Seuntjies DiceBot -Multi-Site, multi-strategy betting bot for dice. With Charts!

[seuntjie]

no its not a condition its bug 100% i checked everything 10000 times do u cant to contact and check it in skype?
in 999dice,safedice working perfect only in dadice working bad...

I'll take a look, But I have not been able to reproduce the problem....

Just wondering... how are people logging into JD on build 12?  or any of the v3 builds?  I can log into PD with no problem but JD seems to freeze up for about a minute and then posts the message box "Failed to log in or register new account!"  But I'm entering the credentials precisely and it works anywhere else.

thx for any help.

Did you select the site you're logging in to in the top left menu? There's an item called Site with the selected site in brackets behind it. Just expand it and you will be able to select one of the other sites to log in to. And remember, JD has case sensitive usernames, some people seem to forget about that.

[grendel25]

Just wondering... how are people logging into JD on build 12?  or any of the v3 builds?  I can log into PD with no problem but JD seems to freeze up for about a minute and then posts the message box "Failed to log in or register new account!"  But I'm entering the credentials precisely and it works anywhere else.

thx for any help.

Did you select the site you're logging in to in the top left menu? There's an item called Site with the selected site in brackets behind it. Just expand it and you will be able to select one of the other sites to log in to. And remember, JD has case sensitive usernames, some people seem to forget about that.

Seuntjie,

Thanks for the reply.  I double checked and retried and it still gives the same error.  Yes, I selected the 3rd menu option from the left "Site (JD)".  The only other thing I should mention is that I'm using the 2fa Code but again, that works for PD.  I just tried disabling 2fa on one of my other accounts and then tried again but it just does the same thing.  It freezes for about a minute and then gives the error message window.

I also tried deleting the dicebot2 folder in the users/appdata/roaming directory and it does the same thing.

[chilly2k]

Just wondering... how are people logging into JD on build 12?  or any of the v3 builds?  I can log into PD with no problem but JD seems to freeze up for about a minute and then posts the message box "Failed to log in or register new account!"  But I'm entering the credentials precisely and it works anywhere else.

thx for any help.

Did you select the site you're logging in to in the top left menu? There's an item called Site with the selected site in brackets behind it. Just expand it and you will be able to select one of the other sites to log in to. And remember, JD has case sensitive usernames, some people seem to forget about that.

Seuntjie,

Thanks for the reply.  I double checked and retried and it still gives the same error.  Yes, I selected the 3rd menu option from the left "Site (JD)".  The only other thing I should mention is that I'm using the 2fa Code but again, that works for PD.  I just tried disabling 2fa on one of my other accounts and then tried again but it just does the same thing.  It freezes for about a minute and then gives the error message window.

I also tried deleting the dicebot2 folder in the users/appdata/roaming directory and it does the same thing.

   I've been using build12 on 2 different accounts on JD without any problems.  I do not use 2FA.  Since you deleted the settings directory, it should be exactly the same as logging in from a webpage.   

[austinsimonson]

This bot has many advanced strategies. Anyway I would like to see a bot who can change the client seed.

[grendel25]

I've tried rebooting and tried on a Win 7 64 bit and a Win 8 64 bit computer but JD just won't work for me in the v3.  Any other site gives a fast reply on the login but the JD login seems to freeze for a minute and then give an error.

It will work in v2.5 but the problem in v2.5 is that it frequently hangs and the seed refresh seems like it takes a long time.  

Is there any debug to run for v3 to see what it's doing when I try to login to JD?

Don't 999 and JD use similar API?  The login content for the .cs files are very different between the cs files but I have no idea what to do with those files.  I was able to open them in MS Visual Studio Express and that's about the extent of my programming talent.

