And how do we know its synced ? i only get a blinking dot...
Blockchain is not so large yet, so wait a couple of minutes.
is there a command to see this ?
tail debug.log
just open debug log file and see when stop flooding heigh=xxx
IRC got join
connection timeout
trying connection 198.199.86.4 lastseen=0.0hrs
IRC got join
IRC got join
Added 50.137.151.133:7688 from 92.243.23.21: 17 tried, 308 new
IRC got new address: 50.137.151.133:7688
connection timeout
trying connection 86.157.191.43:9223 lastseen=0.1hrs
connected 86.157.191.43:9223
send version message: version 60001, blocks=0, us=82.168.107.39:9223, them=86.157.191.43:9223, peer=86.157.191.43:9223
trying connection 198.199.86.4 lastseen=0.0hrs
Added time data, samples 6, offset +2 (+0 minutes)
receive version message: version 60001, blocks=4992, us=82.168.107.39:53994, them=86.157.191.43:9223, peer=86.157.191.43:9223
IRC got join
received block ee79864ed6088eaef4c6
ERROR: CheckProofOfWork() : nBits below minimum work
ERROR: CheckBlock() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
received block 93fc3aef72622cded90d
ERROR: CheckProofOfWork() : nBits below minimum work
ERROR: CheckBlock() : proof of work failed
ERROR: ProcessBlock() : CheckBlock FAILED
disconnecting node 86.157.191.43:9223
Disconnected 86.157.191.43:9223 for misbehavior (score=100)
IRC got join
connection timeout
trying connection 54.245.12.125:9223 lastseen=0.1hrs
IRC got join
connection timeout
trying connection 198.199.86.4 lastseen=0.0hrs
connection timeout
trying connection 118.210.234.30:9223 lastseen=0.1hrs
connected 118.210.234.30:9223
send version message: version 60001, blocks=0, us=82.168.107.39:9223, them=118.210.234.30:9223, peer=118.210.234.30:9223
trying connection 198.199.86.4 lastseen=0.0hrs