warnerdark
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 19, 2018, 03:15:18 PM |
|
Thank you very much tutulfo, with this new version I have the "power avg" and those by card in the menu "Current". The column "Power" shows me the total power of my cards but for example, for a neoscrypt interval, the value is at 408 W => 6 X 68 W with a power output power of about 800 W but if I do the sgminerPhi, the value "Power" is the same while the real power of the rig is about 710 W. The power for each card is also the same. I know there is a power difference between the total power of the cards and the power output power of the rig is there any way to change the "core.ps1" on line 1019 to get a more accurate value from each card?
thank you in advance
PS: meanwhile I replaced on line 1019 "$ _. PowerLive = ($ Cards | Where-Object gpugroup -eq ($ ActiveMiners [$ _. IdF] .GpuGroup.GroupName) | Measure-Object -property power_draw - sum) .sum " by " $ _. PowerLive = 818 "which is my average power read on the wattmeter
|
|
|
|
tutulfo (OP)
|
|
March 19, 2018, 04:06:06 PM |
|
Thank you very much tutulfo, with this new version I have the "power avg" and those by card in the menu "Current". The column "Power" shows me the total power of my cards but for example, for a neoscrypt interval, the value is at 408 W => 6 X 68 W with a power output power of about 800 W but if I do the sgminerPhi, the value "Power" is the same while the real power of the rig is about 710 W. The power for each card is also the same. I know there is a power difference between the total power of the cards and the power output power of the rig is there any way to change the "core.ps1" on line 1019 to get a more accurate value from each card?
thank you in advance
PS: meanwhile I replaced on line 1019 "$ _. PowerLive = ($ Cards | Where-Object gpugroup -eq ($ ActiveMiners [$ _. IdF] .GpuGroup.GroupName) | Measure-Object -property power_draw - sum) .sum " by " $ _. PowerLive = 818 "which is my average power read on the wattmeter
For AMD power is estimated, AMD overdrive api hasn´t method for getting power drawn like Nvidia SMI. Estimation formula is: A fixed value for each model of card (135W for a RX480) * Power Limit * GPU usage If you can read your power for each algo, post it and I will add an Algo correction Factor to formula.
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
warnerdark
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 19, 2018, 07:47:21 PM Last edit: March 20, 2018, 10:05:20 PM by warnerdark |
|
Thank you very much tutulfo, with this new version I have the "power avg" and those by card in the menu "Current". The column "Power" shows me the total power of my cards but for example, for a neoscrypt interval, the value is at 408 W => 6 X 68 W with a power output power of about 800 W but if I do the sgminerPhi, the value "Power" is the same while the real power of the rig is about 710 W. The power for each card is also the same. I know there is a power difference between the total power of the cards and the power output power of the rig is there any way to change the "core.ps1" on line 1019 to get a more accurate value from each card?