Not sure if this helps but this is from the jdcapilog.txt file:

Code:

5/30/2015 7:41:38 AM 1::
5/30/2015 7:41:48 AM caught!The operation has timed out
5/30/2015 7:41:58 AM caught!The operation has timed out
5/30/2015 7:42:08 AM caught!The operation has timed out
5/30/2015 7:42:18 AM caught!The operation has timed out
5/30/2015 7:42:28 AM caught!The operation has timed out
5/30/2015 7:43:07 AM 1::
5/30/2015 7:43:17 AM caught!The operation has timed out
5/30/2015 7:43:27 AM caught!The operation has timed out
5/30/2015 7:43:37 AM caught!The operation has timed out
5/30/2015 7:43:47 AM caught!The operation has timed out
5/30/2015 7:43:57 AM caught!The operation has timed out
5/30/2015 7:45:36 AM 1::
5/30/2015 7:45:46 AM caught!The operation has timed out
5/30/2015 7:45:56 AM caught!The operation has timed out
5/30/2015 7:46:06 AM caught!The operation has timed out
5/30/2015 7:46:16 AM caught!The operation has timed out
5/30/2015 7:46:26 AM caught!The operation has timed out
5/30/2015 7:47:34 AM 1::
5/30/2015 7:47:44 AM caught!The operation has timed out
5/30/2015 7:47:54 AM caught!The operation has timed out
5/30/2015 7:48:04 AM caught!The operation has timed out
5/30/2015 7:48:14 AM caught!The operation has timed out
5/30/2015 7:48:24 AM caught!The operation has timed out
5/30/2015 8:28:47 AM 1::
5/30/2015 8:28:57 AM caught!The operation has timed out
5/30/2015 8:29:07 AM caught!The operation has timed out
5/30/2015 8:29:17 AM caught!The operation has timed out
5/30/2015 8:29:27 AM caught!The operation has timed out
5/30/2015 8:29:37 AM caught!The operation has timed out

[chilly2k]

This bot has many advanced strategies. Anyway I would like to see a bot who can change the client seed.

   This one can. 

[seuntjie]

I've tried rebooting and tried on a Win 7 64 bit and a Win 8 64 bit computer but JD just won't work for me in the v3.  Any other site gives a fast reply on the login but the JD login seems to freeze for a minute and then give an error.

It will work in v2.5 but the problem in v2.5 is that it frequently hangs and the seed refresh seems like it takes a long time.  

Is there any debug to run for v3 to see what it's doing when I try to login to JD?

Don't 999 and JD use similar API?  The login content for the .cs files are very different between the cs files but I have no idea what to do with those files.  I was able to open them in MS Visual Studio Express and that's about the extent of my programming talent.

Not sure if this helps but this is from the jdcapilog.txt file:

Code:

5/30/2015 7:41:38 AM 1::
5/30/2015 7:41:48 AM caught!The operation has timed out
5/30/2015 7:41:58 AM caught!The operation has timed out
5/30/2015 7:42:08 AM caught!The operation has timed out
5/30/2015 7:42:18 AM caught!The operation has timed out
5/30/2015 7:42:28 AM caught!The operation has timed out
5/30/2015 7:43:07 AM 1::
5/30/2015 7:43:17 AM caught!The operation has timed out
5/30/2015 7:43:27 AM caught!The operation has timed out
5/30/2015 7:43:37 AM caught!The operation has timed out
5/30/2015 7:43:47 AM caught!The operation has timed out
5/30/2015 7:43:57 AM caught!The operation has timed out
5/30/2015 7:45:36 AM 1::
5/30/2015 7:45:46 AM caught!The operation has timed out
5/30/2015 7:45:56 AM caught!The operation has timed out
5/30/2015 7:46:06 AM caught!The operation has timed out
5/30/2015 7:46:16 AM caught!The operation has timed out
5/30/2015 7:46:26 AM caught!The operation has timed out
5/30/2015 7:47:34 AM 1::
5/30/2015 7:47:44 AM caught!The operation has timed out
5/30/2015 7:47:54 AM caught!The operation has timed out
5/30/2015 7:48:04 AM caught!The operation has timed out
5/30/2015 7:48:14 AM caught!The operation has timed out
5/30/2015 7:48:24 AM caught!The operation has timed out
5/30/2015 8:28:47 AM 1::
5/30/2015 8:28:57 AM caught!The operation has timed out
5/30/2015 8:29:07 AM caught!The operation has timed out
5/30/2015 8:29:17 AM caught!The operation has timed out
5/30/2015 8:29:27 AM caught!The operation has timed out
5/30/2015 8:29:37 AM caught!The operation has timed out

the 999dice and JD api's aren't even close. They're nothing alike.

