[ANN] Signatum - New Algorithm - Fair Launch - No Premine

[Megalomaniac]

HI guys

Im mining with AMD cards:

4x MSI 470 4gb. Core clock: 1320. Memory: 1650     15.6/15.8 Mh/s
2x XFX 470 4gb Core clock:1265  Memory: 1725      14.6 Mh/s

I: 20

BIOS moddified for ETH/ETC mining.

92Mh/s aprox with the 6 cards.

If someone has a better configuration will be good to know.

[lojaman]

Hi, I having trouble getting my miner(sig-miner) setup to run right. Windows 10. have 5x R9 390's only getting 2mh/s on each.
Bat file:

setx GPU_MAX_ALLOC_PERCENT 100

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u XXXXXXXX -p XXXXXXXXXX -I 20

Any help would be appreciated..... Also does it matter what drivers Im using. (15.12 Crimson). I did update drivers but same issue...

This is suited more for Nvidia GPU's rather than AMD. It may be that your R 390x's are just too outdated (Please correct me if I am wrong).
People have also reported that their RX470/480 is only giving them 5 -10mh per card.
Might be worth sticking to Ether or something else that uses suitable algo.

HI guys

xfx 480 8gb Core clock:1320 Memory: 2200   18.03Mh/s
msi 480 8gb Core clock:1266 Memory: 2150   17.18Mh/s

I 20

BIOS moddified for ETH

My R9 390 and R9 390x gives me about 9Mh/s each so I left them to eth

[lentyna]

xfx 480 8gb Core clock:1320 Memory: 2200   18.03Mh/s
msi 480 8gb Core clock:1266 Memory: 2150   17.18Mh/s

I get similar on my RX580s 8GB

[CjMapope]

Can someone help me understand whats going on with the additional fork (GUY), that's now reforking? WHY?

tbh, that coin has nothing to do with SIGT, and IMO, was just made to either:
1 - take hashrate off SIGT miners chain for more rewards for them SIGT mining
2 - just to piggyback off the popularity of SIGT

Why is it forking? cause they just cloned a coin they had no idea to read the codebase of likely

"GUY" is garbage, forget about it ;p

[sanbashiyi]

Nethash  is 980,638.83 MH/s now , that's really amazing me   

i mine in begin and the network hash only 1/10 than now

lol , go signatum !

[lucifercipher]

supernova maintenance caused hash rates drop. Its back up again .

[zecon]

Thanks for the dip (aka gift)!

$SIGT is setup to be a very profitable coins from most all angles.

[cryptolelefla]

Hi, I having trouble getting my miner(sig-miner) setup to run right. Windows 10. have 5x R9 390's only getting 2mh/s on each.
Bat file:

setx GPU_MAX_ALLOC_PERCENT 100

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u XXXXXXXX -p XXXXXXXXXX -I 20

Any help would be appreciated..... Also does it matter what drivers Im using. (15.12 Crimson). I did update drivers but same issue...

This is suited more for Nvidia GPU's rather than AMD. It may be that your R 390x's are just too outdated (Please correct me if I am wrong).
People have also reported that their RX470/480 is only giving them 5 -10mh per card.
Might be worth sticking to Ether or something else that uses suitable algo.

HI guys

xfx 480 8gb Core clock:1320 Memory: 2200   18.03Mh/s
msi 480 8gb Core clock:1266 Memory: 2150   17.18Mh/s

I 20

BIOS moddified for ETH

My R9 390 and R9 390x gives me about 9Mh/s each so I left them to eth

using sgminer on first thread my rig 7x rx470 4gb event't start

[MarcusDe]

I hope you understand, that at this price you get more if you shut down your hardware and for that electricity cost buy coins on exchange?

[cryptolelefla]

I hope you understand, that at this price you get more if you shut down your hardware and for that electricity cost buy coins on exchange?

buyed some today  
just want to be ready with setup... my 1060 rig run nice.. i was wondering if it can be mined with amd

[ocminer]

supernova maintenance caused hash rates drop. Its back up again .

actually it was only the frontend that was down.. the stratum was running all the time since it's on a separate server...

[mappo]

Hi, I having trouble getting my miner(sig-miner) setup to run right. Windows 10. have 5x R9 390's only getting 2mh/s on each.
Bat file:

setx GPU_MAX_ALLOC_PERCENT 100

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u XXXXXXXX -p XXXXXXXXXX -I 20

Any help would be appreciated..... Also does it matter what drivers Im using. (15.12 Crimson). I did update drivers but same issue...

