Crate Mayne
Member
Offline
Activity: 95
Merit: 11
|
|
January 20, 2018, 07:33:31 AM |
|
Looks like newest version 1.6.7 mentions that it requires some mobo tweaks to properly use, so if you can find 1.6.6 for download that was the one I used. That comment about tweaks is equally applicable to any BIOS mod. When you change BIOS, its cryptography signature becomes invalid. If you have SecureBoot enabled in the MB settings, it will not boot because GPU firmware seems to be "compromised". CSM means Compatibility Support Mode for UEFI BIOS, it may be required to boot non-UEFI firmware (or firmware with wrong checksum/signature). So if it's required, it will be for any version of editor, or better said, for any modified video BIOS. Isn't that what running Pixel Patcher accomplishes though? I certainly don't claim to be a modding wiz, but in my months of bios tweaking and learning how to tweak... I've never seen the mobo tweaks be a step in tutorials. Just mod bios, flash bios, patch bios, restart computer, then done.
|
|
|
|
Crate Mayne
Member
Offline
Activity: 95
Merit: 11
|
|
January 20, 2018, 07:37:16 AM |
|
Dear Devs,
If you see this, any chance you could bless us with a quality of life UX improvement for the wallet by adding Payment IDs to the "Contacts" list. Doesn't really do any good to save our Stocks.Ex address if we still gotta copy/paste the Payment ID in every time.
|
|
|
|
denis-z12
|
|
January 20, 2018, 10:10:49 AM |
|
Looks like a very interesting project. Definitely bookmarking this to keep a eye on it for the future. All the best
|
|
|
|
lncm
Member
Offline
Activity: 388
Merit: 13
|
|
January 20, 2018, 10:54:11 AM |
|
|
|
|
|
osnwt
|
|
January 20, 2018, 11:18:32 AM |
|
Isn't that what running Pixel Patcher accomplishes though? I certainly don't claim to be a modding wiz, but in my months of bios tweaking and learning how to tweak... I've never seen the mobo tweaks be a step in tutorials. Just mod bios, flash bios, patch bios, restart computer, then done. Windows AMD drivers do not like patched VBIOS (of video cards), that can be fixed with atikmdag-patcher (that patches drivers). But UEFI motherboard may not boot system at all if it is in SecureBoot mode and VBIOS was patched. It also may not recognise videocards with patched BIOS if in UEFI mode, thus, may require CSM enabled. I have never seen such issues (but once I was not able to boot Linux USB flash until enabled BIOS CSM mode in the MB setup). But such issues may occur, so the README for BIOS editor on GitHub explains this. It does not mean that you definitly will have issues, it just means that tou might have them, and explains how to fix.
|
|
|
|
zhou2
|
|
January 20, 2018, 12:32:32 PM |
|
|
|
|
|
korm
Member
Offline
Activity: 280
Merit: 10
|
|
January 20, 2018, 02:27:19 PM |
|
A week ago i take MSI RX550 2Gb, upgraded bios and now I have 480H\s from 1 card with only 27-30W. 1 card here was about 100$ price, so its perfect choice for cryptonight right now.
How? I have a 5 60 4 Gb, 1190/200 clocks, modded bios with PBE 1.6 and I can only get ~380 H/s. who is the manufacturer of memory? and try sgminer 5.5.5-gm rawintensity/worksize 420/8 (448/2), gpu-threads 2 Micron. Couldn't get sgminer-gm to run, though. Coud you share bat file? I'm use this one for micron 777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715 I'm use this miner (nanopool_RX460560.conf Change the pool and wallet in this file. The second address is also changed to your own. start from this - NiceRX460560Platform0.bat) https://drive.google.com/open?id=1rusHXmmMBxb2zw63ZzkItrHDF7Iju_Sspass: 123 original post: https://goo.gl/HsMqDB
|
|
|
|
lncm
Member
Offline
Activity: 388
Merit: 13
|
|
January 20, 2018, 03:03:04 PM |
|
A week ago i take MSI RX550 2Gb, upgraded bios and now I have 480H\s from 1 card with only 27-30W. 1 card here was about 100$ price, so its perfect choice for cryptonight right now.
How? I have a 5 60 4 Gb, 1190/200 clocks, modded bios with PBE 1.6 and I can only get ~380 H/s. who is the manufacturer of memory? and try sgminer 5.5.5-gm rawintensity/worksize 420/8 (448/2), gpu-threads 2 Micron. Couldn't get sgminer-gm to run, though. Coud you share bat file? I'm use this one for micron 777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715 I'm use this miner (nanopool_RX460560.conf Change the pool and wallet in this file. The second address is also changed to your own. start from this - NiceRX460560Platform0.bat) https://drive.google.com/open?id=1rusHXmmMBxb2zw63ZzkItrHDF7Iju_Sspass: 123 original post: https://goo.gl/HsMqDBThat memory strap does give insane performance, but it crashes my 560 in a couple of minutes mining ethereum. From 380 to 470 H/s in cryptonight, damn! That was @ 2000 mhz memory. Shoud I run it slower but with those timings? Ps - it also crashes the system miming intense, rebooting now.
|
|
|
|
korm
Member
Offline
Activity: 280
Merit: 10
|
|
January 20, 2018, 03:09:21 PM |
|
That memory strap does give insane performance, but it crashes my 560 in a couple of minutes mining ethereum.
