SWA_HD
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 27, 2018, 09:38:25 AM |
|
Have theory that A3 was build on D3 and this is the reason some A3 (including mine) have problems with hash boards - appears/disappears, hashing/no hashing, all asics few only and then turning 0000 into xxxx... Nothing is helping to solve: rebooting, restarting, resetting, plugging / unplugging, each by one, separately, adding two AWP++ , changing controller cables 1/4, 2/4, 3/4, 4/4 Even flashing ( thank you blissz) - NOTHING But funny my D3 with A3 firmware turns into A3 miner, even connects to the SIA pool, but not hashing and after moment all asics turns xxxx This suggest than sia network or "brick attack" on 24th is not the real problem. The real is that bitmain cleaned D3 stock transforming them into A3 thought ____ NOW the funny moment. If/when somebody finds out hot to avoid that wall to make D3 (with A3 firmware) hashing on SIA network.... ....... ALL D3 would finally be able to deliver ROI
|
|
|
|
|
|
|
|
If you see garbage posts (off-topic, trolling, spam, no point, etc.), use the "report to moderator" links. All reports are investigated, though you will rarely be contacted about your reports.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
johnny_blaze
Newbie
Offline
Activity: 58
Merit: 0
|
|
January 27, 2018, 10:16:24 AM |
|
Have theory that A3 was build on D3 and this is the reason some A3 (including mine) have problems with hash boards - appears/disappears, hashing/no hashing, all asics few only and then turning 0000 into xxxx... Nothing is helping to solve: rebooting, restarting, resetting, plugging / unplugging, each by one, separately, adding two AWP++ , changing controller cables 1/4, 2/4, 3/4, 4/4 Even flashing ( thank you blissz) - NOTHING But funny my D3 with A3 firmware turns into A3 miner, even connects to the SIA pool, but not hashing and after moment all asics turns xxxx This suggest than sia network or "brick attack" on 24th is not the real problem. The real is that bitmain cleaned D3 stock transforming them into A3 thought ____ NOW the funny moment. If/when somebody finds out hot to avoid that wall to make D3 (with A3 firmware) hashing on SIA network.... ....... ALL D3 would finally be able to deliver ROI i'm thinking of vice versa - mining Dash by A3... even half hash rate would be fine lol
|
|
|
|
redalert11
Newbie
Offline
Activity: 76
Merit: 0
|
|
January 27, 2018, 10:20:40 AM |
|
Dfferent algos, its most likely hard coded. You won't be able to hash X11 with A3s for sure and vice versa.
|
|
|
|
FNT
Jr. Member
Offline
Activity: 75
Merit: 6
|
|
January 27, 2018, 10:31:05 AM |
|
also different chips/ chipsset is used on hashboards!
|
Trading with neural networks... https://forexneurotrader.com
|
|
|
nwo69
Newbie
Offline
Activity: 29
Merit: 0
|
|
January 27, 2018, 11:13:37 AM |
|
How many of you guys are having problems with the the A3 chains? In one of my A3s two of the chains are not working and in the other A3 on chain isn't working either. How hot are you allowing them to run? Man, you're the only one in here that understands what is going on with these units. 600 Frequency is jacked. These miners are OVERCLOCKED already. Now we got people that have no idea what they are doing, running these beasts on 120v circuits with inadequate PSU's and overclocking them. There is reports of meters showing 1400 watt pulls at the wall. Big amperage too. I'm running a couple and I know a bit about electricity. Not as much as you, but I know enough to know that these guys are playing with fire. Literally. If your breakers and wiring aren't extremely robust, you very may well end up with a tragic situation on your hands. These things are heating up my 12 gauge wire with new 20 amp 240 v breakers. If you do this with a bad or malfunctioning breaker, your breaker box is going up in flames. Maybe your house with it. Please think about what you are doing and do some serious research. These are COMMERCAIL miners that are running at Redline at the factory setting. This shit is NO JOKE! That's all I'll say. Good luck. Nope many A3 came 1 or 2 hashboard dead.So these people including myself know about warranty condisions, I guess they don't over clock their A3s.Because it is broken form beginning . Mine, 200V input and AWP++1600W normal clock. So, PCB temp is 58C and 62C . This is mostly BITMAIN issue. They send malfunctioning machine. Not user's. So it is simple, we just have to wait the BITMAIN do something. Better make repair ticket. And leave messages with GUI system & miner config picture. so
|
|
|
|
Tssar
Member
Offline
Activity: 120
Merit: 10
|
|
January 27, 2018, 01:54:38 PM |
|
How did you manage to get the firmware. I have been trying to reach them since 5 days! Can you send it to me please
|
|
|
|
jdbravo
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 27, 2018, 01:56:04 PM |
|
They sent to me the firmware too, but it's the same one that is already in the units. What is the name of the file did you receive?
