[ANN] Signatum - New Algorithm - Fair Launch - No Premine

[siagirl]

Sigt-miner.zip does not work with rx390 GPUs. Please help.

[smartins]

Hmmm just transferred 5 SIGT to Cryptopia using the official wallet but on the explorer two transfers were made to two different recipients! One is the Cryptopia SIGT address and the other is unknown to me! 5 SIGT to cryptopia, 5.43 to the unknown address!
http://explorer.signatum.io/tx/755cd6f5f6381ca62bafcf7ee99a567292ef961b1b67a7cae163c473e5d06b7f

Any ideas of what happened?

[ruptan]

please help sgminer cant run at rx 560

Step 1: verify your device is present for miner

sgminer -n
pause

Step 2: run the miner, set -g number to your device number(s). If you have Intel HD graphics and it's enabled, try --gpu-platform 0 as well.


setx GPU_USE_SYNC_OBJECTS 1
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o stratum+tcp://yiimp.ccminer.org:8433 -u qwerty -p c=SIGT -I 16 -w 128 -g 0 --gpu-platform 1


This works fine for RX460 4Gb which is technically almost the same as RX560.

good and thanks.

btw what hashrate on ur rx460/rx560?

I am trying to mine with AMD Sapphire 270x. Everything works but no hash...what could be wrong? Any idea? Thanks
sgminer.exe -k skunkhash -o stratum+tcp://skunk.mine.zpool.ca:8433 -u B7T4vpVCdKsaN5gfxHKUs -p c=SIGT -I 11

[ItaCraft]

Hmmm just transferred 5 SIGT to Cryptopia using the official wallet but on the explorer two transfers were made to two different recipients! One is the Cryptopia SIGT address and the other is unknown to me! 5 SIGT to cryptopia, 5.43 to the unknown address!
http://explorer.signatum.io/tx/755cd6f5f6381ca62bafcf7ee99a567292ef961b1b67a7cae163c473e5d06b7f

Any ideas of what happened?

When you make a transaction, the wallet creates another adress to send the rest of the coins to this adress, for security

[BonTonPlease]

What is the next milestone of this project?

[hatch789]

Hello Guys,

Mining a tiny bit on Windows to test SIGT out and I like where it's going. I want to kick it into a higher gear and set this up on my linux systems. I'm having problems compiling the build. Is there a pre-compiled version for Linux?

I tried cloning the version at https://github.com/tpruvot/ccminer
Then I ran ./build.sh

It gets to the end and error's out with this. My error is 3 lines from the bottom. HELP! I can't find anything valuable on this build error. What am I doing wrong.

make[2]: Entering directory '/home/chris/CryptoMining/SIGT/ccminer'
gcc -DHAVE_CONFIG_H -I.  -fopenmp  -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML    -g -O2 -MT ccminer-crc32.o -MD -MP -MF .deps/ccminer-crc32.Tpo -c -o ccminer-crc32.o `test -f 'crc32.c' || echo './'`crc32.c
gcc -DHAVE_CONFIG_H -I.  -fopenmp  -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML    -g -O2 -MT ccminer-hefty1.o -MD -MP -MF .deps/ccminer-hefty1.Tpo -c -o ccminer-hefty1.o `test -f 'hefty1.c' || echo './'`hefty1.c
g++ -DHAVE_CONFIG_H -I.  -fopenmp  -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML    -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-ccminer.o -MD -MP -MF .deps/ccminer-ccminer.Tpo -c -o ccminer-ccminer.o `test -f 'ccminer.cpp' || echo './'`ccminer.cpp
g++ -DHAVE_CONFIG_H -I.  -fopenmp  -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML    -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-pools.o -MD -MP -MF .deps/ccminer-pools.Tpo -c -o ccminer-pools.o `test -f 'pools.cpp' || echo './'`pools.cpp
mv -f .deps/ccminer-crc32.Tpo .deps/ccminer-crc32.Po
g++ -DHAVE_CONFIG_H -I.  -fopenmp  -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda/include -DUSE_WRAPNVML    -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-util.o -MD -MP -MF .deps/ccminer-util.Tpo -c -o ccminer-util.o `test -f 'util.cpp' || echo './'`util.cpp
ccminer.cpp:49:26: fatal error: cuda_runtime.h: No such file or directory
compilation terminated.
Makefile:1712: recipe for target 'ccminer-ccminer.o' failed
make[2]: *** [ccminer-ccminer.o] Error 1
make[2]: *** Waiting for unfinished jobs....

YOU NEED THE BUILD ENVIRONMENT--

There are web tutorials for this.  Tpruvot's GitHub site explains the requirements, they need to be in place on your linux box.       --scryptr

Forgive me please, I'm new to build environments but eager to learn. I don't see the requirements (instructions) on Tpruvot's site. Can you point me to a link so I can learn how to do this. Google is turning up various results of different builds and I'm not sure which one would be right to do for this build.

[Rashkae]

UPD: https://github.com/palginpav/ccminer/releases/download/v1.1/ccminer-1.1-skunk.zip , with reworked algos, speedup for 10xx cards, haven't tested on 9xx

Awesome, got a 5% boost on my 1080Ti.

Thank you!!

[BLNT]

The initial spike I saw with this was reminiscent of what I saw with ChainCoin.

Can anyone tell me why so many on here believe (or want to believe) that this has a future?

I may look back and think that 1400... 1000... or even 500 was a GREAT place to "buy in", or perhaps not.

I wish I had bought into Sirius when they almost went under, and the stock was down to a NICKEL !!

[signatum]

What is the next milestone of this project?