thank you in advance
PS: meanwhile I replaced on line 1019 "$ _. PowerLive = ($ Cards | Where-Object gpugroup -eq ($ ActiveMiners [$ _. IdF] .GpuGroup.GroupName) | Measure-Object -property power_draw - sum) .sum " by " $ _. PowerLive = 818 "which is my average power read on the wattmeter
For AMD power is estimated, AMD overdrive api hasn´t method for getting power drawn like Nvidia SMI. Estimation formula is: A fixed value for each model of card (135W for a RX480) * Power Limit * GPU usage If you can read your power for each algo, post it and I will add an Algo correction Factor to formula. Here are the values obtained on my RIG : ALGO MH/s POWER WATTMETER POWER LIMIT bitcore 53 720 50% for all blake2s 4600 690 CRYPTONIGHT 0.0034 720 equihash 0.00168 840 etherum 103 835 GROESTL 115.5 695 hsr 36 715 keccak 1420 705 lyra2v2 66 710 lyra2z 2.6 750 MYRIAD-GROESTL 186 700 NEOSCRYPTa2 4.36 800 PASCAL 3300 690 PHI 72.9 710 SKEIN 1300 690 TRIBUS 173 700 x11ghost 4.17 725 XEVAN 8 720 EDIT : with a lot of research, I found a way to recover the power values of each card in real time. The method I found is to associate 2 free software: HWInfo - https://www.hwinfo.com/download.phpand RemoteSensorMonitor - https://www.hwinfo.com/forum/Thread-Introducing-Remote-Sensor-Monitor-A-RESTful-Web-Serverthen I run HWiNFO64.exe having set its parameters so that it automatically gets minimized and without the welcome window. then on the command line "Remote Sensor Monitor.exe" --gpuz = 0 --aida64 = 0 --ohm = 0 --hwinfo = 1 " in the browser, I type the local IP address followed by the default port 55555 and so the sensor values of all the hardware appear. but the interesting values in my opinion is "SensorName": "GPU Chip Power", and "SensorValue": XXX Watts would it be possible to incorporate the sum of the power results of all GPUS from RemoteSensorMonitor to MegaMiner with the variable PowerLive at line 1019 in core.ps1 I know it's DIY, but I think it will improve stats accuracy at least while waiting for a more improved version of OverdriveN.exe for GPU power values.
|
|
|
|
bttalkdim2
Newbie
Offline
Activity: 30
Merit: 0
|
|
March 21, 2018, 11:26:47 AM |
|
I tried 6.1 yesterday, one pool Ahashpool. Benchmakr finished successfully. Today in morming I see that few hours MM mined x17, it's usually most profitable. Then PHI, it's sometimes also profitable. But last 2 hours MM mined "xevan" algoritm. x17 and PHI are disapeard from the available list (on main MM screen).
Only after restart of MM - x17 and PHI were available again.
So for some reason these algoritms were removed and problem - they not came back automatically! (after each 1800 sec rescan) Only need to restart MM. I think same problem was and with version 6.0. (no problems in 5.X)
|
|
|
|
tutulfo (OP)
|
|
March 24, 2018, 08:23:21 AM |
|
I tried 6.1 yesterday, one pool Ahashpool. Benchmakr finished successfully. Today in morming I see that few hours MM mined x17, it's usually most profitable. Then PHI, it's sometimes also profitable. But last 2 hours MM mined "xevan" algoritm. x17 and PHI are disapeard from the available list (on main MM screen).
Only after restart of MM - x17 and PHI were available again.
So for some reason these algoritms were removed and problem - they not came back automatically! (after each 1800 sec rescan) Only need to restart MM. I think same problem was and with version 6.0. (no problems in 5.X)
One combination (pool/miner/algo/power limit) is disabled after 3 fails, I have add to source code that this "cancellation" must be reseted each 6 hours to prevent this situation
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
jbonifacio
Newbie
Offline
Activity: 39
Merit: 0
|
|
March 26, 2018, 02:17:38 AM Last edit: March 27, 2018, 01:27:30 AM by jbonifacio |
|
Tutulfo, how can I call the API using curl? I have no problems with a browser if just click OK when prompted for credentials. But I can't seem to figure out how to pull the json using curl. Thanks. EDIT: When I say API I'm talking about the new monitoring service. Here's the URL I use: http://192.168.1.100:9999 EDIT2: I figured out how to get it to work using WGET and the output is redirected to stdout: wget -O - http://192.1168.1.12:9999 --auth-no-challenge --user=[your window login id] --password [your windows password] 2>/dev/null
|
|
|
|
tutulfo (OP)
|
|
March 28, 2018, 06:12:59 PM |
|
Tutulfo, how can I call the API using curl? I have no problems with a browser if just click OK when prompted for credentials. But I can't seem to figure out how to pull the json using curl. Thanks. EDIT: When I say API I'm talking about the new monitoring service. Here's the URL I use: http://192.168.1.100:9999 EDIT2: I figured out how to get it to work using WGET and the output is redirected to stdout: wget -O - http://192.1168.1.12:9999 --auth-no-challenge --user=[your window login id] --password [your windows password] 2>/dev/null No idea, sorry I never used curl
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
alucard20724
|
|
April 01, 2018, 05:18:08 PM Last edit: April 02, 2018, 04:02:53 AM by alucard20724 |
|
So i'm new to megaminer (long time user of mpm) and i see it has a lot more optimized options for AMD cards, and i can now utilize all the optimized miners for AMD. My question is: Has anyone gotten x16r to work with megaminer. https://github.com/brian112358/sgminer-x16r/releasesI run it standalone fine, but when i try it under mega miner, i get a "detecting miner error" any help would be great. thanks.
