VEGA 64 mining FREE WISDOM

[PanzerSheriff]

best token I ever bought is the 300 (no whitepaper, roadmap, no functionality, no bullshit scam promises, just collectible)
unwavering support even with all cryptos retreating at this time
I am steadily increasing my position until I own 1% of total supply that's 3 tokens as there are and can ever be 300 tokens issued of which Dev team is still hodling 90 of them thus 210 remain in the open market making it impossible to manipulate like shittle sorry ripple and bitcoin

quick math
7.5 billion people in the world 210 tokens available
can you say super collectable?

As a fellow salty Norwegian, I need to ask you if you are joking or if you are sarcastic or something.... As of right now, I choose to believe it is way too cold and you are keeping warm in the sauna with some vodka and are a little drunk.

If you are sober please look for another source of investment advice that your baby brother....

[treanski]

no sata connection is very bad for powerring risers, it will work some time, but you will probably burn your cables/hardware after some time.

It's only true if you run Vega at 300Watt. With normal 150W consumption 2*8Pin is more than enough and riser power won't be used much.

bullshit again, im talking about powering risers not about powering gpus

[STT]

best token I ever bought is the 300 (no whitepaper, roadmap, no functionality, no bullshit scam promises, just collectible)
unwavering support even with all cryptos retreating at this time
I am steadily increasing my position until I own 1% of total supply that's 3 tokens as there are and can ever be 300 tokens issued of which Dev team is still hodling 90 of them thus 210 remain in the open market making it impossible to manipulate like shittle sorry ripple and bitcoin

quick math
7.5 billion people in the world 210 tokens available
can you say super collectable?

As a fellow salty Norwegian, I need to ask you if you are joking or if you are sarcastic or something.... As of right now, I choose to believe it is way too cold and you are keeping warm in the sauna with some vodka and are a little drunk.

If you are sober please look for another source of investment advice that your baby brother....

Theres lots of rare things in the world but also the case that nobody has much use for them.    Rarer elements then gold exist yet gold is more highly valued because its unique properties matching usability.    Limited supply is just part of a price, also alot of demand would be the other side to it.    Some would even argue a greater supply allows for a possibly wider market reach and a wide initial distribution means greater growth or total market capitalisation which is why sometimes some alt coins or tokens are 'given' away, airdrop or whatever.   Alot of how economies work is counter intuitive I think.    In theory Dollar should have failed a long time ago, its liabilities far exceed the capability to repay debtors with correct value, a bit like the fuss with Greece remember.  Same for YEN, imagine Japan and USA value flooding the world as they become worthless, crypto across the spectrum would experience demand like a tsunami.

Anyhow bit OT but also I have found the latest drivers to help ETH for me at least, below 120w and >44 MH.  I know others have that or better even but this is very stable for me, easy to do.  Its possible ETH performs better then BTC for the near term which is good news when mining it.

[RIGED]

as mentioned in the previous page this is a pic of the missing thermal paste from manufacture

credit to Gamers Nexus youtube channel for the info, details on the pic

https://imgur.com/qLB8e0R

[RIGED]

best token I ever bought is the 300 (no whitepaper, roadmap, no functionality, no bullshit scam promises, just collectible)
unwavering support even with all cryptos retreating at this time
I am steadily increasing my position until I own 1% of total supply that's 3 tokens as there are and can ever be 300 tokens issued of which Dev team is still hodling 90 of them thus 210 remain in the open market making it impossible to manipulate like shittle sorry ripple and bitcoin

quick math
7.5 billion people in the world 210 tokens available
can you say super collectable?

As a fellow salty Norwegian, I need to ask you if you are joking or if you are sarcastic or something.... As of right now, I choose to believe it is way too cold and you are keeping warm in the sauna with some vodka and are a little drunk.

