Seuntjies DiceBot -Multi-Site, multi-strategy betting bot for dice. With Charts!

[seuntjie]

Are you ever going to make a PD bot? We could use a reliable bot, they're much needed over autobet

Check out the alpha version, download link is on the previous page.

seuntjie, what about my question on previous page?
Bot is still regular crash when choosing strategy (Win7 x32). Is possible fix it?.
Thanks.

I've been busy with other work and I have not yet had chance to work on the bot.

But here goes the questions.
What is manual settings? I don't know what manual settings in the bot is.
Does it work when it's not on "manual settings"?
where are you from?

If your computers calculator uses a comma instead of a period, try setting your date and number format to english US before opening the bot.

[Monopoly]

Does not work on 999dice.
http://prntscr.com/6jawk2
http://prntscr.com/6jaxi0
http://prntscr.com/6jay20
http://prntscr.com/6jayyy

Thank you for the detailed screenshots, I'll take a look asap. Where are you from? I'm pretty sure this is a regional problem.

http://prntscr.com/6jetcs

from 40k doge ^^ UP UP UP


do you think this will bust suent? if you tell me before it does ill tip you 10k doge lolz

All strategies bust eventually. Just give it enough time and it will bust. So I suggest you set a profit target and stop if you reach it.

http://prntscr.com/6jhb4r

NO THERE hasw to be a way lol i took a few hits just took a 10k hit :/ but ill sned u 10k since technically it didnt bust
I started with 40k so still doubled up.........  my goal is infinity! lol

Seuntjie is right !
Because of House of edge any strategy failed in long term .  Anyway , Could you share your setting ?

Its been goign 24+ hour snow! gonna withdraw about 100k, send 10k to suent ,   If you tip me or suent ill share haha  I want ot run for another day and see if I'm still going... if I can get another 100k+ doge in 24 hours, i think it will be a solids strat!


http://prntscr.com/6jnzbe






almost busted to ojust after i posted that haha


http://prntscr.com/6jo1mb



Look if that spike happened before that crazy spike that went down and jumped up fast i would have busted... I was one bet away from busting there. 

http://prntscr.com/6jo9w8


Think i'm going to cut my base bet by 4 or 5, and start over with a 40k bankroll again.

24 hours is usually when I bust, that was prob my bust mode but I survived with only a ~6k doge hit

can i have your strategy too??

its look you decrease bet when you win? right? but bet stay when you loss..gonna try it..

Probably he get busted and leave .

[funtotry]

Are you ever going to make a PD bot? We could use a reliable bot, they're much needed over autobet

I think that their API is very limited in requests and their API is also limited. Their autobet is also pretty good and I would be fine in keeping it (no reason to pay for another bot). PD works perfect for martingale and it has been very profitable for me.

[seuntjie]

Are you ever going to make a PD bot? We could use a reliable bot, they're much needed over autobet

I think that their API is very limited in requests and their API is also limited. Their autobet is also pretty good and I would be fine in keeping it (no reason to pay for another bot). PD works perfect for martingale and it has been very profitable for me.

Like i said, The alpha version of v3 already supports primedice. Stunna was generous enough to pay for the bot, so you all can get it for free. Latest download link is just on the previous page

[nyktalgia1]

Nope I never busted.  I did try runnin 8 bots, 2 busted but I think its cuz I turned on autowithdraw and my basebet was set too high.    The original bot I still havent busted..

http://prntscr.com/6kf2o6   - all from 40k doge bank about ~ .02

It is the one with the big drop cuz I reset the stats, I wish I hadn't just so you can see it continually climb.

I'll give my strat for .01 which is more than fair seeing as how you will make that back within a day, which I will give a portion to suent.  Donate to the programmer ya cheap bastards!

[Monopoly]

Nope I never busted.  I did try runnin 8 bots, 2 busted but I think its cuz I turned on autowithdraw and my basebet was set too high.    The original bot I still havent busted..

http://prntscr.com/6kf2o6   - all from 40k doge bank about ~ .02

It is the one with the big drop cuz I reset the stats, I wish I hadn't just so you can see it continually climb.

I'll give my strat for .01 which is more than fair seeing as how you will make that back within a day, which I will give a portion to suent.  Donate to the programmer ya cheap bastards!

Report your states every day .

[anshar]

999dice is a scam, why promote it with this bot?

[Monopoly]

999dice is a scam, why promote it with this bot?

Prove it .

[anshar]

999dice is a scam, why promote it with this bot?