|
|
|
|
tutulfo (OP)
|
|
April 02, 2018, 05:28:31 PM |
|
So i'm new to megaminer (long time user of mpm) and i see it has a lot more optimized options for AMD cards, and i can now utilize all the optimized miners for AMD. My question is: Has anyone gotten x16r to work with megaminer. https://github.com/brian112358/sgminer-x16r/releasesI run it standalone fine, but when i try it under mega miner, i get a "detecting miner error" any help would be great. thanks. I have been testing and I can´t make it work with blazepool manually. I think it only works with certains pools/protocols
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
alucard20724
|
|
April 03, 2018, 03:59:05 AM |
|
So i'm new to megaminer (long time user of mpm) and i see it has a lot more optimized options for AMD cards, and i can now utilize all the optimized miners for AMD. My question is: Has anyone gotten x16r to work with megaminer. https://github.com/brian112358/sgminer-x16r/releasesI run it standalone fine, but when i try it under mega miner, i get a "detecting miner error" any help would be great. thanks. I have been testing and I can´t make it work with blazepool manually. I think it only works with certains pools/protocols it works with zergpool standalone. i haven't tried it with blazepool yet. edit: just tried with blazepool and it works fine. here's my startup line sgminer.exe -k x16r -o stratum+tcp://x16r.mine.blazepool.com:3636 -u pewpewohnoyoudidnot -p AMDi5930K1,c=BTC -I 20 --gpu-threads 2 --gpu-platform 1
|
|
|
|
tutulfo (OP)
|
|
April 03, 2018, 09:59:25 AM |
|
So i'm new to megaminer (long time user of mpm) and i see it has a lot more optimized options for AMD cards, and i can now utilize all the optimized miners for AMD. My question is: Has anyone gotten x16r to work with megaminer. https://github.com/brian112358/sgminer-x16r/releasesI run it standalone fine, but when i try it under mega miner, i get a "detecting miner error" any help would be great. thanks. I have been testing and I can´t make it work with blazepool manually. I think it only works with certains pools/protocols it works with zergpool standalone. i haven't tried it with blazepool yet. edit: just tried with blazepool and it works fine. here's my startup line sgminer.exe -k x16r -o stratum+tcp://x16r.mine.blazepool.com:3636 -u pewpewohnoyoudidnot -p AMDi5930K1,c=BTC -I 20 --gpu-threads 2 --gpu-platform 1 Your startup line in my system don´t work (I must change gpu-platform to 2).