|
|
|
|
Tssar
Member
Offline
Activity: 120
Merit: 10
|
|
January 27, 2018, 01:59:26 PM |
|
Have theory that A3 was build on D3 and this is the reason some A3 (including mine) have problems with hash boards - appears/disappears, hashing/no hashing, all asics few only and then turning 0000 into xxxx... Nothing is helping to solve: rebooting, restarting, resetting, plugging / unplugging, each by one, separately, adding two AWP++ , changing controller cables 1/4, 2/4, 3/4, 4/4 Even flashing ( thank you blissz) - NOTHING But funny my D3 with A3 firmware turns into A3 miner, even connects to the SIA pool, but not hashing and after moment all asics turns xxxx This suggest than sia network or "brick attack" on 24th is not the real problem. The real is that bitmain cleaned D3 stock transforming them into A3 thought ____ NOW the funny moment. If/when somebody finds out hot to avoid that wall to make D3 (with A3 firmware) hashing on SIA network.... ....... ALL D3 would finally be able to deliver ROI i'm thinking of vice versa - mining Dash by A3... even half hash rate would be fine lol Is it an assumption? Or you have done the switch from D3 to A3?
|
|
|
|
Cryptonica
Newbie
Offline
Activity: 28
Merit: 0
|
|
January 27, 2018, 02:33:50 PM |
|
Hello brokevin, Can you please send me a download link for the A3 firmware? "you has not chosen to allow messages from newbies" Thanks alot
|
|
|
|
BenRickert
|
|
January 27, 2018, 02:54:49 PM |
|
How many of you guys are having problems with the the A3 chains? In one of my A3s two of the chains are not working and in the other A3 on chain isn't working either. How hot are you allowing them to run? Man, you're the only one in here that understands what is going on with these units. 600 Frequency is jacked. These miners are OVERCLOCKED already. Now we got people that have no idea what they are doing, running these beasts on 120v circuits with inadequate PSU's and overclocking them. There is reports of meters showing 1400 watt pulls at the wall. Big amperage too. I'm running a couple and I know a bit about electricity. Not as much as you, but I know enough to know that these guys are playing with fire. Literally. If your breakers and wiring aren't extremely robust, you very may well end up with a tragic situation on your hands. These things are heating up my 12 gauge wire with new 20 amp 240 v breakers. If you do this with a bad or malfunctioning breaker, your breaker box is going up in flames. Maybe your house with it. Please think about what you are doing and do some serious research. These are COMMERCAIL miners that are running at Redline at the factory setting. This shit is NO JOKE! That's all I'll say. Good luck. Nope many A3 came 1 or 2 hashboard dead.So these people including myself know about warranty condisions, I guess they don't over clock their A3s.Because it is broken form beginning . Mine, 200V input and AWP++1600W normal clock. So, PCB temp is 58C and 62C . This is mostly BITMAIN issue. They send malfunctioning machine. Not user's. So it is simple, we just have to wait the BITMAIN do something. Better make repair ticket. And leave messages with GUI system & miner config picture. so These are two separate issues. I understand Bitmain sends faulty units. I was addressing the rampant lunacy of the users jacking their frequencies. I'm willing to bet that 90% of the guys Overclocking these units don't even own a Amp/Watt/Voltage tester.
|
|
|
|
ThugB33
Newbie
Offline
Activity: 45
Merit: 0
|
|
January 27, 2018, 03:00:12 PM |
|
A3 Owners, we are so screwed! Look how fast the profit goes down ... it's like almost diving by half....
we will hit the ROI in about 6 months , as dragonmint and obelisks will come to the network we have the similar D3 story on our hands! And this is a first batch....
We do still have hope for @blissz to create a custom FW which could mine the other algos and if it would be possible for D3's to mine a siacoin that would be a dream I want to live but looking back to earth make's me feel terrible!
I pray for @blissz! Let's all pray together!
