Trongersoll
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 01:45:00 AM |
|
i heard that the units were Meters.
|
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 06:42:02 AM |
|
Thanks a lot 'orama! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
dan99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 06:49:44 AM |
|
with competitors troll making their rounds including those Asic wannabe or so call asic experts criticizing and expressing their own opinions etc.. If you are that good why don't you design your own Asic or attend Kncminer open day and you can shoot your questions to Sam or Marcus ... If those Avalon kids would have started today I am sure you will also be making your negative rounds don't believing they will produce the Asics, won't you? But hey, those college kids make it.
|
|
|
|
Bitcoinorama (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 11:20:25 AM |
|
|
Make my day! Say thanks if you found me helpful ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp
|
|
|
idee2013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 11:35:17 AM |
|
From report: The Saturn and Jupiter Chips unsurprisingly Marcus is not happy with. The final design has been tested and again any risk to stability of the chip minimised. It has to work from the outset, a revision of the mask would cost an additional three months lead. Suffice to say Marcus could do so much more to it and intends to. There will be further revisions to the chip in future as he has a lot left to play with in a 28nm ASIC. This is no where near the most complicated ASIC chip he has designed. From KNC homepage An additional gain of 30% more hashing when the advanced algorithms provided by ORSoC are applied. Does that mean, that the first miners will not get the 30% additional gain? Does that sentence say, that only futher versions will get the 30% ? Or is it for example with a firmware upgrade for the first shipped possible, too? ( are the 30% only possible in the asic chip design?)
|
|
|
|
Bitcoinorama (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 11:39:38 AM |
|
From report: The Saturn and Jupiter Chips unsurprisingly Marcus is not happy with. The final design has been tested and again any risk to stability of the chip minimised. It has to work from the outset, a revision of the mask would cost an additional three months lead. Suffice to say Marcus could do so much more to it and intends to. There will be further revisions to the chip in future as he has a lot left to play with in a 28nm ASIC. This is no where near the most complicated ASIC chip he has designed. From KNC homepage An additional gain of 30% more hashing when the advanced algorithms provided by ORSoC are applied. Does that mean, that the first miners will not get the 30% additional gain? Does that sentence say, that only futher versions will get the 30% ? Or is it for example with a firmware upgrade for the first shipped possible, too? ( are the 30% only possible in the asic chip design?) That will be answered in the next bit; Retro 72's Q&A, which I'm now soo happy I decided to pry further into detail. Cannot wait to start/stop every fifteen seconds transcribing. Joy!
|
Make my day! Say thanks if you found me helpful ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp
|
|
|
idee2013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 11:41:28 AM |
|
ah...ok.....did not know that it will be answered in the Q&A ..sorry
|
|
|
|
erschiessen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 11:48:10 AM |
|
idee,
I take it to mean firmware, but since bitcoinorama can answer that with conversations with KnC, we shall all know. (my bet is that KnC intentionally lowered the specs to ensure their product is solid)
|
Your Message Here 12KHW3i2Hamk1irY8b181N4vMXUnVYL1ah
|
|
|
Bitcoinorama (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 12:12:42 PM |
|
idee,
I take it to mean firmware, but since bitcoinorama can answer that with conversations with KnC, we shall all know. (my bet is that KnC intentionally lowered the specs to ensure their product is solid)
Not that they will admit that, but I think you've nailed it there Ers. Over delivery is a lot easier, if you concentrate on under-promising in the first place! ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
Make my day! Say thanks if you found me helpful ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp
|
|
|
johnyj
Legendary
Offline
Activity: 1988
Merit: 1012
Beyond Imagination
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 01:04:27 PM |
|
Optimization means higher gate density, but then you have higher power supply and cooling requirement, components easier to fail. I would prefer many low temp low power devices instead of a single high power high temp device
BFL's 65 nm chip is 4GH per chip, kncminer claim a 23nm chip with 7.3GH per chip, double the efficiency, reasonable and still quite high energy density
|
|
|
|
retro72
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 01:11:43 PM |
|
Thanks for the transcript. Very informative. Looking forward to reading the rest.