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
alucard20724
|
|
April 03, 2018, 02:46:20 PM |
|
So i'm new to megaminer (long time user of mpm) and i see it has a lot more optimized options for AMD cards, and i can now utilize all the optimized miners for AMD. My question is: Has anyone gotten x16r to work with megaminer. https://github.com/brian112358/sgminer-x16r/releasesI run it standalone fine, but when i try it under mega miner, i get a "detecting miner error" any help would be great. thanks. I have been testing and I can´t make it work with blazepool manually. I think it only works with certains pools/protocols it works with zergpool standalone. i haven't tried it with blazepool yet. edit: just tried with blazepool and it works fine. here's my startup line sgminer.exe -k x16r -o stratum+tcp://x16r.mine.blazepool.com:3636 -u pewpewohnoyoudidnot -p AMDi5930K1,c=BTC -I 20 --gpu-threads 2 --gpu-platform 1 Your startup line in my system don´t work (I must change gpu-platform to 2). gpu platform is dependent on the individual platform... sometimes 1, or 0 for me... because of either IGPU or multiple cards from different companies i.e. AMD and/or Nvidia in the same system
|
|
|
|
vitlab
Newbie
Offline
Activity: 86
Merit: 0
|
|
April 07, 2018, 03:03:14 PM Last edit: April 07, 2018, 03:58:29 PM by vitlab |
|
Is it possible to set up two MPH pools in Zergpool? I can not figure out how to set it up. Please, help. Thank you. how to create a .bat file to immediately run MPH mining with auto-exchange selection pools
cd %~dp0
:LOOP powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1 -MiningMode Automatic -PoolsName MiningPoolHub LOOP what is wrong?
|
|
|
|
b20lopez
Member
Offline
Activity: 154
Merit: 10
|
|
April 07, 2018, 04:59:11 PM |
|
Is it possible to select what algos will MM use? I have 1080tis so i dont care about eth or dual mining. I just need to select algos instead coins and use it to autoexchange pools. They exchange all to btc, so let the pool mine all coins in selected algo.
|
|
|
|
alucard20724
|
|
April 07, 2018, 09:24:14 PM |
|
Is it possible to select what algos will MM use? I have 1080tis so i dont care about eth or dual mining. I just need to select algos instead coins and use it to autoexchange pools. They exchange all to btc, so let the pool mine all coins in selected algo.
yes... in the config.txt line 165 @@ALGORITHMS_NVIDIA=bitcore,blakecoin,c11,cryptonight,Equihash,Ethash,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,groestl,hsr,jha,keccakc,lyra2v2,lyra2z,Myriad-groestl,Neoscrypt,nist5,pascal,phi,polytimos,sib,skein,skunk,timetravel,tribus,veltor,whirpool,x11evo,x11gost,x14,x16r,x17,xevan,yescrypt delete the "--" at the front of the line, and delete any algos you don't want to run.
|
|
|
|
CryptoCoin101
Newbie
Offline
Activity: 140
Merit: 0
|
|
April 11, 2018, 07:13:48 AM |
|
Any binaries?
|
|
|
|
tutulfo (OP)
|
|
April 11, 2018, 05:04:11 PM |
|
Any binaries?
Not necesary
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
alucard20724
|
|
April 17, 2018, 12:59:36 AM |
|
is there a way to set the PoolFee for a particular pool?
The fee for zergpool is now 0.5%, a week ago it was 0.25%... a week before that it was free.
|
|
|
|
tutulfo (OP)
|
|
April 19, 2018, 04:53:57 AM |
|
is there a way to set the PoolFee for a particular pool?
The fee for zergpool is now 0.5%, a week ago it was 0.25%... a week before that it was free.
I will upload a new release soon with this bug fixed.
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
tutulfo (OP)
|
|
April 20, 2018, 08:59:30 AM |
|
6.2 Release
---FEATURES CHANGES:
* Cancelled miners due to fails will be retried after 6 hours * New CryptonightV7, x16r, x16s ans x12 algos
---POOLS CHANGES: * Enabled 24h mode for zergpool
---MINERS CHANGES:
* Updated ccminer tpruvot to 2.2.5 * Updated cpu xmrig to v2.6.0-beta2 * Added nvdia xmrig v2.6.0-beta1 * Updated Claymore ETH to 11.6 * Updated Phoenixminer to 2.8c * Updated bminer to 6.1.0 * Replaced ccminer x16 for enemy 1.05 release * Updated Claymore-cryptonote to 11.3 * Updated ccminer klausT to 8.21 * Updated cpuminer Jayddee to 3.8.7.2
---BUG FIXES:
* Blazepool Wallet not shown * Claymore Neoscrypt for AMD not using selected devices * Wrong Zergpool fee
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
|