[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside!

[BitSoftGeek]

Dear friends and comunity memmbers,
Miningpoolhub's latest updates caused zFastminer to slow down due to the change in the initial difficulty from 5 to 30.
This change brought a lot of luck to the pool and we welcome that
Before we release a new updated version, please use another miner (like coolminer or ccminer...)

Happy Mining
zFastminer team.

_______________________________________________________________________________ _______________


[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****


Update Jun 22th: New Version Release: zFastminer-v2.3.4

Dear friends and community memmbers,
This new update is highly recommended, we advise you all to update to zFastminer-v234 for Reduced Dev Fee 1.0%,
Nvidia Maxwell support(sm_52) and better stability.

Changelog:

• Dev Fee reduced to 1.0%.
• Added Nvidia Maxwell(sm_52) support.
• Removed the min number of GPU's, Now can run on 1 Gpu too.
• Bug Fixes for better stability.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.0%).

Download zFastminer-v2.3.4

Code:

https://file.fm/f/r3sym389

HAPPY MINING
zFastminer team.


_____________________________________________________________________


Update May 22th: New Version Release: zFastminer-v2.3.3

Dear friends and community memmbers,
This new update is highly recommended, we advise you to update to zFastminer-v233 for better speed (Miner & Pool), better stability and less power spikes...

Changelog:

• Improved kernel ~+5% speed improvement from previews version (v2.3.2)
• Miner can display now if blocks found - "...SharesAccepted:(6543/6543), BlocksFound:(1)..."
• MaxNonces found per kernel launch increased up-to 3 Nonces(work->nonces[2]).
• We reduced waiting time for our optimization to apply on miner launch.
• Another attempt to reduce power spikes from previous version.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 7~15 minute after program start to avoid disabling our miner Fee (1.8%).


_____________________________________________________________________


Update May 4th: Updated Version Release: zFastminer-v2.3.2

Changelog:

• Fixed Stratum connection Bug.
• Added support for IP addresses as URL- please choose the best IP for you with the lowest ping.
• Attempt to reduce power spikes.
• Mining Rigs with less then 2 GPU's not Supported.
• Max GPU's support increased to 19 per Rig.
• '--hide-diff' is ON by default to reduce CPU usage.
• Small Reduction of the Intensity for better stability.
• Compiled with Cuda 9.2

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Regarding power spikes:
We have looked about this issue with ccminer and found out that some users found solution by using '-plimit' option to limit the max power usage of the GPU's(in addition to MSI afterburner), you can set values per GPU like this:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q -plimit 60,60,60,60,60,60,60,60

This sets 60% power limit for each GPU on a rig with 8 GPU's, try this option with your preferred power percentage

Regarding MPH ongoing maintenance and stratum connection issues:
We enabled using IP address as URL and now you can choose the best IP address with the lowest ping for you and you shouldn't have connection problem anymore.
For example:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://139.162.132.70:20581 -u USERNAME.NewWORKERNAME -p x -q

List of IP addresses:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

How to Test Ping?:
Open command prompt/PowerShell and type:

Code:

ping us-east.lyra2z-hub.miningpoolhub.com

And you will see something like that:

Code:

Pinging us-east.lyra2z-hub.miningpoolhub.com [139.162.132.70] with 32 bytes of data:
Reply from 139.162.132.70: bytes=32 time=68ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55
Reply from 139.162.132.70: bytes=32 time=63ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55

ping europe.lyra2z-hub.miningpoolhub.com
Pinging europe.lyra2z-hub.miningpoolhub.com [139.162.46.14] with 32 bytes of data:
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=423ms TTL=51
Reply from 139.162.46.14: bytes=32 time=426ms TTL=51

Keep trying different IP's or URL's MPH URL's or choose from this list and test the ping:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

us-east.lyra2z-hub.miningpoolhub.com  
europe.lyra2z-hub.miningpoolhub.com
asia.lyra2z-hub.miningpoolhub.com
Until you find best IP address with the lowest ping and then use it in your .bat file.
_____________________________________________________________________


Update April 26th: Updated Version Release: zFastminer-v2.3.0

Changelog:

• Compiled with Cuda 9.2
• Small changes to kernel +2% ~ +5% speed improvement from previews version (v2.2.9)
• Mining Rigs with less then 3 GPU's not Supported

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Start.bat example:
zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q
zFastminer-v230 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q
zFastminer-v230 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q

______________________________________________________________________

Update April 19th: Updated Version Release: zFastminer-v2.2.9

Changelog:

Miner Fee reduced to 1.8%.
Small changes to kernel + Second Nonce is working now, while not using quiet option "-q" you gonna see message like this when Second Nonce found:"GPU #6: Found second Nonce: c1fa0d6f!"
Around 5% speed improvement on poolside.