Completion of the Signatum marketplace, which is already undergoing development.

[palgin]

Palgin,

What is the estimated hash rate for 1060 6gb ?

Don't have these, only 3Gb versions, think it should be something like 19-20 MH.

Hi palgin. FYI: I am using it, but only for testing (my rigs are AMD) on ntb with nvidia > Model: "nVidia GM107GLM [Quadro M1000M] - only 4.05 kH/s, intensity 20 ".
If does function, but after about 5-10 minutes it crashes with memory acces violation. This could be suboptimally tempfixed by bash cycle

#!/usr/bin/env bash
while true
do
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_SINGLE_ALLOC_PERCENT=100
export GPU_MAX_ALLOC_PERCENT=100
/home/d3f4ult/bin/ccminer-1.0-skunk/ccminer -a skunk -o stratum+tcp://sigt.pool.mn:8732 -u user.rig -p passw --cpu-priority=3 -i 20
sleep 1
done

Thanks for testing!

WOW I've just realized, I am talking to the developer LOL
So you mean that I have to replace ccminer (from ccminer-1.0-skunk.tar.gz) after I ran build.sh from tpruvot. right?

No, it won't work, it's an already compiled binary inside and different base (tpruvot and alexis78)

can't see a speedup with GTX 1060, its even 1 Mh/s less in total - some config adjustments needed?

Speedup is mainly on lot-of-cuda-cores cards, on 1060 it's barely visible. Anyway, I recommend you to update because number of wrong hashes and rejects is significantly lower because of kernel optimisations. And hashrate fluctuate according to current block difficulty, maybe you were unlucky running when diff was higher  

[nicog5]

@palgin
Can you please also speed up the sgminer for AMD RX400/RX500?
Thanks

[Rashkae]

@palgin If this coin spikes high and I actually make a gain, pass me your btc address

[slatanic2012]

Palgin,

What is the estimated hash rate for 1060 6gb ?

Don't have these, only 3Gb versions, think it should be something like 19-20 MH.

Hi palgin. FYI: I am using it, but only for testing (my rigs are AMD) on ntb with nvidia > Model: "nVidia GM107GLM [Quadro M1000M] - only 4.05 kH/s, intensity 20 ".
If does function, but after about 5-10 minutes it crashes with memory acces violation. This could be suboptimally tempfixed by bash cycle

#!/usr/bin/env bash
while true
do
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_SINGLE_ALLOC_PERCENT=100
export GPU_MAX_ALLOC_PERCENT=100
/home/d3f4ult/bin/ccminer-1.0-skunk/ccminer -a skunk -o stratum+tcp://sigt.pool.mn:8732 -u user.rig -p passw --cpu-priority=3 -i 20
sleep 1
done

Thanks for testing!

WOW I've just realized, I am talking to the developer LOL
So you mean that I have to replace ccminer (from ccminer-1.0-skunk.tar.gz) after I ran build.sh from tpruvot. right?

No, it won't work, it's an already compiled binary inside and different base (tpruvot and alexis78)

can't see a speedup with GTX 1060, its even 1 Mh/s less in total - some config adjustments needed?

Speedup is mainly on lot-of-cuda-cores cards, on 1060 it's barely visible. Anyway, I recommend you to update because number of wrong hashes and rejects is significantly lower because of kernel optimisations. And hashrate fluctuate according to current block difficulty, maybe you were unlucky running when diff was higher  

are you guys using the last from ccminer?

[car1999]

@signatum

If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help.

[palgin]

@palgin
Can you please also speed up the sgminer for AMD RX400/RX500?
Thanks

I may take a look, but I haven't got any AMD for testing, I can't compete with Wolf0

@palgin If this coin spikes high and I actually make a gain, pass me your btc address

Wow, didn't expect that. But if it'll spike, I'll remember you    

@signatum

If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help.

It works like bitcoin-qt. Follow these steps:

1) Open console from your wallet, "Help"->"Debug window"->"Console" tab
2) push following command: walletpassphrase <passphrase> 600
3) push following command: importprivkey <signatumprivkey>

Done

[blissz]

@signatum

If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help.

It works like bitcoin-qt. Follow these steps:

1) Open console from your wallet, "Help"->"Debug window"->"Console" tab
2) push following command: walletpassphrase <passphrase> 600
3) push following command: importprivkey <signatumprivkey>

Done

That's how to do that yes. You can skip step 2 if you haven't encrypted your wallet yet.

[car1999]

@signatum

If I generate a paper wallet using http://paperwallet.signatum.io/, and mine some coins to the address in the paper wallet, how to import the private key and coins to a wallet, so I can send the coins to other address? I tried windows wallet, cannot find a *import private key* menu or button, please help.

It works like bitcoin-qt. Follow these steps:

1) Open console from your wallet, "Help"->"Debug window"->"Console" tab
2) push following command: walletpassphrase <passphrase> 600
3) push following command: importprivkey <signatumprivkey>

Done

That's how to do that yes. You can skip step 2 if you haven't encrypted your wallet yet.

I believe there was a private key in the origin wallet, then I import another private key, maybe more other private keys, does these private keys work well together?

[blissz]

I believe there was a private key in the origin wallet, then I import another private key, maybe more other private keys, does these private keys work well together?

yes you can import multiple private keys in one wallet.

[sonerbo]

@palgin

ı try to mine with tree r9 380 but sgminer doesnt founds any accepted shares. Low diff share rejected

[Sam123]

Hello,
Can somebody post please the  command line to mine on Windows with Nvidea Card using suprnova pool
Thanks