stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 06:33:59 AM |
|
you tried that with the cube? I will try to setup and see. Thnks
|
|
|
|
TracerX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 06:50:44 AM |
|
you tried that with the cube? I will try to setup and see. Thnks It worked fine for me, yes.
|
|
|
|
vnhyp0
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 106
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 08:33:03 AM |
|
Just finished preparing an order of 8 cubes I ordered to test before running and went through the procedures I mentioned earlier in the thread.
EVERY cube had an issue, some small (heatsink screw loose), some larger (boards out of grooves, unseated, and missing screws from heatsink). With careful preparation/inspection, I got all 8 running with zero issues on normal or OC mode and hashing with no issues.
I just wanted to reiterate the importance of checking out your cube before starting it up; one could easily ruin one by not checking to make sure it has been assembled properly.
On a side note, I am running 4 cubes on OC that will operate on a EVGA SuperNOVA 1300G2 PSU with no problem.
|
QQ: 2228207157
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8451
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 10:49:38 AM |
|
Just finished preparing an order of 8 cubes I ordered to test before running and went through the procedures I mentioned earlier in the thread.
EVERY cube had an issue, some small (heatsink screw loose), some larger (boards out of grooves, unseated, and missing screws from heatsink). With careful preparation/inspection, I got all 8 running with zero issues on normal or OC mode and hashing with no issues.
I just wanted to reiterate the importance of checking out your cube before starting it up; one could easily ruin one by not checking to make sure it has been assembled properly.
On a side note, I am running 4 cubes on OC that will operate on a EVGA SuperNOVA 1300G2 PSU with no problem.
Listen to thislook at photos https://bitcointalk.org/index.php?topic=307095.msg4078067#msg4078067https://bitcointalk.org/index.php?topic=307095.msg4078633#msg4078633 under 30 minutes to check and fix my 4 cubes
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 12:41:10 PM |
|
My paperclips just don't look good.
An insulated thermostat wire (18 AWG) works quite well (and looks good). Just make a very small "U" out of it (approximately 3/4" long) and then strip both ends about 1/4". It can be secured further with a tape over it: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1330.photobucket.com%2Falbums%2Fw576%2Fvisdude%2FIMG_0011_zps0adefcc3.jpg&t=665&c=4sB4eCKdVV2ruA)
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 01:05:33 PM |
|
My paperclips just don't look good.
An insulated thermostat wire (18 AWG) works quite well (and looks good). Just make a very small "U" out of it (approximately 3/4" long) and then strip both ends about 1/4". It can be secured further with a tape over it: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1330.photobucket.com%2Falbums%2Fw576%2Fvisdude%2FIMG_0011_zps0adefcc3.jpg&t=665&c=4sB4eCKdVV2ruA) Do you have the correct pins? According to this it's the 4thand 5th in. http://www.corsair.com/en/blog/testing-your-corsair-power-supply
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 01:35:13 PM |
|
My paperclips just don't look good.
An insulated thermostat wire (18 AWG) works quite well (and looks good). Just make a very small "U" out of it (approximately 3/4" long) and then strip both ends about 1/4". It can be secured further with a tape over it: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1330.photobucket.com%2Falbums%2Fw576%2Fvisdude%2FIMG_0011_zps0adefcc3.jpg&t=665&c=4sB4eCKdVV2ruA) Do you have the correct pins? According to this it's the 4thand 5th in. http://www.corsair.com/en/blog/testing-your-corsair-power-supplySo far, I haven't toasted any ATX PSUs yet. Any black pinout (ground) can be used with the Power On pinout (green).
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 01:52:52 PM |
|
So far, I haven't toasted any ATX PSUs yet. Any black pinout (ground) can be used with the Power On pinout (green). [/quote] Good to know. :-)
|
|
|
|
miaviator
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 03:34:36 PM |
|
My paperclips just don't look good.