zFastminer-v2.2.9 Most Powerful And Profitable Zcoin Miner For NVIDIA GPUs At This Time. TESTED AND VERIFIED!
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Please mine only with full Rigs - (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.
Use New WORKERNAME for this miner to fix rejected shares error.
______________________________________________________________________

Update April 14th: Updated Version Release: zFastminer-V2.2.85

Minor bug fixes - please mine only with full Rigs (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.

zFastminer-V2.2.85 Most Powerful And Profitable Zcoin Miner For NVIDIA GPUs At This Time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
Please use New WORKERNAME for this miner to fix rejected shares error.
_____________________________________________________________________

Update April 10th: Updated version release: zFastminer-V2.2.8

Added support for GTX 1060 3GB/6GB - please test only with full Rigs (single 1060 isn't fast enough) to get best result.
Fixed "JSON decode failed(-1)"
Minor bug fixes
Quiet mode set to OFF by default, for cleaner stats display please use '-q' option at .bat file

zFastminer-V2.2.8 Most profitable Zcoin miner for NVIDIA GPUs at this time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
_____________________________________________________________________

Update April 7th:
Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Please keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
_____________________________________________________________________

Update April 7th:
Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Please keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
_____________________________________________________________________

Update April 5th Updated version release: zFastminer-V2.2.6

Increased reported speed on pool
Added Volta SM_70 support
Miner Fee set to 2%
Minor bug fixes
Quiet mode set to ON by default for cleaner stats, use '-q' if you want to disable it
_____________________________________________________________________

[ANN] April 04, 2018

Dear Friends,
We are exited to announce our best Zcoin mining software for Rigs - zFastminer Version 2.2.6.
zFastminer has a highest hashrate on a poolside and optimized only for MiningPoolHub.
zFastminer works with nVidia Pascal/Volta GPUs with SM count >= 15.

Tested on Rigs with:
GTX 1070
GTX 1070 TI
GTX 1080
GTX 1080 TI - (8 GPU Rig Reports 33Mhs~48Mhs minimum on poolside on 24hr Graph)

Compiled with Cuda 9.1 (3rd patch) and SM 6.1(Pascal and Never GPUs, Please use current NVIDIA drivers with cuda 9.1 support).
Rigs with ~8 GPUS shows the best results!!!.

Important!!!
zFastminer will automatically calculate the best Intensity for each GPU based on it's SM count.
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee.
With zFastminer you should expect + 25%~35% increase in reported hash rate on poolside (MiningPoolHub).

Update:
Please use New WORKERNAME for this miner to fix rejected shares error.
_____________________________________________________________________


Downloads:

Download zFastminer-v2.3.4

Code:

https://file.fm/f/r3sym389

Download zFastminer-v2.3.3

Code:

https://file.fm/f/b7dwr5vw

Download zFastminer-v2.3.2

Code:

https://file.fm/f/dgqq53yn

Download zFastminer-v2.3.0

Code:

https://file.fm/f/5f9tmcwx

Download zFastminer-v2.2.9

Code:

https://file.fm/f/vnce927k

Download zFastminer-V2.2.85

Code:

https://file.fm/f/kevswzg2

Download zFastminer-V2.2.8

Code:

https://file.fm/f/fbbwb5rp

Download zFastminer-V2.2.6

Code:

https://files.fm/f/wwk3t8jg

Happy mining from our zFastminer team

[1715422185]

1715422185

[1715422185]

1715422185

[1715422185]

1715422185

[1715422185]

1715422185

[1715422185]

1715422185

[EdgeOfSanity]

will this work on other lyra2z shitcoins or is it strictly for xzc?

What is the fee %?

Also, i'll let others test this software first. Don't believe for a second this isn't malware until proven otherwise.

[Gongolo]

Why only MPH?
Is it a lyra2z miner or a MPH-XZC miner?

[BitSoftGeek]

will this work on other lyra2z shitcoins or is it strictly for xzc?
What is the fee %?
Also, i'll let others test this software first. Don't believe for a second this isn't malware until proven otherwise.

This version is limited to MiningPoolHub so it's indeed only for Zcoin,
if there will be other important lyra2z coin we will consider another version to support it.

happy mining

Best Regards,
zFastminer team.

[p33k]

will this work on other lyra2z shitcoins or is it strictly for xzc?

What is the fee %?

Also, i'll let others test this software first. Don't believe for a second this isn't malware until proven otherwise.

This version is limited to MiningPoolHub so it's indeed only for Zcoin,
if there will be other important lyra2z coin we will consider another version to support it.

happy mining

I still don't see what the fee % is...