|
|
|
|
erschiessen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 02:12:42 PM |
|
Optimization means higher gate density, but then you have higher power supply and cooling requirement, components easier to fail. I would prefer many low temp low power devices instead of a single high power high temp device
BFL's 65 nm chip is 4GH per chip, kncminer claim a 23nm chip with 7.3GH per chip, double the efficiency, reasonable and still quite high energy density
Been a long time since I worked in ICs, but if their chip size is quite large, as reported to be, it could mean that the size of the internal conductors are larger, hence a lowering of I 2R losses. Yes? No?
|
Your Message Here 12KHW3i2Hamk1irY8b181N4vMXUnVYL1ah
|
|
|
mo_mo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 02:22:28 PM |
|
thank you OP, I wish I could go to the open house. Great article hope to see more progress and updates from KNC
|
|
|
|
ChipGeek
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2013, 03:18:59 PM |
|
Marcus: The die size will be...very large.
That sounds like trouble waiting to happen. I agree. This plus the lack of chip testing before mounting to the boards are the two things that concern me the most. Here's why: yield. There are two primary sources of yield loss (bad chips). 1) Process problems. Ex: Too much etching of metal (opens), not enough etching of metal (shorts), and similar issues with other layers (transistors and layer interconnects). These are usually noticed and/or fixed by the fab because they add test structures in between the chips in the scribe lanes and/or in unused areas of the chips. During each step of the wafer production, they test these test structures to make sure that that particular step was done right. If done wrong, the wafers are scrapped or sometimes the error can be corrected. However, there can be a uniformity issue where the die on one part of the wafer are good, while all the die in another area are bad. 2) Random defects - figuratively (sometimes literally) "specks of dust" on the wafers. Think of these this way. Imagine putting a piece of graph paper on the wall (representing the wafer and the small squares are the individual die) and throwing darts at it randomly. Lets say you throw 50 darts and the hole left by each dart represents a random defect. If the graph paper has small squares (1000 per sheet of paper), then you have 50 bad die, 950 good die for 95% yield of good die. Now imagine the squares (die) are 10x bigger so there are only 100 die per wafer. Now 50 defects gives 50 bad die and 50 good ones for 50% yield. Thus, larger die size impacts yield negatively. Realize the numbers here were chosen for simplicity but the effect is VERY real. Small die --> high yields --> no chip testing --> probably good. Large die --> low yields --> no chip testing --> not a good idea in my opinion. ORSoC is relying on the concept of using a large number of cores per chip and turning off the bad ones. The idea is that you can turn a bad die back into a good one. This is generally an acceptable strategy and one that BFL is successfully using. Depending on ORSoc's actual die size, the process yields, and the specific method of disabling cores, they might pull it off. However as someone else mentioned in this thread, there are sometimes chips that are COMPLETELY dead - just a shorted blob of metal and completely worthless unless you want something to blow up power supplies. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Those really should be screened out at a minimum. And if you're doing that, you might as well do a full chip test with binning. Note: I'm not condemning the strategy that ORSoc is using. It might work. I would be a whole lot more comfortable if they were doing chip testing. Disclaimer: I am a BFL customer. I have not ordered any KnC product yet but I am seriously considering it. If I had the cash on hand I might have already ordered. Perhaps BTC I mine with my BFL hardware will go to KnC.
|
Tip jar: 1ChipGeeK7PDxaAWG4VgsTi31SfJ6peKHw
|
|
|
daggeteo
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2013, 12:31:16 AM |
|
Good work thus far, bitcoinorama
OTHER ATTENDEES:
Please feel free to chime in, more voices are needed in the choir!
