deevilknight
Jr. Member
Offline
Activity: 37
Merit: 10
|
|
August 08, 2017, 12:59:23 PM |
|
For which Windows are this drivers? How to install them, when i click on update display driver from device manager and try to navigate in folder where i unpack this drivers he doesn't see that folder.
|
|
|
|
LoneRangir
|
|
August 08, 2017, 01:41:05 PM |
|
I dont know if its bug with the drivers or the 9.8 version of claymore but on about half my machines
the hash rate goes from 28ms or so to 8 and stays there till i have to reboot the rigs
I find that if I go into WattMan and toggle 'Voltage Control' and hit apply, the card will go back to hashing at full rate. You don't have to actually change any voltage settings, but just flip the mode it unsticks the card. I've been having to do this to my RX480 cards for months. Not so much for the RX470s.
|
|
|
|
bijac666
Newbie
Offline
Activity: 11
Merit: 0
|
|
August 08, 2017, 01:45:27 PM |
|
The driver gives a nice update to my Rx 570 cards, but I noticed that the power usage pulling from the wall goes crazy.
Before I had five rx 570 at 1105/2200 850mV cpu/mem voltage and it pulled 730W from wall.
After the driver update with the same settings I get 2.2MH/s more but the voltage from the wall is going crazy. Jumping from 530W up to 980W, does someone know the reason and how to fix it? Did anyone else notice this?
|
|
|
|
gleidsonrpm
Newbie
Offline
Activity: 12
Merit: 0
|
|
August 08, 2017, 02:06:16 PM |
|
My 4 rx 470 is with bios mod, To upgrade do I have that back to the original bios? Or can I upgrade with mod bios?
|
|
|
|
papi92
Jr. Member
Offline
Activity: 59
Merit: 1
|
|
August 08, 2017, 02:09:05 PM |
|
gleidsonrpm, you don't have to flash original bios. Just update the driver.
|
BTC: 16AqeaykkdPcRQVFJKpLyic2Di3eoY8Y1U
|
|
|
h311m4n
|
|
August 08, 2017, 02:13:39 PM |
|
The driver gives a nice update to my Rx 570 cards, but I noticed that the power usage pulling from the wall goes crazy.
Before I had five rx 570 at 1105/2200 850mV cpu/mem voltage and it pulled 730W from wall.
After the driver update with the same settings I get 2.2MH/s more but the voltage from the wall is going crazy. Jumping from 530W up to 980W, does someone know the reason and how to fix it? Did anyone else notice this?
Yes, voltage control does not work from Watttool or Claymore with this driver update. You need to use afterburner or trixx to downvolt your cards for the moment, or mod it in the bios.
|
|
|
|
cdrx
|
|
August 08, 2017, 03:59:51 PM |
|
I am first timer. I have latest official update from AMD, modded bios with changed timings. and used atikmdag-patcher
To update, do I need to use again atikmdag-patcher to UNPATCH and restart.
Then update the driver with BETA ? and then use again atikmdag-patcher. Am I right ? Or else ? Thx. If I would have used also Afterburner, would I need to reset all to original, before updating, or will be saved?
|
|
|
|
karoolis
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 08, 2017, 04:21:43 PM |
|
So update went fine.
from 217 Mh/s UP to 230 Mh/s for my 8 GPU rig.
but all the good news ended then checked the watmeter and it was 1460w from wall instead of 1200w.
AB 4.4.0 beta 15 has no changes on wattmeter from wall while adjusting core voltage...
|
|
|
|
gleidsonrpm
Newbie
Offline
Activity: 12
Merit: 0
|
|
August 08, 2017, 04:33:37 PM |
|
|
|
|
|
karoolis
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 08, 2017, 04:36:27 PM |
|
patch your previouse drivers first.
|
|
|
|
gleidsonrpm
Newbie
Offline
Activity: 12
Merit: 0
|
|
August 08, 2017, 05:41:52 PM |
|
|
|
|
|
karoolis
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 08, 2017, 07:20:26 PM |
|
what about power consumption from wall?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1732
Up to 300% + 200 FS deposit bonuses
|
|
August 08, 2017, 07:24:48 PM |
|
So nobody tried this out with their R9 280X yet?
Why would they? Because if they fixed it on the 280X it would hash at 28MH/s like the Epoch #1
|
|
|
|
Jbodz83
Newbie
Offline
Activity: 124
Merit: 0
|
|
August 08, 2017, 08:50:59 PM |
|
How was the effective hashrate using this driver? is the reported hashrate in your rigs the same at the pool sites?
|
|
|
|
cidman
|
|
August 09, 2017, 12:32:06 AM |
|
wonder if nvidia is gonna fix the TLB thrashing too might be able to dust off the 750tis for 10Mh at 75 watts
|
|
|
|
Gunna01
|
|
August 09, 2017, 12:38:51 AM |
|
How was the effective hashrate using this driver? is the reported hashrate in your rigs the same at the pool sites? Hash rate reported by the pool and the miner are the same.
|
|
|
|
manotroll
|
|
August 09, 2017, 12:47:49 AM |
|
same me. msi 480 gaming x 4Gb hynix Vram Can up to ~31mhs but miner can't work long time and to use total 580W . 3 vga+main... . In the CPUZ is 120~130W I adjusted speed down to 29mhs and to use total 465W . CPUZ use 83W/Vga Your consumption is very high And had to go back to the previous driver Because of the error it crashes with code 52 because it is not signed: \
|
|
|
|
botros
Newbie
Offline
Activity: 31
Merit: 0
|
|
August 09, 2017, 02:01:23 AM |
|
hello Every Body
regards the under voltage thing .
the only working good solotuin for me was Claymore Batch file ""-cvddc" "-mvddc" they worked will with me
Now i got my hashrate like old days and the wattage is the same ,,
thank u all
|
|
|
|
Vwgtiturbo1
Newbie
Offline
Activity: 21
Merit: 0
|
|
August 09, 2017, 03:59:11 AM |
|
Has anyone tried this using Watt tool? Or is Afterburner the only overclock option available?
|
|
|
|
doktor83
|
|
August 09, 2017, 05:03:47 AM |
|
on some cards you can use the claymore parameters to control things, on others only trixx works, or maybe AB 4.4.0 B15 So to know which one works for you , you have to try out all of them.
|
|
|
|
|