GoldCoin™ (GLC) Thread - The Gold Standard of Digital Currency [OFFICIAL THREAD]

[hhs99]

I cant get the wallet to run on ubuntu 12.04 said error while loading shared libs libminiupnpc.so.5 cannot open shared object. I have the package installed but it still wont run

[1715682364]

1715682364

[1715682364]

1715682364

[1715682364]

1715682364

[1715682364]

1715682364

[MicroGuy]

Gave this a try and my first block find was rejected. I don't think your patch worked.

The patch does not take effect until block 103000. After that block, please allow a few hours for difficulty to normalize.

I cant get the wallet to run on ubuntu 12.04 said error while loading shared libs libminiupnpc.so.5 cannot open shared object. I have the package installed but it still wont run

Take a look here and see if this helps: https://www.gldtalk.org/index.php?topic=764.0

[ajqjjj]

103000 blocks before valid?

[MicroGuy]

What's up with so many updates via email?

This is to keep the community informed. There's an op-out link in the bottom of each message.

103000 blocks before valid?

The new code changes take effect after block 103000.

[infinitevs]

The new client is busted somewhat!

1. if you quit before half an hour is up since your last transaction.. you will lose all those transactions that happened in that time!
My Transactions just keep disappearing and there is no way to check or repair wallet!!

2. with connect= set and peer.dat removed the client still connects to other ips other than the ones listed in the conf

Please fix ASAP.

[akumaburn]

The new client is busted somewhat!

1. if you quit before half an hour is up since your last transaction.. you will lose all those transactions that happened in that time!
My Transactions just keep disappearing and there is no way to check or repair wallet!!

2. with connect= set and peer.dat removed the client still connects to other ips other than the ones listed in the conf

Please fix ASAP.

1. If your transactions are disappearing then you are likely on the wrong chain.

2. That's because irc seeds/dns seeds are on, if you want to use connect to connect to a specific chain you'll have to set dns=0 for dns related values.

[MicroGuy]

I just solved a block!

[infinitevs]

1. If your transactions are disappearing then you are likely on the wrong chain.

2. That's because irc seeds/dns seeds are on, if you want to use connect to connect to a specific chain you'll have to set dns=0 for dns related values.

Hi Akumaburn,

1. According to the blockchain explorer I am on the most recent chain this has happened on 2 seperate clients one that is newly installed and downloaded block chain and one that I redownloaded the block chain using the nodes on the website.

2. Could be that I messed Up.. will double check that [edited]

http://www.gldtalk.org/devteam/mined.png

I just solved a block!  

Hi Microguy,

I solved 10 blocks over the course of the morning 4 are still in my transaction list, the other 6 have disappeared and are no longer in the transaction list, additionally my client shows a count of 11 transactions but there are only 4 in the list :/

Would be cool to understand how and why this is happening?

[gjpminingco]

First Time Poster Here


DvCvJeZLoE2Krwc6puY6Z4zwDoQ5vumsoR

Do i still get my 100 GLD ??

[gjpminingco]

Ohh this Bites I found my First GLD block and it is Rejected




[2013-11-05 00:00:03] Rejected 002181fe Diff 1.96K/1004 BLOCK! GPU 0 pool 3


well that sucks, I guess i dont get that 45 GLD

[MicroGuy]

Hi Microguy,

I solved 10 blocks over the course of the morning 4 are still in my transaction list, the other 6 have disappeared and are no longer in the transaction list, additionally my client shows a count of 11 transactions but there are only 4 in the list :/

Would be cool to understand how and why this is happening?

What version are you running and does you block height match the explorer: http://gld.cryptocoinexplorer.com/

[gjpminingco]

LoL MicroGuy did you just send me 45 GLD???


I am running version v0.7.1.4-gcf3abdf39d-beta and the Height matches the BlockChain

[MicroGuy]

LoL MicroGuy did you just send me 45 GLD???

That's the least I could do!

I am running version v0.7.1.4-gcf3abdf39d-beta and the Height matches the BlockChain

It sounds like you're good then....things should get better tomorrow after the hard fork.

[meta.p02]

Code:

[2013-11-05 14:09:33] accepted: 0/1 (0.00%), 19.05 khash/s (booooo)

What could cause a block to be outright rejected by the client?

[ryen123]

Code:

[2013-11-05 14:09:33] accepted: 0/1 (0.00%), 19.05 khash/s (booooo)

What could cause a block to be outright rejected by the client?

See the log file, you might/should see this:

Code:

ERROR: 
 ProcessBlock() : Possible Multipeer 51 percent detected, initiating anti-legit-peerban defense! halting until valid block! This is normal.. 

