mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA...

[tale01]

Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version

Thank you.

Hello!

This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now?

Usually, you have to wait about 5 minutes to get accurate speed measurements.

Thanks

I wait around 50 min, speed is not up  (environment and config is the same old version)
My card is R9 Fury Nano

see picture
https://imgur.com/a/o4qjW

[Bwtmn7]

well i tried the miner and the R9 Fury only shows 38MHs and the other R9 Fury Didnt load for some reason

[winmkx]

Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version

Thank you.

Hello!

This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now?

Usually, you have to wait about 5 minutes to get accurate speed measurements.

Thanks

I wait around 50 min, speed is not up  (environment and config is the same old version)
My card is R9 Fury Nano

see picture
https://imgur.com/a/o4qjW

Please provide your command line (avoid putting your login and password!). Do you have the --asm in command line?
Intensity should be 23 for best results. You may need to increase Windows swap size to 30GB or otherwise the miner will not start (Windows drivers limitation).

[winmkx]

well i tried the miner and the R9 Fury only shows 38MHs and the other R9 Fury Didnt load for some reason

try running "best.cmd" (included in mkxminer200). Do you still have 38MHs?

[tale01]

Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version

Thank you.

Hello!

This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now?

Usually, you have to wait about 5 minutes to get accurate speed measurements.

Thanks

I wait around 50 min, speed is not up  (environment and config is the same old version)
My card is R9 Fury Nano

see picture
https://imgur.com/a/o4qjW

Please provide your command line (avoid putting your login and password!). Do you have the --asm in command line?
Intensity should be 23 for best results. You may need to increase Windows swap size to 30GB or otherwise the miner will not start (Windows drivers limitation).

Fist time I use --asm and now I try test with out --asm is getting the same speed!!
It different from old version, when use --asm get speed up.

Command
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

mkxminer.exe -d 0,2,3,4,5 --exitsick --asm  -o stratum+tls://stak.suprnova.cc:7710 -u login.worker -p x -I 23


Windows swap is virtual memory ? I set to 45GB

[winmkx]

Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version

Thank you.

Hello!

This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now?

Usually, you have to wait about 5 minutes to get accurate speed measurements.

Thanks

I wait around 50 min, speed is not up  (environment and config is the same old version)
My card is R9 Fury Nano

see picture
https://imgur.com/a/o4qjW

Please provide your command line (avoid putting your login and password!). Do you have the --asm in command line?
Intensity should be 23 for best results. You may need to increase Windows swap size to 30GB or otherwise the miner will not start (Windows drivers limitation).

Fist time I use --asm and now I try test with out --asm is getting the same speed!!
It different from old version, when use --asm get speed up.

Command
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

mkxminer.exe -d 0,2,3,4,5 --exitsick --asm  -o stratum+tls://stak.suprnova.cc:7710 -u login.worker -p x -I 23


Windows swap is virtual memory ? I set to 45GB

You are correct. I was able to replicate the problem. Please give me one hour to upload new version.

Thanks for finding this!

[tale01]

Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version

Thank you.

Hello!

This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now?

Usually, you have to wait about 5 minutes to get accurate speed measurements.

Thanks

I wait around 50 min, speed is not up  (environment and config is the same old version)
My card is R9 Fury Nano

see picture
https://imgur.com/a/o4qjW

Please provide your command line (avoid putting your login and password!). Do you have the --asm in command line?
Intensity should be 23 for best results. You may need to increase Windows swap size to 30GB or otherwise the miner will not start (Windows drivers limitation).

Fist time I use --asm and now I try test with out --asm is getting the same speed!!
It different from old version, when use --asm get speed up.

Command
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

mkxminer.exe -d 0,2,3,4,5 --exitsick --asm  -o stratum+tls://stak.suprnova.cc:7710 -u login.worker -p x -I 23


Windows swap is virtual memory ? I set to 45GB

You are correct. I was able to replicate the problem. Please give me one hour to upload new version.

Thanks for finding this!

Wow, Thanks for fast solve.
i'm wait...

[winmkx]

Miners who have Fury X, Fury Nano, ProDuo. Please re-download mkxminer200. Links in OP.

Thank you, tale01, for reporting the issue.

[tale01]

Miners who have Fury X, Fury Nano, ProDuo. Please re-download mkxminer200. Links in OP.

Thank you, tale01, for reporting the issue.

Thank you so much , speed is OK.

hope you develop for another pool such as "miningpoolhub", etc.

 

[yoshcat]

Can you post the previous version, where there is support nicehash?

[daboehla]

If the miner would be p2pool compatible I would use it 

[lae]

=== Download link
Version 2.0 Windows
MD5: 897aca61dfc6fd15b8c5adff8b90c1c7

Linux version will be added later if there is community interest.

I need a Linux version, considering I haven't used WIndows as my primary OS since 2006.

[oddity2505]

Very nice, I get ~32 MHs/s using my RX 570, stock clocks. However to keep the gpu frequency stable I have to increase the powerlimit by 25%. This algo is power consuming, especially compared to cryptonight.

[splat1]

Can someone point me to a TLS enabled vertcoin pool?  All my usual suspects are stratum+tcp only.

[Jokarz]

Version 1.0.0 nicehash for Windows uploaded. You can now test it. Thanks!

How do I use it with Nicehash?

[Bwtmn7]

well i tried the miner and the R9 Fury only shows 38MHs and the other R9 Fury Didnt load for some reason

try running "best.cmd" (included in mkxminer200). Do you still have 38MHs?

that is the speed from mining with that bat file,also only a single card is mining,not sure why

[pantez]

Im only get 29.5Mhs with my RX 580 . ( My card had modded).

[PallMall]

mkxminer.exe - Aplication Error

The application was unable to start correctly (0xc000007b)

and on second rig

[04:17:03 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[04:17:04 - 0 days 00:00:01] Could not find any GPUs, exitting...

Both rigs are 6 x fury

[Bwtmn7]

can you add the poor 2995 for mona on suprnova which is variable difficulty?

https://mona.suprnova.cc/

also my miner crash my pc when loading 2 undervolted R9 FURY at stock clocks. intensity  23

[PFFyodor]

[19:34:26 - 0 days 00:00:00] Connecting to stratum+tls://mona.suprnova.cc:3001 as xxx.xx...
[19:34:29 - 0 days 00:00:03] Pool connection error.
[19:34:29 - 0 days 00:00:03] Pool connection error.