HSRMINER Neoscrypt Fork by Justaminer - New Version!

[Just_a_miner]

The new version you posted is being detected as a virus with both Chrome and Edge.  The previous one was not.

Normal priority version - https://www.virustotal.com/#/file/dc0b4ee4dff16847a5fa53d8ad82d1c2a4661b9c67e7fcadea8ebe75b888fd78/detection

High priority version - https://www.virustotal.com/#/file/d6bf7149ff189d786f1ee0a5bf28befbd6a1fa12efe02cc27b08dc0de0d268f8/detection

These days most antiviruses mark almost any miner as at least suspicious, nothing you can do about it. Take any miner - original hsrminer, claymore dual eth miner, etc - all have some av detections.

[Just_a_miner]

Miner shows a higher speed then the pool and getting much more rejected shares. I will do a 24 run and compare it.

Try to use normal priority version, reduce overclock. Pool can't show correct speed of miner - it's always some kind of estimation, because miners doesn't report hashrate to pool, it just send result of solved work - shares. Pool then try to calculate speed of miner by number of shares it submited during some time period.

[Just_a_miner]

its close code and with binary you can't add and customize the software

Actually I can and you know why? Because I'm very powerfull - look here  

[Golku]

Miner shows a higher speed then the pool and getting much more rejected shares. I will do a 24 run and compare it.

Try to use normal priority version, reduce overclock. Pool can't show correct speed of miner - it's always some kind of estimation, because miners doesn't report hashrate to pool, it just send result of solved work - shares. Pool then try to calculate speed of miner by number of shares it submited during some time period.

Now i get Share Rejected, Low difficulty share

is there a setting where i can adjust the minimum difficulty ?

[jugger1028]

I was using Palgin's original HSR Miner for weeks.. It was a pretty good improvement over Klaust CCMiner for neoscrypt. When I was using one 1080 ti card I was getting around 1815kh/s. When I expanded my rig to 8 cards, the hashrate of the combined cards was closer to 1650kh/s. Still better than Klaust CCminer by about 5%. I guess because of multiple cards the efficiency went down.

Then I tried Just A Miner's fork with high intensity, same high OC settings I've always used (90tdp, +120core +600mem)... Combined hashrate for 8 1080 ti cards back up to 14.8mh/s, that gives an individual rate of 1850kh/s. I'm really impressed, and I want to thank you..

[Ayman84]

its close code and with binary you can't add and customize the software

Actually I can and you know why? Because I'm very powerfull - look here  

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256
https://imgur.com/a/FCw2I

[jugger1028]

I dunno what it was but I had some cards that were just really under performing, this miner has improved even the ones that were under performers.. I saw them in the low 1600's and this brought them to upper 1700's.. Not sure why the large disparity, since some of my cards hit 1900+ mining at the same time but I guess I just have a bad card.

[MinerMinor]

Getting about 1,300 hash on 1070 Ti. Is this normal or low?

Powerlimit 78% (140w average draw)
Clock +200
Memory +700

[dragonmike]

You know the best thing about this thread is your AutoIt script, right?


I love the thing!

Thanks!

Enjoy! 

Got a question though... Your script does not attempt to reconnect to the main pool automatically so it will keep mining on the "failover" until it crashes.
Is there a way you could implement an automatic reconnection attempt to pool 1, say, every 15min? I'm useless at coding otherwise I'd gladly try to do it myself...

[Filin4eg]

its close code and with binary you can't add and customize the software

Actually I can and you know why? Because I'm very powerfull - look here  

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256
https://imgur.com/a/FCw2I

Say please how you fix the diff with this miner?

[Ayman84]

its close code and with binary you can't add and customize the software

Actually I can and you know why? Because I'm very powerfull - look here  

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256
https://imgur.com/a/FCw2I

Say please how you fix the diff with this miner?

fix diff configuration only available when you mining with Zpool.ca
i just add after my password ,d=2048.
again its for Zpool not in general

[jugger1028]

You mine at 2048 difficulty? How do you know what difficulty is a good rate for your mining rig?

[Ayman84]

You mine at 2048 difficulty? How do you know what difficulty is a good rate for your mining rig?

just make sure that you can submits  5 to 15 shares per minute.

[SCSI2]

Good news and bad news...

Somewhat recent excavator build benches 10% more on 1080/1080ti. I'm getting 2.2MH/s vs 2.02MH/s all things the same.

Can I see the settings of your 1080ti and miner?

Here you can see my latest settings for 1080ti yielding 2.02MH/s: https://bitcointalk.org/index.php?topic=2765610.msg30101888#msg30101888

Excavator in same exact conditions was ~8-10% faster, but less stable over time.

[SCSI2]

Good news and bad news...

Somewhat recent excavator build benches 10% more on 1080/1080ti. I'm getting 2.2MH/s vs 2.02MH/s all things the same.

Most recent excavator gets pretty close on 1070/1060/1050ti but not quite there yet. Buggy and unstable compared to this HSRMiner fork.

Keeping all non-1080 rigs on it for now.

EDIT: sent some 0.006btc

Did you get 2.2Mh/s with PL 100% and overclocking?

120% PL and max OC on EVGA CS Black Edition.

[jugger1028]

You mine at 2048 difficulty? How do you know what difficulty is a good rate for your mining rig?

just make sure that you can submits  5 to 15 shares per minute.

When I look at the pool, it says I have 240s/s, I'm guessing that's 240 shares per second? I mine at 512 difficulty with about 15mh/s rig. Is 512 too low?

[pallas]

You mine at 2048 difficulty? How do you know what difficulty is a good rate for your mining rig?

just make sure that you can submits  5 to 15 shares per minute.

When I look at the pool, it says I have 240s/s, I'm guessing that's 240 shares per second? I mine at 512 difficulty with about 15mh/s rig. Is 512 too low?

That's 240 shares of value 1 per second. So with 512 diff, it's about one share submission every 2 seconds.
Difficulty doesn't matter that much. Let the pool choose it for you.

[Just_a_miner]

ok MR macho
can you explain this picture, why i see fees going to somewhere ?
i fix the diff to 2048 but here i can see diff 256

you haven't explained why did you post fake virustotal report and now you asking me to explain you some screenshot? I don't have much free time for such discussions, if you don't like this miner or have some fears, you are free to use any other neoscrypt miner, there are lot of them.

[Just_a_miner]

New version released!

I was able to add support for Maxwell GPUs - GTX 970, 980 and 980 Ti ! Testing was done with GTX 970, without overclocking with PL 100% I was able to get about 660-669 Kh/s.

Please test 980 and 980 Ti, if somebody still have them and feedback, I think that I will be able to tweak performance. If everything will be good, next release will be with Titan XP support, stay tuned!

[Just_a_miner]

You know the best thing about this thread is your AutoIt script, right?


I love the thing!

Thanks!

Enjoy! 

Got a question though... Your script does not attempt to reconnect to the main pool automatically so it will keep mining on the "failover" until it crashes.
Is there a way you could implement an automatic reconnection attempt to pool 1, say, every 15min? I'm useless at coding otherwise I'd gladly try to do it myself...

Yes, right now there is no "main" pool and "failover" in this script, just list of pools. I think it's possible to implement that, I will take a look when I get free minute.