If you are sober please look for another source of investment advice that your baby brother....

this was not financial advice just an observation of value response to the crypto correction we are witnessing
I have been involved in the money markets for decades, and noticed this token primarily for its resilience to general market forces up or down
there is absolutely nothing valuable about it, it has no future prospects or planning, yet it seems the people involved are very passionate about holding it no matter what and it shows on the price fluctuations

do you think the promisory notes you and i are holding have any intrinsic value? or in laymans terms, do you believe the money you and i have has anything backing it besides a promise from the central bank that created it from thin air (and is lending it with interest)?

at least the 300 Dev is honest about it
price 0.085BTC

price update 6FEB2018  300 @ 0.16BTC
thats ~x2 in 4 days with all major cryptos receeding

[RIGED]

reading through any and all material I can find on the net concerning VEGA mining sheds lesser results than the ones im currently achieving,

this is not gloating but it boggles my mind that I am the only one around getting super stable:

claymore ETH @45.2MH/s with the 64s and 46.3MH/s with the FEs

gimme a minute I will post the NTool settings to achieve this, hey this thread is FREE WISDOM afterall  

btw i'm almost there getting the FE to run 4 threads on cryptonight ie 4000H/s /GPU,
before letting the cat out the bag i will be stocking up on FEs cause paying $3000 per FE is not something i want to do to myself

[Permonik]

reading through any and all material I can find on the net concerning VEGA mining sheds lesser results than the ones im currently achieving,

this is no gloating but it boggles my mind that I am the only one around getting super stable:

claymore ETH @45.2MH/s with the 64s and 46.3MH/s with the FEs

gimme a minute I will post the NTool settings im using to achieve this, hey this thread is FREE WISDOM afterall  

Ok, just post it to us
I assume that you are not concern about power consumption? It is above 200W?

[RIGED]

reading through any and all material I can find on the net concerning VEGA mining sheds lesser results than the ones im currently achieving,

this is no gloating but it boggles my mind that I am the only one around getting super stable:

claymore ETH @45.2MH/s with the 64s and 46.3MH/s with the FEs

gimme a minute I will post the NTool settings im using to achieve this, hey this thread is FREE WISDOM afterall  

Ok, just post it to us
I assume that you are not concern about power consumption? It is above 200W?

nope still around 180w, but as you said not that I care but most do
uploading now......

[RIGED]

https://imgur.com/azxtb3H

new setup for 64s using vaccum bags for filters on the sidewalls, front panel is removed in this pic

https://imgur.com/mjOoHYM

VEGA FRONTIER settings (GPU1 is running 1190Mz MEM thus the small hash delta will explain later)

https://imgur.com/aVdOygM

VEGA 64 x 6 RIG1

https://imgur.com/EqoBaJE

VEGA 64 x 6 RIG2

VEGA64 RIG 1 and 2 are in the box

show some reciprical lovin and hit that merit button if you think this is useful

ps oh bugger friggin typo on the above post its 44.2 for the 64s although i can get 45.2 but not stable on all cards still testing, sorry for that

edit: read on to 48.2MH/s

[RIGED]

ok here it is
4 out of 6 stable on the asus b250 mining

45.5MH/s ETH

settings are the same only MEM set to 1140MHz

https://imgur.com/qIb7Upu

if you have the same number VEGA registry folders as you do actual GPUs then the,
trick is NOT to set GPU1 on Ntool at 1140 but leave it on 1100 as its the one that works extra I have found and heats up more, I think its the first one you instal when doing them one by one

trying the fifth and reporting back...

[KL0nLutiy1]

reading through any and all material I can find on the net concerning VEGA mining sheds lesser results than the ones im currently achieving,

this is not gloating but it boggles my mind that I am the only one around getting super stable:

claymore ETH @45.2MH/s with the 64s and 46.3MH/s with the FEs

gimme a minute I will post the NTool settings to achieve this, hey this thread is FREE WISDOM afterall  

btw i'm almost there getting the FE to run 4 threads on cryptonight ie 4000H/s /GPU,
before letting the cat out the bag i will be stocking up on FEs cause paying $3000 per FE is not something i want to do to myself

What about 4 threads on FEs? is it successful?

[RIGED]

reading through any and all material I can find on the net concerning VEGA mining sheds lesser results than the ones im currently achieving,

this is not gloating but it boggles my mind that I am the only one around getting super stable:

claymore ETH @45.2MH/s with the 64s and 46.3MH/s with the FEs

gimme a minute I will post the NTool settings to achieve this, hey this thread is FREE WISDOM afterall  

btw i'm almost there getting the FE to run 4 threads on cryptonight ie 4000H/s /GPU,
before letting the cat out the bag i will be stocking up on FEs cause paying $3000 per FE is not something i want to do to myself

What about 4 threads on FEs? is it successful?