Happy mining!
|
|
|
|
Moon2eth
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 27, 2018, 03:28:42 PM |
|
if it would be possible for D3's to mine a siacoin that would be a dream I want to live but looking back to earth make's me feel terrible!
I pray for @blissz! Let's all pray together!
Happy mining!
A dream for you and a nightmare for us. I pray the hundred thousands of D3 never leech into my Sia profits.
|
|
|
|
leowonderful
Legendary
Offline
Activity: 1624
Merit: 1129
Bitcoin FTW!
|
|
January 27, 2018, 03:32:49 PM |
|
A3 Owners, we are so screwed! Look how fast the profit goes down ... it's like almost diving by half....
we will hit the ROI in about 6 months , as dragonmint and obelisks will come to the network we have the similar D3 story on our hands! And this is a first batch....
We do still have hope for @blissz to create a custom FW which could mine the other algos and if it would be possible for D3's to mine a siacoin that would be a dream I want to live but looking back to earth make's me feel terrible!
I pray for @blissz! Let's all pray together!
Happy mining!
The A3 was made to mine the Blake2b algorithm and only the Blake2b algo. There's no way you can actually make the miner hash another algo unless you somehow changed the chips on it. It's an ASIC, not an FPGA. If it were the latter it might be possible, but the A3 is an ASIC. The best blissz could do is probably something similar to the D3 firmware or some improvements on it.
|
|
|
|
Boneyg001
Newbie
Offline
Activity: 81
Merit: 0
|
|
January 27, 2018, 04:59:31 PM |
|
D3 has like a 19 GH/s hashrate? Why would anyone want to mine "siacoin" with only a 19 Gh/s if they manage to convert the d3 to be able to mine it? Seems like you'd make next to nothing
|
|
|
|
premanand1984
Newbie
Offline
Activity: 29
Merit: 0
|
|
January 27, 2018, 05:18:49 PM |
|
Hi!
About electric/power usage: (APW3+) Default 600 MHz, 820 GH, 1300W, 230VAC, 67C 644 MHz, 875 GH, 1400W, 230VAC, 70C 668 MHz, 920GH, 1470W, 230VAC, 75C
Amps, 1500W/230VAC ~> 6,5Ampere Amps, 1500W/120VAC ~> 12,5Ampere
Bye, FNT
Thanks for sharing, did you try underclocking ? Or has anyone done this ? I would like to know what would the power usage if we underclock to 525/550/575 etc. Thanks.
|
|
|
|
giorgi4212
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 27, 2018, 05:29:17 PM |
|
Hi guys.I need your help with antminer A3 Firmare. If everyone have A3 firmware please send me.
Thanks.
|
|
|
|
Hendrikclaasen
Newbie
Offline
Activity: 47
Merit: 0
|
|
January 27, 2018, 06:24:35 PM |
|
|
|
|
|
floppydisk
Jr. Member
Offline
Activity: 92
Merit: 1
|
|
January 27, 2018, 06:43:38 PM |
|
Probably will settle circa $50-60 within next 3-4 days. Assuming no new delivery. If not $15-$25 is plausible within 7 days time frame.
|
|
|
|
johnny_blaze
Newbie
Offline
Activity: 58
Merit: 0
|
|
January 27, 2018, 06:51:43 PM |
|
Probably will settle circa $50-60 within next 3-4 days. Assuming no new delivery. If not $15-$25 is plausible within 7 days time frame. to have 20$ diff has to triple
|
|
|
|
pgbit
Sr. Member
Offline
Activity: 771
Merit: 258
Trident Protocol | Simple «buy-hold-earn» system!
|
|
January 27, 2018, 06:56:40 PM |
|
Anyone know of any other coin other than Sia that uses Blake 2 (or if any new ones using Blake 2 are planned)?
|
| . SECONDLIVE | | | │ | | | | | | │ | | | ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ S T A K E L I T T L E W I N B I G ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▄▄███████▄▄▄ ▄▄████████████████▄▄ ██████████████████████▄ ████████▀▀▀██████████████ ███████▌ ▀█████████████ ████████▀ ▀▀▄▄██▀▀▀██████████ ███████ ▀████████ ███████▄ ████████ ████████▄▄ ▄████████ ███████████▄▄▄▄██████████ ▀█████████████████████▀ ▀████████████████▀▀ ██████████████████████ |
|
|
|
|