Prove it .

Are you really trying to tell me 999dice isn't rigged?

LOL

[seuntjie]

999dice is a scam, why promote it with this bot?

Prove it .

Are you really trying to tell me 999dice isn't rigged?

LOL

Rigged or not it pays out instantly when you withdraw sooooo how is it a scam?

Not on this thread please. This thread is to discuss the bot, not how scammy the sites are. Take it somewhere else.

[rayhan]

Rigged or not it pays out instantly when you withdraw sooooo how is it a scam?

he said it was a scam site maybe because he lost a lot there, and this is not a discussion of scam issues
  we are here to discuss about bots and seuntjie bot works well on these sites

[Monopoly]

999dice is a scam, why promote it with this bot?

Prove it .

Are you really trying to tell me 999dice isn't rigged?

LOL

I heard something like that many times but unfortunately There isn't any proof for it !

[Rulishix]

999dice is a scam, why promote it with this bot?

Prove it .

Are you really trying to tell me 999dice isn't rigged?

LOL

Rigged or not it pays out instantly when you withdraw sooooo how is it a scam?

Not on this thread please. This thread is to discuss the bot, not how scammy the sites are. Take it somewhere else.

Understood. Not trying to start anything. The site pays out fine and the bot works well on 999dice so well done!

[velesgs]

http://c2n.me/3eQ69Tz

bug fix please

[seuntjie]

http://c2n.me/3eQ69Tz

bug fix please

Where are you from?
on which site are you betting?
what do you do when this happens?
which build are you using?
I need more details.

[Monopoly]

Hello seuntjie

How i do something that  , after wining follow a loss don't back to base bet ?


Example :

My base bet is 10 Doge ,
After loss multiple by 1.1 so bet is 11
After winning bot reset back to 10 doge but i want continue by 11 doge on next bet , Not 10 doge ( in martingale system ) .

[seuntjie]

Hello seuntjie

How i do something that  , after wining follow a loss don't back to base bet ?


Example :

My base bet is 10 Doge ,
After loss multiple by 1.1 so bet is 11
After winning bot reset back to 10 doge but i want continue by 11 doge on next bet , Not 10 doge ( in martingale system ) .

You'll need to write a lua script for this.

something like:

Code:

function dobet()
if not win then
nextbet=previousbet * 1.1
end

end

If I understand you correctly, that should do it.

[chilly2k]

Hello seuntjie

How i do something that  , after wining follow a loss don't back to base bet ?


Example :

My base bet is 10 Doge ,
After loss multiple by 1.1 so bet is 11
After winning bot reset back to 10 doge but i want continue by 11 doge on next bet , Not 10 doge ( in martingale system ) .

You'll need to write a lua script for this.

something like:

Code:

function dobet()
if not win then
nextbet=previousbet * 1.1
end

end

If I understand you correctly, that should do it.

  Seuntjie,

   Played around with the programmer mode.  How do you save the code?  I was hoping it was automatic, but after a crash and losing my code, I find it is not.  
I can't seem to cut/paste in the code box either...  Can I put it into a file and have it automatically loaded?  

EDIT: ctrl-c and ctrl-v work, so I'm able to code it up in note pad and copy it over...


   A few questions came to mind while playing around.  How is the first roll's input determined?  IE the bet amount and hi/low?  I added a few variable inits before the dobet() function.  They seem to get set correctly, but not before the first roll..  

I don't know how many people you have using the programmer mode, but a cool addition would be to have a few screen areas defined for input and output.  This would allow changing parms from the panel, and displaying some output related to the run.  

I coded up the mutawa function with a zig/zag twist.  It was working great till the bot crashed and I lost it all.  Not a huge deal about 40 lines of code,  and I remember most of it...    

[seuntjie]

 Seuntjie,

   Played around with the programmer mode.  How do you save the code?  I was hoping it was automatic, but after a crash and losing my code, I find it is not.  
I can't seem to cut/paste in the code box either...  Can I put it into a file and have it automatically loaded?  

EDIT: ctrl-c and ctrl-v work, so I'm able to code it up in note pad and copy it over...

As of yet, I haven't added a way of saving the code automatically or loading code into the bot. Been meaning to do so, just haven't gotten around to it.

for now, you can use the dofile() method to load from a file.

To do this, just delete the dobet function from the code box (would be best if it's empty), then execute dofile("your script name.txt") from the console. If you start the bot now, the loaded method will be executed. Alternatively you can replace the code in the code box with dofile and just start the bot normally.