That was @ 2000 mhz memory. Shoud I run it slower but with thosr timings?
I'm use GPU1000/Mem1750 ETH give me 12.3, but i'm mine CryptoNote (410 Claymore, 440 sgminer)
|
|
|
|
lncm
Member
Offline
Activity: 388
Merit: 13
|
|
January 20, 2018, 03:15:37 PM |
|
That memory strap does give insane performance, but it crashes my 560 in a couple of minutes mining ethereum.
That was @ 2000 mhz memory. Shoud I run it slower but with thosr timings?
I'm use GPU1000/Mem1750 ETH give me 12.3, but i'm mine CryptoNote (410 Claymore, 440 sgminer) I see. Let me try @ 1850 and I'll report back. Ethereum performance is important to me also. With my previous bios I was getting 13.8 in ETH and 380 in Intense.
|
|
|
|
info_infoman
|
|
January 20, 2018, 03:18:58 PM |
|
Is there a vote on the kucoin exchange?Kucoin is one of the most popular exchanges recently. Some ico orders are listed there. ITNS is a very good project. I think ITNS can be contacted with kucoin official.
|
|
|
|
lncm
Member
Offline
Activity: 388
Merit: 13
|
|
January 20, 2018, 03:19:44 PM |
|
443 H/s @ 1875Mhz, let's see if it's stable.
|
|
|
|
lncm
Member
Offline
Activity: 388
Merit: 13
|
|
January 20, 2018, 03:23:02 PM |
|
@korn, do you have other memory straps for other cards / memory?
I have a 570 with Elpida, 570 Hynix, 580 Hynix and 480 hynix.
|
|
|
|
rascabily
|
|
January 20, 2018, 03:25:16 PM |
|
Is there a vote on the kucoin exchange?Kucoin is one of the most popular exchanges recently. Some ico orders are listed there. ITNS is a very good project. I think ITNS can be contacted with kucoin official. if ITNS gets into kucoin, we'll see it in 1 $
|
|
|
|
yeyz20171031
|
|
January 20, 2018, 03:29:13 PM |
|
Looks like a very interesting project. Definitely bookmarking this to keep a eye on it for the future. All the best
The government of a country is said to have to raise the wall, and the demand for distributed VPN becomes stronger, and intensecoin will have a big development in 2018!
|
|
|
|
korm
Member
Offline
Activity: 280
Merit: 10
|
|
January 20, 2018, 03:32:21 PM |
|
@korn, do you have other memory straps for other cards / memory?
I have a 570 with Elpida, 570 Hynix, 580 Hynix and 480 hynix.
With my card, I tried all timings for all manufacturers. From this topic https://goo.gl/1ud8gKThese were the best. Micron worked best with them. Although these timings was for the Elpida Look at the topic, there in russian, but this should not be problem
|
|
|
|
kingofrogues07
Member
Offline
Activity: 140
Merit: 13
|
|
January 20, 2018, 03:42:05 PM |
|
Hi guys is there any news or clue for new exchange market? IS there any work for decentralized exchange platforms such as https://www.altcoin.io/ or etc.?
|
|
|
|
proride
|
|
January 20, 2018, 04:28:20 PM |
|
Hi guys is there any news or clue for new exchange market? IS there any work for decentralized exchange platforms such as https://www.altcoin.io/ or etc.? No new exch before normal hardfork appliment, I think.
|
|
|
|
Renegade1979
|
|
January 20, 2018, 05:11:38 PM |
|
I have a 570 with Elpida, 570 Hynix, 580 Hynix and 480 hynix. damn algo is for AMD... I have Samsung memory and can OC it to 9400 MHz at my GTX1060 but it would give just 570 H/s though a bit of revenge comes at Neoscrypt
|
|
|
|
lncm
Member
Offline
Activity: 388
Merit: 13
|
|
January 20, 2018, 05:14:54 PM |
|
@korn, do you have other memory straps for other cards / memory?
I have a 570 with Elpida, 570 Hynix, 580 Hynix and 480 hynix.
With my card, I tried all timings for all manufacturers. From this topic https://goo.gl/1ud8gKThese were the best. Micron worked best with them. Although these timings was for the Elpida Look at the topic, there in russian, but this should not be problem OK, I tried some straps on 570 and loss a bit of performance, and 580 8 Gb was not stable. Meanwhile, 560 @ 1875 mem seems stable with intense, I'm trying Ethereum mining now, a bit of performance increase, almost 14 MH/s. Let's see if it's stable, performances increases are always welcome.
|
|
|
|
|