It looks like the api has problems connecting to the site. Is your internet connection stable and how fast is it? If you're using a vpn, try connecting without it or using another one.

I tested connecting with the 2fa and was able to connect without a problem.

[seuntjie]

This bot has many advanced strategies. Anyway I would like to see a bot who can change the client seed.

   This one can. 

This one can change the server seed. I've been planning on allowing it to set the client seed as well, Just haven't gotten around to it

[erf]

Dear Seuntije

when will you solve Dadice problems? I mean balance problem and stopping after while

[seuntjie]

Dear Seuntije

when will you solve Dadice problems? I mean balance problem and stopping after while

Well i haven't experienced the stopping problem, but I'm working on it. Should be soon

[erf]

Dear Seuntije

when will you solve Dadice problems? I mean balance problem and stopping after while

Well i haven't experienced the stopping problem, but I'm working on it. Should be soon

I sent you at this post the stopping problem , actually it takes few minutes to stop

https://bitcointalk.org/index.php?topic=307425.msg11457061#msg11457061

[grendel25]

I've tried rebooting and tried on a Win 7 64 bit and a Win 8 64 bit computer but JD just won't work for me in the v3.  Any other site gives a fast reply on the login but the JD login seems to freeze for a minute and then give an error.

It will work in v2.5 but the problem in v2.5 is that it frequently hangs and the seed refresh seems like it takes a long time.  

Is there any debug to run for v3 to see what it's doing when I try to login to JD?

Don't 999 and JD use similar API?  The login content for the .cs files are very different between the cs files but I have no idea what to do with those files.  I was able to open them in MS Visual Studio Express and that's about the extent of my programming talent.

Not sure if this helps but this is from the jdcapilog.txt file:

Code:

5/30/2015 7:41:38 AM 1::
5/30/2015 7:41:48 AM caught!The operation has timed out
5/30/2015 7:41:58 AM caught!The operation has timed out
5/30/2015 7:42:08 AM caught!The operation has timed out
5/30/2015 7:42:18 AM caught!The operation has timed out
5/30/2015 7:42:28 AM caught!The operation has timed out
5/30/2015 7:43:07 AM 1::
5/30/2015 7:43:17 AM caught!The operation has timed out
5/30/2015 7:43:27 AM caught!The operation has timed out
5/30/2015 7:43:37 AM caught!The operation has timed out
5/30/2015 7:43:47 AM caught!The operation has timed out
5/30/2015 7:43:57 AM caught!The operation has timed out
5/30/2015 7:45:36 AM 1::
5/30/2015 7:45:46 AM caught!The operation has timed out
5/30/2015 7:45:56 AM caught!The operation has timed out
5/30/2015 7:46:06 AM caught!The operation has timed out
5/30/2015 7:46:16 AM caught!The operation has timed out
5/30/2015 7:46:26 AM caught!The operation has timed out
5/30/2015 7:47:34 AM 1::
5/30/2015 7:47:44 AM caught!The operation has timed out
5/30/2015 7:47:54 AM caught!The operation has timed out
5/30/2015 7:48:04 AM caught!The operation has timed out
5/30/2015 7:48:14 AM caught!The operation has timed out
5/30/2015 7:48:24 AM caught!The operation has timed out
5/30/2015 8:28:47 AM 1::
5/30/2015 8:28:57 AM caught!The operation has timed out
5/30/2015 8:29:07 AM caught!The operation has timed out
5/30/2015 8:29:17 AM caught!The operation has timed out
5/30/2015 8:29:27 AM caught!The operation has timed out
5/30/2015 8:29:37 AM caught!The operation has timed out

the 999dice and JD api's aren't even close. They're nothing alike.

It looks like the api has problems connecting to the site. Is your internet connection stable and how fast is it? If you're using a vpn, try connecting without it or using another one.

I tested connecting with the 2fa and was able to connect without a problem.

seuntjie, thanks again for replying.  My internet connection is stable and fast (50 Mb/s).  I'm not using a vpn.  JD works fine in v2.5 but I haven't been able to get it to work with any of the v3 versions and I've tried them all and I've tested on two different computers and with a VPN and without a VPN.  

PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions.  The nonce count is nice too.  Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.

No one else out there having problems connecting to JD in the v3 bot?  Is there debug I could run in programming mode to learn more about the issue?  Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall?  But... I'm pretty sure I tried disabling my firewall too.  idk, may try that again.

btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet.  I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again.  seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.

[seuntjie]

Dear Seuntije

when will you solve Dadice problems? I mean balance problem and stopping after while

Well i haven't experienced the stopping problem, but I'm working on it. Should be soon

I sent you at this post the stopping problem , actually it takes few minutes to stop

https://bitcointalk.org/index.php?topic=307425.msg11457061#msg11457061

That should be fixed in the next build yes.

seuntjie, thanks again for replying.  My internet connection is stable and fast (50 Mb/s).  I'm not using a vpn.  JD works fine in v2.5 but I haven't been able to get it to work with any of the v3 versions and I've tried them all and I've tested on two different computers and with a VPN and without a VPN. 

PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions.  The nonce count is nice too.  Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.

No one else out there having problems connecting to JD in the v3 bot?  Is there debug I could run in programming mode to learn more about the issue?  Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall?  But... I'm pretty sure I tried disabling my firewall too.  idk, may try that again.

btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet.  I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again.  seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.

It's very odd that you can't connect to JD. Have you tried the latest build of the bot (build 12)? I recently updated the API the bot uses to connect to JD to make it a bit more stable, so maybe that works. And yes, the bot communicates on a fundamentally different way with the sites in v3 from v2, but it still uses https, it won't get blocked by your firewall as long as you can browse the internet. Unfortunately there is no debug you can run at this time.

The only issue I can think of is that it for some odd reason tries to connect to doge-dice instead of JD, but you would need to have changed some of the code for that to happen. If you haven't yet, try build 12 and see if that works better. I'm sorry you're having these issues.
Alpha version (build 12) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b12.zip

[grendel25]

seuntjie, thanks again for replying.  My internet connection is stable and fast (50 Mb/s).  I'm not using a vpn.  JD works fine in v2.5 but I haven't been able to get it to work with any of the v3 versions and I've tried them all and I've tested on two different computers and with a VPN and without a VPN.  

PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions.  The nonce count is nice too.  Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.

No one else out there having problems connecting to JD in the v3 bot?  Is there debug I could run in programming mode to learn more about the issue?  Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall?  But... I'm pretty sure I tried disabling my firewall too.  idk, may try that again.

btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet.  I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again.  seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.

It's very odd that you can't connect to JD. Have you tried the latest build of the bot (build 12)? I recently updated the API the bot uses to connect to JD to make it a bit more stable, so maybe that works. And yes, the bot communicates on a fundamentally different way with the sites in v3 from v2, but it still uses https, it won't get blocked by your firewall as long as you can browse the internet. Unfortunately there is no debug you can run at this time.

The only issue I can think of is that it for some odd reason tries to connect to doge-dice instead of JD, but you would need to have changed some of the code for that to happen. If you haven't yet, try build 12 and see if that works better. I'm sorry you're having these issues.
Alpha version (build 12) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b12.zip

Hi again.  Yes, I've been trying mostly build 12 and most recently build 12 but have also tried various v3 builds.  What is Doge-Dice?  Doge-Dice is not an option in the build12 that I have and I just downloaded it from the link you provided.  I have not changed any of the code.  But I have tried this:  

I just downloaded build12 into a completely neutral environment (VPS) and tried it again and it gave the exact same results as what I see on my two local home computers.  So maybe the fact that I don't see "Doge-Dice" in the version I'm running is a problem?  Did the wrong file get uploaded?  Thanks again for trying.

edit:  I just double-checked the "about" from the B12 I  just DL'd and it says  "vs 3.0 Alpha build 12"  so that seems like it would be the latest correct version.

edit:  It finally worked!!!   I don't know what happened... just started working.  OMG  yay!!!   sorry about all that.  Thx!!!

edit: Okay, so the issue was with the account.  I just transferred balance to a new account and it works fine

[seuntjie]

Glad you got it working. Sorry I couldn't help you more, I have no idea why your one account didn't work.