This is suited more for Nvidia GPU's rather than AMD. It may be that your R 390x's are just too outdated (Please correct me if I am wrong).
People have also reported that their RX470/480 is only giving them 5 -10mh per card.
Might be worth sticking to Ether or something else that uses suitable algo.

HI guys

xfx 480 8gb Core clock:1320 Memory: 2200   18.03Mh/s
msi 480 8gb Core clock:1266 Memory: 2150   17.18Mh/s

I 20

BIOS moddified for ETH

My R9 390 and R9 390x gives me about 9Mh/s each so I left them to eth

4 x ASUS OC top ed 580 8GB  Core: 1411 Mem: 2090     19.8Mh/s
2 x MSI Aorus 580 8GB          Core: 1350 Mem: 2150     18.8Mh/s

I 20 - Any higher is unstable

BIOS modded for ETH @ 28.6Mh/s

Total hash 6cards 116Mh/s

ASUS OC Top ed is by far the best 580 I've used (compared to MSI & Gigabyte) and Currently I mine about 20-24 coins per hour which @ $0.02 per coin is about $10.5 p.d. compared to 162Mh/s with ETH and mining approx $9 p.d.

I'm pretty sure R9 XXX cards are not supported on this miner as they are "too old" for this new algo.

[NameTaken]

supernova maintenance caused hash rates drop. Its back up again .

actually it was only the frontend that was down.. the stratum was running all the time since it's on a separate server...

My miner did stop receiving work intermittently so I added a backup pool.

[avilolo0101]

there is any problems with the supernova pool?
i cant conect to the pool

[Coryvmcs1]

there is any problems with the supernova pool?
i cant conect to the pool

pool.minertopia.org is working

[mitch8128]

supernova maintenance caused hash rates drop. Its back up again .

actually it was only the frontend that was down.. the stratum was running all the time since it's on a separate server...

thought so, since i earned the same if not more because people left the pool thinking it was down

[CEKTAHT]

Hi, I having trouble getting my miner(sig-miner) setup to run right. Windows 10. have 5x R9 390's only getting 2mh/s on each.
Bat file:

setx GPU_MAX_ALLOC_PERCENT 100

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u XXXXXXXX -p XXXXXXXXXX -I 20

Any help would be appreciated..... Also does it matter what drivers Im using. (15.12 Crimson). I did update drivers but same issue...

This is suited more for Nvidia GPU's rather than AMD. It may be that your R 390x's are just too outdated (Please correct me if I am wrong).
People have also reported that their RX470/480 is only giving them 5 -10mh per card.
Might be worth sticking to Ether or something else that uses suitable algo.

No need to overclock the memory, If you'll downcloack it to 1400-1500, you'll get the same result with less power consumption
HI guys

xfx 480 8gb Core clock:1320 Memory: 2200   18.03Mh/s
msi 480 8gb Core clock:1266 Memory: 2150   17.18Mh/s

I 20

BIOS moddified for ETH

My R9 390 and R9 390x gives me about 9Mh/s each so I left them to eth

4 x ASUS OC top ed 580 8GB  Core: 1411 Mem: 2090     19.8Mh/s
2 x MSI Aorus 580 8GB          Core: 1350 Mem: 2150     18.8Mh/s

I 20 - Any higher is unstable

BIOS modded for ETH @ 28.6Mh/s

Total hash 6cards 116Mh/s

ASUS OC Top ed is by far the best 580 I've used (compared to MSI & Gigabyte) and Currently I mine about 20-24 coins per hour which @ $0.02 per coin is about $10.5 p.d. compared to 162Mh/s with ETH and mining approx $9 p.d.

I'm pretty sure R9 XXX cards are not supported on this miner as they are "too old" for this new algo.

[oisilener1982]

Why are miners leaving @ suprnova?

6100 workers 3 days ago and it is down to 3900

[Mikanoshi]

For stupid shit like GUY coin. They'll come back, don't worry))

[Coryvmcs1]

come to pool.minertopia.org

ccminer -a skunk  -o stratum+tcp://stratum.minertopia.org:8433 -u <WALLET_ADDRESS> [-p <OPTIONS>]