr/bin/env bash while true do export GPU_MAX_HEAP_SIZE=100 export GPU_USE_SYNC_OBJECTS=1 export GPU_SINGLE_ALLOC_PERCENT=100 export GPU_MAX_ALLOC_PERCENT=100 /home/d3f4ult/bin/ccminer-1.0-skunk/ccminer -a skunk -o stratum+tcp://sigt.pool.mn:8732 -u user.rig -p passw --cpu-priority=3 -i 20 sleep 1 done
Thanks for testing! WOW I've just realized, I am talking to the developer LOL So you mean that I have to replace ccminer (from ccminer-1.0-skunk.tar.gz) after I ran build.sh from tpruvot. right? No, it won't work, it's an already compiled binary inside and different base (tpruvot and alexis78) can't see a speedup with GTX 1060, its even 1 Mh/s less in total - some config adjustments needed? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Speedup is mainly on lot-of-cuda-cores cards, on 1060 it's barely visible. Anyway, I recommend you to update because number of wrong hashes and rejects is significantly lower because of kernel optimisations. And hashrate fluctuate according to current block difficulty, maybe you were unlucky running when diff was higher ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
BTC tips welcome: 16DHzyuqenEoHRA3w3YVGcYSDSHks7mor4
|
|
|
nicog5
Newbie
Offline
Activity: 64
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:42:48 PM |
|
@palgin Can you please also speed up the sgminer for AMD RX400/RX500? Thanks
|
|
|
|
Rashkae
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 04:49:30 PM |
|
@palgin If this coin spikes high and I actually make a gain, pass me your btc address ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
Did I help you? If yes, hit me up with some Eth! 0xD6422bcFD87989cf04D7dB489B9c18b3cA95886e
|
|
|
slatanic2012
Newbie
Offline
Activity: 24
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 05:21:30 PM |
|
Palgin,
What is the estimated hash rate for 1060 6gb ?
Don't have these, only 3Gb versions, think it should be something like 19-20 MH. Hi palgin. FYI: I am using it, but only for testing (my rigs are AMD) on ntb with nvidia > Model: "nVidia GM107GLM [Quadro M1000M] - only 4.05 kH/s, intensity 20 ". If does function, but after about 5-10 minutes it crashes with memory acces violation. This could be suboptimally tempfixed by bash cycle
#!/usr/bin/env bash while true do export GPU_MAX_HEAP_SIZE=100 export GPU_USE_SYNC_OBJECTS=1 export GPU_SINGLE_ALLOC_PERCENT=100 export GPU_MAX_ALLOC_PERCENT=100 /home/d3f4ult/bin/ccminer-1.0-skunk/ccminer -a skunk -o stratum+tcp://sigt.pool.mn:8732 -u user.rig -p passw --cpu-priority=3 -i 20 sleep 1 done
Thanks for testing! WOW I've just realized, I am talking to the developer LOL So you mean that I have to replace ccminer (from ccminer-1.0-skunk.tar.gz) after I ran build.sh from tpruvot. right? No, it won't work, it's an already compiled binary inside and different base (tpruvot and alexis78) can't see a speedup with GTX 1060, its even 1 Mh/s less in total - some config adjustments needed? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Speedup is mainly on lot-of-cuda-cores cards, on 1060 it's barely visible. Anyway, I recommend you to update because number of wrong hashes and rejects is significantly lower because of kernel optimisations. And hashrate fluctuate according to current block difficulty, maybe you were unlucky running when diff was higher ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) are you guys using the last from ccminer?
|
|
|
|
car1999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 05:37:32 PM |
|
@signatum If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help.
|
|
|
|
palgin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 05:46:04 PM |
|
@palgin Can you please also speed up the sgminer for AMD RX400/RX500? Thanks
I may take a look, but I haven't got any AMD for testing, I can't compete with Wolf0 @palgin If this coin spikes high and I actually make a gain, pass me your btc address ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Wow, didn't expect that. But if it'll spike, I'll remember you ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) @signatum If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help. It works like bitcoin-qt. Follow these steps: 1) Open console from your wallet, "Help"->"Debug window"->"Console" tab 2) push following command: walletpassphrase <passphrase> 600 3) push following command: importprivkey <signatumprivkey> Done
|
BTC tips welcome: 16DHzyuqenEoHRA3w3YVGcYSDSHks7mor4
|
|
|
blissz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 05:48:38 PM |
|
@signatum If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help. It works like bitcoin-qt. Follow these steps: 1) Open console from your wallet, "Help"->"Debug window"->"Console" tab 2) push following command: walletpassphrase <passphrase> 600 3) push following command: importprivkey <signatumprivkey> Done That's how to do that yes. You can skip step 2 if you haven't encrypted your wallet yet. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
car1999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 05:53:34 PM |
|
@signatum If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help. It works like bitcoin-qt. Follow these steps: 1) Open console from your wallet, "Help"->"Debug window"->"Console" tab 2) push following command: walletpassphrase <passphrase> 600 3) push following command: importprivkey <signatumprivkey> Done That's how to do that yes. You can skip step 2 if you haven't encrypted your wallet yet. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I believe there was a private key in the origin wallet, then I import another private key, maybe more other private keys, does these private keys work well together?
|
|
|
|
blissz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 05:56:58 PM |
|
I believe there was a private key in the origin wallet, then I import another private key, maybe more other private keys, does these private keys work well together?
yes you can import multiple private keys in one wallet.
|
|
|
|
sonerbo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 06:05:34 PM |
|
@palgin
ı try to mine with tree r9 380 but sgminer doesnt founds any accepted shares. Low diff share rejected
|
|
|
|
Sam123
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 06:10:46 PM |
|
Hello, Can somebody post please the command line to mine on Windows with Nvidea Card using suprnova pool Thanks
|
|
|
|
|