I've been quiet thus far because the accounts that are given by Bitcoinorama (aswell as keyzersoze, who also attended) are accurate. Bitcoinorama was very thorough with his questions and has been very thorough with the report of said questions. For me nothing changed with the Monday open day! /D
|
|
|
|
mandelmus
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2013, 06:34:53 AM |
|
I thought I'd go ahead and load up on some Jupiters ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) but the site says there's only 1652 left. Anyone know how many have sold so far? Genesis block said they already pre-sold 890 orders a few days ago -- at over 160 TH/s. If they can deliver on all those orders, will that much processing power have any affect on the value of Bitcoins, or just on the mining profitability? http://i43.tinypic.com/2qnmqs5.jpg
|
|
|
|
KS
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2013, 10:06:35 AM Last edit: June 15, 2013, 10:23:09 AM by KS |
|
I thought I'd go ahead and load up on some Jupiters ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) but the site says there's only 1652 left. Anyone know how many have sold so far? Genesis block said they already pre-sold 890 orders a few days ago -- at over 160 TH/s. If they can deliver on all those orders, will that much processing power have any affect on the value of Bitcoins, or just on the mining profitability? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi43.tinypic.com%2F2qnmqs5.jpg&t=665&c=lg5AuRci7WX3RQ) They fixed it, I ordered more than 10.000 Saturns and 4.000 Jupiters. But then my CC was rejected :pI actually put more than a million in the shopping cart (then got bored when it didn't stop), no limit there. However, after logging in and opening the shopping cart, it showed max 1652 Jupiters and 1864 Saturns were available. My crystall ball says they only put 2000 or 2500 in "stock". So that's 122T in Jupiters (348 sold) and 24T in Saturns (136 sold) with stock = 2000 and 297T in Jupiters (848 sold) and 111T in Saturns (636 sold) with stock= 2500. My take is on 2000 as the "natural" mix between high end and low end products would be closer to the 348/136 distribution than the 848/636 one. But this is total speculation (I guess we can expect a lot of the wire transfer orders were fake).
|
|
|
|
Rampion
Legendary
Offline
Activity: 1148
Merit: 1018
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2013, 10:15:52 AM |
|
Why is everybody so happy that they can produce and deliver so many units per day?
Don't you realize this is a race, and the best way to maximize ROI for customers is to sell batches, as Avalon did?
Just think: if KnC sells 1,500 Jupiters and delivers them quickly, when added to the rest of the network each one will probably produce aprox. 1BTC or less per day, and ROI will be unlikely. If they sell +3,000 Jupiters (which seems likely they will do), when they arrive each Jupiter will produce 0,5BTC per day or less, and ROI won't never happen.
Honestly, it's pretty scary to see them pushing out those numbers. Each additional Jupiter they sell removes value from the previous one. Kinda the same problem we thought BFL would have, but the reality ended up being that they are so slow delivering that actually their very first customers may break/even with their units despite the delays.
|
|
|
|
Bagpipe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2013, 10:33:31 AM |
|
Marcus: We have done designs that are much more complex. One with 187 clock domains, that's the...that's the most tough design. I...hope that we will never see such a design again, so yes we have done more complex designs.
Me: What Was that?
Marcus: That was a hardcopy. 40Nm hardcopy.
Me: But what was that for?
Marcus: Ah that's a confidential large customer.
Is there any way I could ask them confidentially a question about that design? I know one that might just match that description of a previous -- likely a 65nm design -- that would benefit of being shrunk to 40nm. If it is really so, it would drastically change my view on the whole OrSoc, and I would have to say that they are grossly under-appreciated. I meant, you have a good relationship with them and this question really burns my mind. And PLEASE, it is 40 nm as in nano-metres, not Newton-metres, oh my!!!!
|
|
|
|
idee2013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2013, 10:36:00 AM |
|
Why is everybody so happy that they can produce and deliver so many units per day?
Don't you realize this is a race, and the best way to maximize ROI for customers is to sell batches, as Avalon did?
Just think: if KnC sells 1,500 Jupiters and delivers them quickly, when added to the rest of the network each one will probably produce aprox. 1BTC or less per day, and ROI will be unlikely. If they sell +3,000 Jupiters (which seems likely they will do), when they arrive each Jupiter will produce 0,5BTC per day or less, and ROI won't never happen.
Honestly, it's pretty scary to see them pushing out those numbers. Each additional Jupiter they sell removes value from the previous one. Kinda the same problem we thought BFL would have, but the reality ended up being that they are so slow delivering that actually their very first customers may break/even with their units despite the delays.
and what is avalon doing?....they sale millions of avalon chips....it is the same thing BFL sells chips, too. But only 100,000 https://products.butterflylabs.com/65nm-asic-bitcoin-mining-chip.html
|
|
|
|
|