I'm getting xmr stak to register 4 threads on 1 FE, run the miner settings, connect to nanopool and detect packet and that's where it stops with the cursor flashing (ie not frozen)
maybe I'm not giving enough time or my start file is incorrect or the mem alloc  shoud be 25% lol I'm still testing as you can tell,
 I never tried using this miner before even with 1 thread per card, so maybe there is something basic I'm missing.

can you post a correct start file (AMD file too maybe) with 1 or 2 threads per card that works?
I could run a comparison this way otherwise I'm just doing this with no support (I'm used to it)
thinking in hex and not dec scale when setting values helps and no where else will you read this

short answer I'm getting there

[RIGED]

just to update,

I get all cards running at 45.5 apart from the first on in the NTool list and its very stable, that's 5/6 for a total of

272MH/s with 6 VEGA64

settings are the same as above but MEM P3 set at 1140MHz

still pushing to see if I can get more

[commonorx]

just to update,

I get all cards running at 45.5 apart from the first on in the NTool list and its very stable, that's 5/6 for a total of

272MH/s with 6 VEGA64

settings are the same as above but MEM P3 set at 1140MHz

Cool notes on ETH, but why bother with ETH on a vega? You just like to make less money or you are just a researcher and don't care about money?

[RIGED]

just to update,

I get all cards running at 45.5 apart from the first on in the NTool list and its very stable, that's 5/6 for a total of

272MH/s with 6 VEGA64

settings are the same as above but MEM P3 set at 1140MHz

Cool notes on ETH, but why bother with ETH on a vega? You just like to make less money or you are just a researcher and don't care about money?

you have obviously not read the thread
ETH is the most profitable and stable mine at the mo
and yes I am researching

correct me if I'm wrong I know little about cuda cards but is anyone mining ETH with ANY 6 GPUs faster than 272MH/s STABLE (or 45.5/card)?
I'm still pushing the envelope, maybe by tomorrow I will get another Mhash out of them lol

[KL0nLutiy1]

reading through any and all material I can find on the net concerning VEGA mining sheds lesser results than the ones im currently achieving,

this is not gloating but it boggles my mind that I am the only one around getting super stable:

claymore ETH @45.2MH/s with the 64s and 46.3MH/s with the FEs

gimme a minute I will post the NTool settings to achieve this, hey this thread is FREE WISDOM afterall  

btw i'm almost there getting the FE to run 4 threads on cryptonight ie 4000H/s /GPU,
before letting the cat out the bag i will be stocking up on FEs cause paying $3000 per FE is not something i want to do to myself

What about 4 threads on FEs? is it successful?

I'm getting xmr stak to register 4 threads on 1 FE, run the miner settings, connect to nanopool and detect packet and that's where it stops with the cursor flashing (ie not frozen)
maybe I'm not giving enough time or my start file is incorrect or the mem alloc  shoud be 25% lol I'm still testing as you can tell,
 I never tried using this miner before even with 1 thread per card, so maybe there is something basic I'm missing.

can you post a correct start file (AMD file too maybe) with 1 or 2 threads per card that works?
I could run a comparison this way otherwise I'm just doing this with no support (I'm used to it)
thinking in hex and not dec scale when setting values helps and no where else will you read this

short answer I'm getting there

Just use the last version of xmrstack it will automatically generate configs for vega cards:
https://github.com/fireice-uk/xmr-stak/releases/tag/v2.2.0

[RIGED]

thnx KL0nLutiy1 that's how I got the file to play with


I'm up to 48.2MH/s...

testing...

[RIGED]

 

                                                          275+MH/s

 from 6 Vega64  
                                                              ......  

[dragonmike]

Have you tried mining Neoscrypt with the Vegas? I read somewhere they should be able to easily reach 1200MH/s+. Might actually be more profitable than ETH if used on a Neoscrypt switching pool like Zergpool or Ahashpool. Should be able to try Gatelessgate Sharp or NSGminer.

[RIGED]

Have you tried mining Neoscrypt with the Vegas? I read somewhere they should be able to easily reach 1200MH/s+. Might actually be more profitable than ETH if used on a Neoscrypt switching pool like Zergpool or Ahashpool. Should be able to try Gatelessgate Sharp or NSGminer.

haven't tried neoscrypt yet, its next on the to do list though thanx for the pointers!

those here from pg1 know i have a thing about speed mining ETH (and getting 4 cryptonight threads on the FE )


                                                          275+MH/s

                                                        from 6 Vega64  
                                                              ......