An insulated thermostat wire (18 AWG) works quite well (and looks good). Just make a very small "U" out of it (approximately 3/4" long) and then strip both ends about 1/4". It can be secured further with a tape over it: That is not any better than paperclips. I was saying that in comparison to my paperclips a power on plug or adapter looks really nice.
|
|
|
|
SilentSonicBoom (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 04:04:59 PM |
|
12/24/13 All new orders/preorders are on hold. I am not taking any more orders for cubes and/or other products right now as I wait for more inventory to arrive. Cube preorders already placed I hope to ship the 27th and 28th if AsicMiner gets them to me in time. If not, a refund will be offered. Any other orders placed in the last few days I am working to ship in the next two days. I am working on catching up on pms and emails. Thank you. SSB
|
|
|
|
bgibso01
Legendary
Offline
Activity: 1218
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 05:24:27 PM |
|
Great news!!! Enjoy the holidays!
|
|
|
|
daddyfatsax
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 06:27:11 PM |
|
Got my cubes today and they are hashing away. Thanks SSB!!!
|
|
|
|
Bobs Yerunkle
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 90
Merit: 10
Untitled
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2013, 06:35:10 PM |
|
Cube shaped box in hand. Thanks SSB!
|
|
|
|
Miner_2049er
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 12:42:44 AM |
|
Anyone heard from SSB lately? I sent him a large sum of coins last week for cubes and haven't heard back.
I also have not heard from SSB since the four PMs I sent since Dec 21-23. I went to the expense of having my latest cube sent via Express Mail and it arrived promptly and safely, however it is DOA. Tried a few things but it's not hashing. Had two loose screws inside that were tightened up, which seems to be typical for these things. The other two cubes in my rig are A-OK. -Mark
|
|
|
|
Miner_2049er
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 01:11:31 AM |
|
To clarify, the start signal is on the 4th pin, and it can be grounded to the 3rd or 5th pin, which are both ground (among many others)
|
|
|
|
edgie13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 02:40:42 AM |
|
One of the three cubes that I just received has burnt 2 fuses. As soon as I turn on the psu, I hear a crackling sound and it shuts down. The fuse totally burns out. I did all the recommend cube prep on all of these and the other 2 are working fine. Does anyone have any suggestions on what else I can do to resolve this? Thanks.
|
BTC Scotch fund: 1GFZos2WGknCeVgDtjpHwo3jeJ4tSLVrXS
|
|
|
stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 02:52:47 AM |
|
One of the three cubes that I just received has burnt 2 fuses. As soon as I turn on the psu, I hear a crackling sound and it shuts down. The fuse totally burns out. I did all the recommend cube prep on all of these and the other 2 are working fine. Does anyone have any suggestions on what else I can do to resolve this? Thanks.
Not sure if this help, but I had troubles with my cube. I took out all the blades and started running them one by one. Doing this I realized I had 1 faulty blades at was giving me all the strange problems. Can't believe one faulty blade gave me so many problems, and having that n the cube gave problems while starting.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8451
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 05:00:56 AM |
|
One of the three cubes that I just received has burnt 2 fuses. As soon as I turn on the psu, I hear a crackling sound and it shuts down. The fuse totally burns out. I did all the recommend cube prep on all of these and the other 2 are working fine. Does anyone have any suggestions on what else I can do to resolve this? Thanks.
okay pull the fuse and pull all the blades but 1 in the first slot. keep the fuse out and turn the psu up. the fan should turn on as the fan works with no fuses. if the fan works put the fuse in. 1 blade in 1 slot. if it works you know the first slot is good and the blade is good. power down move the 1 good blade to the second slot. hopefully the blade will work in every slot. this will mean 1 good blade and all slots good. add the second blade. add the third blade if it works . add the fourth blade. you could have a bad board. or 1 or more bad blades.
|
|
|
|
edgie13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 12:18:05 PM |
|
Thank you stex2009 and philipma1957.
|
BTC Scotch fund: 1GFZos2WGknCeVgDtjpHwo3jeJ4tSLVrXS
|
|
|
Megabit monster
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 126
Merit: 100
Will work for BitCoins
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2013, 04:43:12 PM |
|
Hey guys,
I have one of these cubes and I'm not sure how to actually get it to run with the clock set to high. It runs fine in low, but the second I set it to high I get all xxxx across all boards and all chips. I asked SSB who suggested I post in this thread for any tips. I have done the reseat/reboot/tighten down heat syncs etc. can anyone make some helpful suggestions who has seen this problem?
|
Cisco CCNP + CCIE Written. Open to various networking/VOIP related projects. Accept bitcoin for payments. Extensive successful project history.
|
|
|
|