Megaminer 6.3 - Multi pool / Multi Algo launcher

[alucard20724]

6.2 Release


---FEATURES CHANGES:

* Cancelled miners due to fails will be retried after 6 hours
* New CryptonightV7, x16r, x16s ans x12 algos



---POOLS CHANGES:
* Enabled 24h mode for zergpool


---MINERS CHANGES:

* Updated ccminer tpruvot to 2.2.5
* Updated cpu xmrig to v2.6.0-beta2
* Added nvdia xmrig v2.6.0-beta1
* Updated Claymore ETH to 11.6
* Updated Phoenixminer to 2.8c
* Updated bminer to 6.1.0
* Replaced ccminer x16 for enemy 1.05 release
* Updated Claymore-cryptonote to 11.3
* Updated ccminer klausT to 8.21
* Updated cpuminer Jayddee to 3.8.7.2


---BUG FIXES:

* Blazepool Wallet not shown
* Claymore Neoscrypt for AMD not using selected devices
* Wrong Zergpool fee

could you update Claymore Neoscrypt to 1.2?

thanks.

[Bastelhouse]

Zergpool changed recently the Stratum Servers to <ALGO>.mine.zergpool.com:<PORT>.

noticed that MM connects only to mine.zergpool.com:PORT.

this should be changed before the old stratums will get shutdown.

[twente-mining]

The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine  

While benching 1 rig i get this message, and it stops

DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>

[Bastelhouse]

The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine  

While benching 1 rig i get this message, and it stops

DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>

i think this could be caused from the N-CcminerX16r.json file in the Miners Folder... Cause there is a is double X16r on X16r and s.

But not tested yet

[tutulfo]

6.2 Release


---FEATURES CHANGES:

* Cancelled miners due to fails will be retried after 6 hours
* New CryptonightV7, x16r, x16s ans x12 algos



---POOLS CHANGES:
* Enabled 24h mode for zergpool


---MINERS CHANGES:

* Updated ccminer tpruvot to 2.2.5
* Updated cpu xmrig to v2.6.0-beta2
* Added nvdia xmrig v2.6.0-beta1
* Updated Claymore ETH to 11.6
* Updated Phoenixminer to 2.8c
* Updated bminer to 6.1.0
* Replaced ccminer x16 for enemy 1.05 release
* Updated Claymore-cryptonote to 11.3
* Updated ccminer klausT to 8.21
* Updated cpuminer Jayddee to 3.8.7.2


---BUG FIXES:

* Blazepool Wallet not shown
* Claymore Neoscrypt for AMD not using selected devices
* Wrong Zergpool fee

could you update Claymore Neoscrypt to 1.2?

thanks.

updated

[nitrobg]

Phoenix has 2.9c, nv-xmrig has 2.6.1, enemy miner - 1.08.

[tutulfo]

 
6.2.1 Release

---POOLS CHANGES:
* Zergpool: Changed stratum servers to algo.zergpool.com


---MINERS CHANGES:

* Updated Claymore Neoscrypt to 1.2
* Updated ccminerX16r to Enemy 1.08
* Added new miners X16s and x16r for AMD


---BUG FIXES:

* Duplicated algo in ccminerx16R
* Wrong algo x17 on ccminerx16R

[tutulfo]

The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine  

While benching 1 rig i get this message, and it stops

DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>

Bug Fixed in latest release.


Monitor cfg is easy

   - set @@APIPORT=9999 (or any number) in each monitorized machine
   - set a list of monitorized machines in  @@FARMRIGS variable (only on monitor machine)
   - optional, set your mail cfg to get notifications when a rig goes offline

[twente-mining]

The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine  

While benching 1 rig i get this message, and it stops

DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>

Bug Fixed in latest release.


Monitor cfg is easy

   - set @@APIPORT=9999 (or any number) in each monitorized machine
   - set a list of monitorized machines in  @@FARMRIGS variable (only on monitor machine)
   - optional, set your mail cfg to get notifications when a rig goes offline

Can't get the monitor to work. Entered api 9999 in every rig, and on the monitormachine entered local ip adresses and names ..
When i start i only get not responding, not even the local machine.

So unless there is some info missing, it does not work here.
Settings in router maybe ?

[tutulfo]

The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine  

While benching 1 rig i get this message, and it stops

DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>

Bug Fixed in latest release.


Monitor cfg is easy

   - set @@APIPORT=9999 (or any number) in each monitorized machine
   - set a list of monitorized machines in  @@FARMRIGS variable (only on monitor machine)
   - optional, set your mail cfg to get notifications when a rig goes offline

Can't get the monitor to work. Entered api 9999 in every rigs, and on the monitormachine entered local ip adresses and names ..
When i start i only get not responding, not even the local machine.

So unless there is some info missing, it does not work here.
Settings in router maybe ?

