[GLC] Globalcoin | 4 Year Anniversary 1.5.4! | NO IPO, NO PREMINE | [SCRYPT]

[micax1]

I've had no issues at all with solo mining for the past 48 hours. Blocks are being accepted and confirmed by the network.



If you can't sync your wallet, exit it and add my dedicated node to your globalcoin.conf file then start your wallet again.

addnode=162.243.239.107

The network is running fine and currently at 358,843 Kh/s

Edit: Yes it does seem that japool and miners-pool.eu are having issues, most likely with server load.

Update: From Miners-Pool.eu - Pool is down. We expect the new server. Meanwhile this pool is stopped. Keep in touch, the new servers are ordered since 2 days, We hope to be delivered in next days.

what is your getinfo ? if you don`t have problems and others have - maybe fork?

[lulutis2000]

Could you explain me how to configure solo minning?

I configure it but i only see this:



What is the problem?

[MinerMike]

Could you explain me how to configure solo minning?

I configure it but i only see this:



What is the problem?

There is no problem you are solo mining. Unlike pool mining you will only see accepted shares when you find a block.

[lulutis2000]

Thank you so much, and in your opinion with my khas average how time i have to wait for a block?

[nosf009]

I can't seem to get the solo mining started :/
How did you do it guys?

Can you explain to me in short what I need to do?

Here's my part so far:
I just got my first rig today;
would love to mine this. Can you two above perhaps help me for a second?

I've started the QT and then it synced.
Then I closed it and created a globalcoin.conf in right place with this:

rpcuser=***
rpcpassword=***
rpcallowip=localhost
rpcport=55788
port=55789
daemon=1
server=1
gen=0
maxconnections=100
addnode=162.243.239.107
addnode=54.212.51.236
addnode=70.79.24.157
addnode=87.28.147.172
addnode=213.205.229.82
addnode=121.215.159.167
addnode=113.162.171.60
addnode=62.163.9.155
addnode=192.241.161.229
addnode=71.63.127.88
addnode=88.68.62.215
addnode=77.57.66.129
addnode=121.215.156.245
addnode=54.252.196.5
addnode=199.38.85.200
addnode=2.136.230.104
addnode=193.189.187.250
addnode=217.170.122.19

Configured miner for localhost:55789 with given u/p and cannot even connect.
I'm trying out guiminer now before I get it to work, and then I plan to use cg miner, but the here's the line anyway:

2013-12-13 01:20:26: Running command: "C:\Users\***\Desktop\guiminer\cgminer\cgminer.exe" --scrypt -u ***-p *** -o stratum+tcp://localhost:55789 --gpu-platform 0 -d 0 -w 256 -v 1 -I 13 -g 1 -l 1 -T  --thread-concurrency 6720
2013-12-13 01:20:26: Listener for "Default" started
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:20:26] Started cgminer 3.1.0
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:20:26] Probing for an alive pool
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:21:26] No servers were found that could be used to get work from.
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:21:26] Please check the details from the list below of the servers you have input
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:21:26] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:21:26] Pool: 0  URL: stratum+tcp://localhost:55789  User: *** Password: ***
2013-12-13 01:21:26: Listener for "Default": [2013-12-13 01:21:26] No servers could be used! Exiting.

I can't get it to work for a while now. Am I doing something wrong?
Thanks a bunch in advance; I seem to be lost here a bit. This was supposed to work, no?

[MinerMike]

I can't seem to get the solo mining started :/
How did you do it guys?

Can you explain to me in short what I need to do?

...

Configured miner for localhost:55789 with given u/p and cannot even connect.

You have the wrong port, you need 55788 and replace stratum+tcp with http

Code:

cgminer.exe" --scrypt -u ***-p *** -o http://localhost:55788 --gpu-platform 0 -d 0 -w 256 -v 1 -I 13 -g 1 -l 1 -T  --thread-concurrency 6720

[lulutis2000]

Now appear 91000Hashes accepted, but i don't see more coins in my wallet, is it ok?

Could you help me MinerMake?

When you find a block, when do you receive the coins?I have the wallet open but i dont see new transactions.

[MinerMike]

Now appear 91000Hashes accepted, but i don't see more coins in my wallet, is it ok?

Could you help me MinerMake?

When you find a block, when do you receive the coins?I have the wallet open but i dont see new transactions.

Post another screenshot of your cgminer. Coins should show in your wallet within a minute of being accepted.

[lulutis2000]

here u have it:



Thank u so much again.

More info:
Deleted!

[MinerMike]

Looks to be an accepted block, is anything showing within the transactions tab of your wallet?

Edit: Make sure to change your rpcuser and password after posting it here.

[lulutis2000]

No, only previous transactions from a pool.



I deleted the image with my rpc info, thanks!

[nosf009]

I can't seem to get the solo mining started :/
How did you do it guys?

Can you explain to me in short what I need to do?

...

Configured miner for localhost:55789 with given u/p and cannot even connect.

You have the wrong port, you need 55788 and replace stratum+tcp with http

Code:

cgminer.exe" --scrypt -u ***-p *** -o http://localhost:55788 --gpu-platform 0 -d 0 -w 256 -v 1 -I 13 -g 1 -l 1 -T  --thread-concurrency 6720

Oh YEAH! Freaking HTTP THANKS!

[lulutis2000]

I still waiting the coins, i dont like that, How can i do minermike?

[MinerMike]

Ok perhaps try a rescan with your wallet, this will rescan the blockchain for missing transactions. You'll need to stop the miner and exit your wallet.

Now we'll restart the wallet forcing a rescan, open up cmd and type:

Code:

cd path-to-your-globalcoin-qt.exe-folder-here
globalcoin-qt -rescan

Your globalcoin-qt directory looked to be: %appdata%/globalcoin from your screenshot. You can close the cmd window after running the above.

Your wallet will take a little while to rescan the blocks, you'll see the globalcoin icon in your taskbar and it will open the main wallet window when it's ready.

Now check for your mined block in transactions, if it's not there then perhaps it was orphaned

[lulutis2000]

Ok, i gonna wait to find another block, if i dont receive the coins agains i will do that.

Thanks a lot! I will give you news.

[lulutis2000]

I found other block but no coins in my wallet :-(

[roundrobin]

Also doing some solo mining attempts from my own local pool. It appears the miner is doing proper work, but I keep getting network difficulty 1. What is wrong, or is this nothing to worry about?

[MinerMike]

I would suggest exiting your wallet then removing all nodes within your globalcoin.conf file and using the following:

Code:

rpcuser=USER
rpcpassword=PASSWORD
rpcallowip=localhost
rpcport=55788
port=55789
daemon=1
server=1
gen=0
maxconnections=100
addnode=162.243.239.107
addnode=162.243.106.159
addnode=162.243.104.134

Perhaps also delete your peers.dat file from %appdata%/globalcoin

These nodes are my own dedicated servers running the latest globalcoind with over 100 peers connected currently.

[MinerMike]

The network has reached 578,166.262 Kh/s

I'm setting up a few more nodes now.

[lulutis2000]

I did what you said to me Mike but i don't see news transactions.

Maybe two blocks orphaned??I dont think so. Maybe a problem of set up?