[ANN] US/North American Bitfury sales NEW STOCK ***NOW SHIPPING***

[dani]

each cards draws 40 Watt, 16 cards add up to 640 Watt, that was correct. Also didnt punin mention that they "missed" their goal of 40Watt by 25%? so 0.75*640 = ~480Watt 

[Morblias]

On the EU thread punin posted pics of v2.2 master board that is powered with 2 PCI-E connectors. I am assuming these are the same ones Dave will be using.

[minternj]

Morblias, read dave's response above. Looks like he wont be able to turn around the 2.2 boards for august.

[Morblias]

Morblias, read dave's response above. Looks like he wont be able to turn around the 2.2 boards for august.

Oh, darn! I took forever to post that last one since I got distracted by work and didn't read the latest responses haha.

[tom99]

each cards draws 40 Watt, 16 cards add up to 640 Watt, that was correct. Also didnt punin mention that they "missed" their goal of 40Watt by 25%? so 0.75*640 = ~480Watt  

   read post 973 for watt use  link https://bitcointalk.org/index.php?topic=251966.960

[dani]

Thanks, didn't see this. This is even better than expected 

[buzzdave]

each cards draws 40 Watt, 16 cards add up to 640 Watt, that was correct. Also didnt punin mention that they "missed" their goal of 40Watt by 25%? so 0.75*640 = ~480Watt  

   read post 973 for watt use  link https://bitcointalk.org/index.php?topic=251966.960

Thanks tom99.

So two PCI-e 8pin cables soldered together should be enough, with 10 gauge wire from the combiner to the board (ver 1).

I'm trying to move both efforts forward - producing the new v2.2 M-board that has the PCI-type connectors, as well as producing cable adapters to allow the V1 M-board to connect to your PSU.  You shouldn't have to make anything on your own.

The adapter cable will use two of your PCI-e cables from your PSU.  Each PCI-e has (3) 12V and (3)GND wires crimped into a ring terminal connector: http://imgur.com/a/CoAO4 (quick prototype made by Cablez)

[arorts]

What PSU model would you recommend?

It would depend how many H-boards are in use. A starter kit would work fine with a 350W supply, even a 200W supply likely. A full 400GHash rig would need at least 500W (assuming that bitfury is operating near the 1w/GHash design), but a 750W supply would be best

That's not true in regards to the 400 Gh rig power requirements. Please read post #973 https://bitcointalk.org/index.php?topic=251966.960

[spiccioli]

What PSU model would you recommend?

It would depend how many H-boards are in use. A starter kit would work fine with a 350W supply, even a 200W supply likely. A full 400GHash rig would need at least 500W (assuming that bitfury is operating near the 1w/GHash design), but a 750W supply would be best

That's not true in regards to the 400 Gh rig power requirements. Please read post #973 https://bitcointalk.org/index.php?topic=251966.960

arorts,

you can point directly to post #973 copying the link with post number on post header (right click on it and then copy).

https://bitcointalk.org/index.php?topic=251966.msg2887512#msg2887512



spiccioli

[CoinHoarder]

I hate to be the elephant in the room, but any word on August shipments?

I know you guys said late August, but that is approaching quite soon.

[Isokivi]

I hate to be the elephant in the room, but any word on August shipments?

I know you guys said late August, but that is approaching quite soon.

As you can see, we've hit a setback unfortunately. Luckily we identified this in time (before all chips were soldered to non-working boards). It'll take ~2 days to produce the boards, but up to 5 days to ship them to europe, so I might be going to China to test them on location to save time. We might find someone locally to do this also, but if I go there I'll be able to take some pics for you. I sincerely apologize for this delay. We're working hard to keep the delay to minimum.

Update

I've added option for UPS Express Saver shipping, and dropped the prices a bit as further october orders will most likely ship in very late october. Those who picked first october orders are likely to receive theirs in very early october, if not september.

Regarding invoices: there was a problem on the site. I will need to send invoices manually. You will get an invoice, don't worry.

I need to sleep now. Shanghai awaits tomorrow. I should have more news for you in about 30 hours.

Thats the latest.

[CoinHoarder]

Thanks. 