Note: It's important that the dobet() function is NOT in the code box when you start betting. when executing start(), the code in the code box is executed. If dobet is present, it will override the one in your file.

  A few questions came to mind while playing around.  How is the first roll's input determined?  IE the bet amount and hi/low?  I added a few variable inits before the dobet() function.  They seem to get set correctly, but not before the first roll..  

At the moment, the first roll is determined by the base bet text box in the basic and advanced modes, same for chance and it defaults to betting high. In build 9 there is a bug that prevents changing these values from outside the dobet function, but I've been working on improving it and the next version will fix these issues.

Some of these issues has already been fixed and the code has been committed to github if you want to compile the bot yourself and test it out.

I don't know how many people you have using the programmer mode, but a cool addition would be to have a few screen areas defined for input and output.  This would allow changing parms from the panel, and displaying some output related to the run.  

The console is there to allow input and output. you can declare and set variables using the console, as well as get their values using the print function. you can also use the print function from inside your code to print applicable info to the console during the run. The stats windows and some other hidden features will be view-able while in the programmer mode in the next build (these updates has already been committed to github).

The console is pretty much like a javascript console. You can execute just about any code from it.

I coded up the mutawa function with a zig/zag twist.  It was working great till the bot crashed and I lost it all.  Not a huge deal about 40 lines of code,  and I remember most of it...    

Sorry to hear you lost the code. I know it's an inconvenience and I will make it save the settings automatically soon.
Would be great if you could send the error details from when the bot crashed though, Hard for me to fix errors if i don't know what they are




Edit: github repo: https://github.com/seuntie900/DiceBot

[chilly2k]

 Seuntjie,

   Played around with the programmer mode.  How do you save the code?  I was hoping it was automatic, but after a crash and losing my code, I find it is not.  
I can't seem to cut/paste in the code box either...  Can I put it into a file and have it automatically loaded?  

EDIT: ctrl-c and ctrl-v work, so I'm able to code it up in note pad and copy it over...

As of yet, I haven't added a way of saving the code automatically or loading code into the bot. Been meaning to do so, just haven't gotten around to it.

for now, you can use the dofile() method to load from a file.

To do this, just delete the dobet function from the code box (would be best if it's empty), then execute dofile("your script name.txt") from the console. If you start the bot now, the loaded method will be executed. Alternatively you can replace the code in the code box with dofile and just start the bot normally.

Note: It's important that the dobet() function is NOT in the code box when you start betting. when executing start(), the code in the code box is executed. If dobet is present, it will override the one in your file.

  A few questions came to mind while playing around.  How is the first roll's input determined?  IE the bet amount and hi/low?  I added a few variable inits before the dobet() function.  They seem to get set correctly, but not before the first roll..  

At the moment, the first roll is determined by the base bet text box in the basic and advanced modes, same for chance and it defaults to betting high. In build 9 there is a bug that prevents changing these values from outside the dobet function, but I've been working on improving it and the next version will fix these issues.

Some of these issues has already been fixed and the code has been committed to github if you want to compile the bot yourself and test it out.

I don't know how many people you have using the programmer mode, but a cool addition would be to have a few screen areas defined for input and output.  This would allow changing parms from the panel, and displaying some output related to the run.  

The console is there to allow input and output. you can declare and set variables using the console, as well as get their values using the print function. you can also use the print function from inside your code to print applicable info to the console during the run. The stats windows and some other hidden features will be view-able while in the programmer mode in the next build (these updates has already been committed to github).

The console is pretty much like a javascript console. You can execute just about any code from it.

I coded up the mutawa function with a zig/zag twist.  It was working great till the bot crashed and I lost it all.  Not a huge deal about 40 lines of code,  and I remember most of it...    

Sorry to hear you lost the code. I know it's an inconvenience and I will make it save the settings automatically soon.
Would be great if you could send the error details from when the bot crashed though, Hard for me to fix errors if i don't know what they are




Edit: github repo: https://github.com/seuntie900/DiceBot

Perfect...  Sounds like you have most of the stuff covered.  I was able to recreate the code pretty easy.  I just created it yesterday...   It takes more then a day to forget what the heck I did...    I've been just pasting the code into the code area for now.  I'll play with the file functions a little later. 

   I did crash a few more times.  What info are you looking for? I really just get a little pop-up that says dice-bot has crashed, close the program....  Not sure if there is some setting I can check to get better info...