 MM automatically add exclusion to firewall on monitored rig and local machine cant fail by this one, you can test:

- do you have api window open in each monitored rig?, is a powershell screen (not MM one).
- Check if you get a json response in your browser from your monitor machine, put http://MONITOREDIP:PORT


This is an example of config

@@FARMRIGS=[{"IpOrLanName":"moneymachine", "ApiPort":"9999","Notifications":"true"},{"IpOrLanName":"filemon", "ApiPort":"9999","Notifications":"true"},{"IpOrLanName":"localhost", "ApiPort":"9999","Notifications":"true"}]

[alucard20724]

new miners X16s and x16r for AMD not working.  miner window just keeps closing at the start of benchmarking

[dudel42]

is there a way to run MM as a farm monitor only? on a PC without mining?

[tutulfo]

is there a way to run MM as a farm monitor only? on a PC without mining?

Yes, you must run start.bat and select “monitorize your farm” option

[JukNi]

Hi

I did updater nVidia drivers to latest 397.64 and now Megaminer wont start up.
If I run GPULIST.bat only that it shows is that pause command "Press any key to continue", but no any GPU´s

When I start it using start.bat what was working just fine before update I do get next messages:

First message:

"WARNING: No gpus for group  was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect
@@gpugroups config"

Second message "NO MINERS!"

And this is log:

Code:

05/09/2018 18:58:49...... Release 6.2.1
05/09/2018 18:58:50...... Starting Parameters:  //Algorithm:  //PoolsName: Zpool //CoinsName:  //MiningMode: AUTOMATIC //Groupnames:  //PercentToSwitch: 
05/09/2018 18:58:50...... No gpus for group  was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect @@gpugroups config
05/09/2018 18:59:00...... New interval starting.............
05/09/2018 18:59:34...... "AverageCpu = 2 % | MemoryUsage = 19,00 % | VirtualMemoryUsage = 9,42 % |  PercentCFree = 88,44 % | Processes = 121 | Connections = 46"
05/09/2018 18:59:34...... Next interval will be 300
05/09/2018 18:59:34...... Loading Pools Information.............
05/09/2018 18:59:34...... Pool Zpool was responsive....
05/09/2018 18:59:34...... Detected 33 pools......
05/09/2018 18:59:34...... 33 pools left after min workers filter.....
05/09/2018 18:59:34...... Coindesk api was responsive..........
05/09/2018 18:59:34...... Files in miner folder: 46
05/09/2018 18:59:34...... Number of gpu groups: 0
05/09/2018 18:59:34...... Miners/Pools combinations detected: 0.........
05/09/2018 18:59:34...... NO MINERS!

All GPU´s are shown in device manager and miners launched from command prompt works just fine, excavator works fine.

[UPDATE] Reverting back to 391.35 everything work like it should.

[bitcoinminer0319]

how do i specific a coin? i want to mine rvn. 

[tutulfo]

how do i specific a coin? i want to mine rvn. 

You can use start.bat selecting manual mode or also you can use coinsname parameter in your batch file like examples.

[bitcoinminer0319]

can i use it on windows 10 32bit system or not?

[jbonifacio]

can i use it on windows 10 32bit system or not?

I will guess that the answer will be yes/no. Some of the miners that MegaMiner uses may require a 64bit platform.

[tutulfo]

can i use it on windows 10 32bit system or not?

I will guess that the answer will be yes/no. Some of the miners that MegaMiner uses may require a 64bit platform.

true, you can use but you must delete all 64 bits miners or replace manually for 32 bits releases

[tutulfo]

Hi

I did updater nVidia drivers to latest 397.64 and now Megaminer wont start up.
If I run GPULIST.bat only that it shows is that pause command "Press any key to continue", but no any GPU´s

When I start it using start.bat what was working just fine before update I do get next messages:

First message:

"WARNING: No gpus for group  was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect
@@gpugroups config"

Second message "NO MINERS!"

And this is log:

Code:

05/09/2018 18:58:49...... Release 6.2.1
05/09/2018 18:58:50...... Starting Parameters:  //Algorithm:  //PoolsName: Zpool //CoinsName:  //MiningMode: AUTOMATIC //Groupnames:  //PercentToSwitch: 
05/09/2018 18:58:50...... No gpus for group  was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect @@gpugroups config
05/09/2018 18:59:00...... New interval starting.............
05/09/2018 18:59:34...... "AverageCpu = 2 % | MemoryUsage = 19,00 % | VirtualMemoryUsage = 9,42 % |  PercentCFree = 88,44 % | Processes = 121 | Connections = 46"
05/09/2018 18:59:34...... Next interval will be 300
05/09/2018 18:59:34...... Loading Pools Information.............
05/09/2018 18:59:34...... Pool Zpool was responsive....
05/09/2018 18:59:34...... Detected 33 pools......
05/09/2018 18:59:34...... 33 pools left after min workers filter.....
05/09/2018 18:59:34...... Coindesk api was responsive..........
05/09/2018 18:59:34...... Files in miner folder: 46
05/09/2018 18:59:34...... Number of gpu groups: 0
05/09/2018 18:59:34...... Miners/Pools combinations detected: 0.........
05/09/2018 18:59:34...... NO MINERS!

All GPU´s are shown in device manager and miners launched from command prompt works just fine, excavator works fine.

[UPDATE] Reverting back to 391.35 everything work like it should.

I have installed 397.64  and no problem here, I will upload today new code to github master with nvdia-smi updated to this release.