ERROR: BitcoinMiner : ProcessBlock, block not accepted

[gjpminingco]

I am getting this alot in my log


BitcoinMiner:
proof-of-work found  
  hash: 0000000599c7ae0f5d6ef38db7e2830bb3e3819636ab793cc235e5de939a8275  
target: 00000041c3bb0000000000000000000000000000000000000000000000000000
CBlock(hash=64ec7c439d9b3ca767df, PoW=0000000599c7ae0f5d6e, ver=1, hashPrevBlock=a8fb967faba25f8876a2, hashMerkleRoot=37eb25c7b9, nTime=1383638422, nBits=1d41c3bb, nNonce=3086554368, vtx=1)
  CTransaction(hash=37eb25c7b9, ver=1, vin.size=1, vout.size=1, nLockTime=0)
    CTxIn(COutPoint(0000000000, -1), coinbase 0496a578520179062f503253482f)
    CTxOut(nValue=45.00000000, scriptPubKey=02f5531a3889d17f8f9798cd3f42fd)
  vMerkleTree: 37eb25c7b9
generated 45.00
keypool keep 8
ERROR:
 ProcessBlock() : Possible Multipeer 51 percent detected, initiating anti-legit-peerban defense! halting until valid block! This is normal..

ERROR: BitcoinMiner : ProcessBlock, block not accepted


and these



getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500

[infinitevs]

What version are you running and does you block height match the explorer: http://gld.cryptocoinexplorer.com/

Yep same block height both clients are showing 102951 and the block explorer is also showing 102951, using version: "v0.7.1.4-gcf3abdf39d-beta"

{
"version" : 70104,
"protocolversion" : 60011,
"walletversion" : 60000,
"balance" : x,
"blocks" : 102916,
"connections" : 4,
"proxy" : "",
"difficulty" : 0.01506741,
"testnet" : false,
"keypoololdest" : 1383624534,
"keypoolsize" : 101,
"paytxfee" : 0.01000010,
"mininput" : 0.00010000,
"errors" : ""
}

1. According to the blockchain explorer I am on the most recent chain this has happened on 2 seperate clients one that is newly installed and downloaded block chain and one that I redownloaded the block chain using the nodes on the website.

Just watched a further 4 mining transactions that were approved half an hour ago and had 3 and 4 confirmations respectively revert back to 0 confirms, and become ? in the transactions list, though one block mined 10 mins before this still remain.. also this time the actual transactions didn't disappear.. well not yet.. if I exit the client they may...

[edit] yep they disappeared upon exiting and re-opening the client [/edit]



Please let me know if there is any reason as to why this would happen and why they would stop showing in the qt transaction log.

[zax983]

For last few days I have just 1 orphan and 144 rejected. Every time when you make new vertion I upgrade, but last time song like completly not work... Oh no, it's work: just few stales forr last few mins : ]

I try solo and pools, too. But can't find any working pool, so I continue to try solo right now.

DwyEN3GAvpzjVm2J7pZtgUJavsMHd1TguY

You can send me any coins, to be sure if my client is up to date or not. Thanks 

[zax983]

And what after block 103000, still not work...

[maxi75]

Same here
Solo mining

BitcoinMiner:
proof-of-work found 
  hash: 0000000d7ed3ad78b62cac606d9eb698947240ae75d1b6600c4c90c7554235e2 
target: 00000042d1ae0000000000000000000000000000000000000000000000000000
CBlock(hash=3e9d4732eac7a98b54b9, PoW=0000000d7ed3ad78b62c, ver=1, hashPrevBlock=b032cb3d36ec3d9ca19e, hashMerkleRoot=9793476feb, nTime=1383652239, nBits=1d42d1ae, nNonce=3049788160, vtx=1)
  CTransaction(hash=9793476feb, ver=1, vin.size=1, vout.size=1, nLockTime=0)
    CTxIn(COutPoint(0000000000, -1), coinbase 048fdb78520106062f503253482f)
    CTxOut(nValue=45.00000000, scriptPubKey=035f8c6dc72bda46db9e2e7e414059)
  vMerkleTree: 9793476feb
generated 45.00
ERROR:
 ProcessBlock() : Possible Multipeer 51 percent detected, initiating anti-legit-peerban defense! halting until valid block! This is normal..

ERROR: BitcoinMiner : ProcessBlock, block not accepted

Got 0 accepted and 35 rejected

{
"version" : 70104,
"protocolversion" : 60011,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 103007,
"connections" : 10,
"proxy" : "",
"difficulty" : 0.01496556,
"testnet" : false,
"keypoololdest" : 1383584625,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00010000,
"errors" : ""
}