[Unacceptable]

What PSU model would you recommend?

It would depend how many H-boards are in use. A starter kit would work fine with a 350W supply, even a 200W supply likely. A full 400GHash rig would need at least 500W (assuming that bitfury is operating near the 1w/GHash design), but a 750W supply would be best

That's not true in regards to the 400 Gh rig power requirements. Please read post #973 https://bitcointalk.org/index.php?topic=251966.960

arorts,

you can point directly to post #973 copying the link with post number on post header (right click on it and then copy).

https://bitcointalk.org/index.php?topic=251966.msg2887512#msg2887512



spiccioli

Learn something everyday 

[klondike_bar]

I hate to be the elephant in the room, but any word on August shipments?

I know you guys said late August, but that is approaching quite soon.

As you can see, we've hit a setback unfortunately. Luckily we identified this in time (before all chips were soldered to non-working boards). It'll take ~2 days to produce the boards, but up to 5 days to ship them to europe, so I might be going to China to test them on location to save time. We might find someone locally to do this also, but if I go there I'll be able to take some pics for you. I sincerely apologize for this delay. We're working hard to keep the delay to minimum.

Update

I've added option for UPS Express Saver shipping, and dropped the prices a bit as further october orders will most likely ship in very late october. Those who picked first october orders are likely to receive theirs in very early october, if not september.

Regarding invoices: there was a problem on the site. I will need to send invoices manually. You will get an invoice, don't worry.

I need to sleep now. Shanghai awaits tomorrow. I should have more news for you in about 30 hours.

Thats the latest.

roughly 10 hours ago, punin mentioned that he may be out-of-contact while in china, but come back with news in 30hrs (so about 20hrs from now). I anticipate that the new H-boards must be in transit by now, since everything appears to be coming to a head this week and (ideally) shipping next week

[buzzdave]

Maciej and Tytus teamed up last night and fully checked out the latest H-boards.  They work fine, so production resumes!

We are asking (demanding actually) daily, expedited shipping of whatever gets produced.  Last time they "overnighted" something to Tytus it took 5 days for him to receive it.  They can make about 500 boards a day. 

So I expect to start shipping them next week - it will be right up against the end of the month.  I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!

Getting really excited now - I've waited a long time for this! (single tear)

[greaterninja]

Maciej and Tytus teamed up last night and fully checked out the latest H-boards.  They work fine, so production resumes!

We are asking (demanding actually) daily, expedited shipping of whatever gets produced.  Last time they "overnighted" something to Tytus it took 5 days for him to receive it.  They can make about 500 boards a day. 

So I expect to start shipping them next week - it will be right up against the end of the month.  I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!

Getting really excited now - I've waited a long time for this! (single tear)

Sounds good.  Thank you Dave, Tytus and Maciej.

[Foofighter]

Maciej and Tytus teamed up last night and fully checked out the latest H-boards.  They work fine, so production resumes!

We are asking (demanding actually) daily, expedited shipping of whatever gets produced.  Last time they "overnighted" something to Tytus it took 5 days for him to receive it.  They can make about 500 boards a day. 

So I expect to start shipping them next week - it will be right up against the end of the month.  I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!

Getting really excited now - I've waited a long time for this! (single tear)

thanks for you efforts!

great news

[americandesi]

Maciej and Tytus teamed up last night and fully checked out the latest H-boards.  They work fine, so production resumes!

We are asking (demanding actually) daily, expedited shipping of whatever gets produced.  Last time they "overnighted" something to Tytus it took 5 days for him to receive it.  They can make about 500 boards a day. 

So I expect to start shipping them next week - it will be right up against the end of the month.  I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!

Getting really excited now - I've waited a long time for this! (single tear)

This is so f****ing awesome.. Thanks dave. After a longtime, seeing a ASIC manufacturer sticking to the deadline. I don't have anything else except respect for bitfury and you.

I need to get ready to receive them.

P.S : How about the shipping prices.? Are they updated on the site yet.?

[rsbriggs]

Boards not going from China to Tytus and then back to you, yes?

[CoinHoarder]

I hope other ASIC companies are taking notes.

Thanks Dave for keeping us up to date!