[grendel25]

Glad you got it working. Sorry I couldn't help you more, I have no idea why your one account didn't work.

It's something glitchy and it happened on a few different accounts.  Not sure if it's how I set it up or when I started using it or what but once it's glitched I just had to ditch the account.

I have more questions:

1.  Is it possible to reduce the amount of CPU usage consumed by the bot?

2.  Is it possible to reduce the amount of bandwidth consumed while using the bot?  

The internet Nazis where I live have a terrible idea of what 'normal' bandwidth is and crunch us down to 150 gigs per month for $85.  So, I actually put the bot on a VPS and it ran okay there but the CPU usage is over 50% so I couldn't run more than one bot without it getting hectic and even crashing sometimes.

edit: when running on PD it's consuming close to 1GB of data per day.

[seuntjie]

Glad you got it working. Sorry I couldn't help you more, I have no idea why your one account didn't work.

It's something glitchy and it happened on a few different accounts.  Not sure if it's how I set it up or when I started using it or what but once it's glitched I just had to ditch the account.

I have more questions:

1.  Is it possible to reduce the amount of CPU usage consumed by the bot?

2.  Is it possible to reduce the amount of bandwidth consumed while using the bot?  

The internet Nazis where I live have a terrible idea of what 'normal' bandwidth is and crunch us down to 150 gigs per month for $85.  So, I actually put the bot on a VPS and it ran okay there but the CPU usage is over 50% so I couldn't run more than one bot without it getting hectic and even crashing sometimes.

edit: when running on PD it's consuming close to 1GB of data per day.

It might be something to do with your password. If you have any non utf-8 characters in your password, you won't be able to log in with the bot.

as for your questions:

1. I tested cpu usage and the highest cpu usage I got was 2% at PRC. PD was around 1.5% and JD was just below 1%. Most of the time is spent waiting for a response from the server. Of course a higher betting speed means higher cpu usage, but I cant see it going above about 2.5%.

2. Bet less or reduce the betting speed using the bot speed setting. The bot communicates purely in post data and json with the sites, so no, there's no way to reduce the data usage. The bot sends and receives data constantly while betting, it's almost like downloading a file.
2.1: You can edit the source and disable the chat at primedice. That should reduce data consumption somewhat

If you run more than one instance from the same directory, it's likely the bot will crash. Both bots will try to write to and read from the same database file for the bets, and that could cause some issues. It's more likely that this is causing the bots to crash than the cpu usage.

[suresh1818]

HI , am using the bot 1st time at justdice, but few questions for settings

1) In the picture given in forum its showing bets on DOGE but when i open it , in actually its showing CLAM how to play the bot with DOGE

2) How to change the payout 1.98x to 2.00x or higher , reason being when making losses its 100% but when profit loosing 0.02% so ultimately its not covering the loss made .

3) so if my total bets are 4000 and i made profit 1500 bets and lost 2500 bets , then  am earning nothing .

Kindly correct me if am wrong and if any one can help me with guidelines for best settings to maximize the profit.

[seuntjie]

HI , am using the bot 1st time at justdice, but few questions for settings

1) In the picture given in forum its showing bets on DOGE but when i open it , in actually its showing CLAM how to play the bot with DOGE

2) How to change the payout 1.98x to 2.00x or higher , reason being when making losses its 100% but when profit loosing 0.02% so ultimately its not covering the loss made .

3) so if my total bets are 4000 and i made profit 1500 bets and lost 2500 bets , then  am earning nothing .

Kindly correct me if am wrong and if any one can help me with guidelines for best settings to maximize the profit.

1) The picture on the forum is about a year old and was made when doge-dice was still active. You can't play in doge on just-dice. Also, the version that resembles that picture is nearly 6 months old. You should try the newer version. See below for a link

2) set your chance to the corresponding payout. for a 2x payout, your chance must be 49.5% to win. to calculate what your chance should be, take 99/payout. for example, for a 10x payout, your chance should be set to (99/10)=9.9%

3) this question doesn't make sense. I think you should read up on how the betting strategies work.

The best settings are what works best for you. There is no global best settings.

[seuntjie]

New alpha version released with support added for rollin.io and a log of bug fixes for dadice:

Alpha version (build 13) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b13.zip