[BitSoftGeek]

I still don't see what the fee % is...

The miner fee is not an issue since your net income should increase by at least 20% compared to public lyra2z miners  currently available.
The Fee amount will decrease with each new Release relative to comunity interest, it's just for helping us keep the development live and to contenue Optimizing zFastminer and other Algos too.
When you find great deal on product that is 20%~30% lower then the current market price, are you gonna cancel your order just because the retailer will not say to you what his commission rate on the purchase - do you?

We continue our work on this project and we will share with you any further improvement that we can achieve...
At this stage, the fee will help us to continue to support the improvement of the software, but even at this moment, Zcoin is the most profitable coin for mining with NVIDIA cards that we mentioned with our zFastminer...

Thanks' to everyone who started mining with our zFastminer software.
Follow this thread for updates about further improvements very soon ...

Hope you also will join our zFastminer software and enjoy it...

Best Regards,
zFastminer team.

[crypt0.zone]

Hello, do you plan to release linux version? it would be probably included in all linux distros for mining and made miner more popular!

[banec]

GPU's with Less then 15 SM not supported!

?
1063 (drv 391.01 win 10)

[konqueror]

What about linux version?

[BitSoftGeek]

Hello, do you plan to release linux version? it would be probably included in all linux distros for mining and made miner more popular!

It's in our "To Do" list.

GPU's with Less then 15 SM not supported!

?
1063 (drv 391.01 win 10)

1060 is not supported, GTX 1070 (15 SM) and its Mining models is the minimum requirement.
https://www.techpowerup.com/gpudb/2840/geforce-gtx-1070

Best Regards,
zFastminer team.

[rusty91]

linux alone has around 5 to 10% advantage over windows... (based on my own experience with 1080TIs)
testing on zFastminer on Win is giving me now 660+ kH/s advantage over ccminer (@win) 1080TI with 2000MHz clock, which is nice... Let's see what does the miningpoolhub say (in few hours).

[mcetin35]

I still don't see what the fee % is...

The miner fee is not an issue since your net income should increase by at least 20% compared to public lyra2z miners  currently available.
The Fee amount will decrease with each new Release relative to comunity interest, it's just for helping us keep the development live and to contenue Optimizing zFastminer and other Algos too.
When you find great deal on product that is 20%~30% lower then the current market price, are you gonna cancel your order just because the retailer will not say to you what his commission rate on the purchase - do you?

We continue our work on this project and we will share with you any further improvement that we can achieve...
At this stage, the fee will help us to continue to support the improvement of the software, but even at this moment, Zcoin is the most profitable coin for mining with NVIDIA cards that we mentioned with our zFastminer...

Thanks' to everyone who started mining with our zFastminer software.
Follow this thread for updates about further improvements very soon ...

Hope you also will join our zFastminer software and enjoy it...

If that +20% goes to developer, than there is no point to use it.. you guys should implement the exact number here.

[BitSoftGeek]

Please read carefully what I have wrote:

your net income should increase by at least 20%

This reffers to the actual avarege reported hashrate on your pool side, not just the speed you see in the miner.
Feel free to test  and report back after 24hr how our miner compares against other miners, we are sure you going to be pleased.
 
Best Regards,
zFastminer team.

[St.Neman]

something is wrong with miner?
3x1080 ti rig on Miningpoolhub.com about 1 hour
to much rejected, invalid round shares

https://i.imgur.com/YlhdroZ.png

[rusty91]

custom intensity? 

[BitSoftGeek]

something is wrong with miner?
3x1080 ti rig on Miningpoolhub.com about 1 hour
to much rejected, invalid round shares

Thank you for your feedback.
I have just checked our Rigs, all seem ok, But I have seen this behavior on the last days, (MPH is under attack?) on some coins- maybe this the coz?

The solution that we found was to simply add new ".WORKERNAME" and point the miner to this new worker.
So just do the following and tells us if the problem gone:
Change this :
-u USERNAME.OldWorkerName
with your NewWorkerName
-u USERNAME.NewWorkerName

Best Regards,
zFastminer team.

[St.Neman]

something is wrong with miner?
3x1080 ti rig on Miningpoolhub.com about 1 hour
to much rejected, invalid round shares

Thank you for your feedback.
I have just checked our Rigs, all seem ok, But I have seen this behavior on the last days, (MPH is under attack?) on some coins- maybe this the coz?

The solution that we found was to simply add new ".WORKERNAME" and point the miner to this new worker.
So just do the following and tells us if the problem gone:
Change this :
-u USERNAME.OldWorkerName
with your NewWorkerName
-u USERNAME.NewWorkerName

Best Regards,

zFastminer team.

Done!
I will tell you soon
Thanks for quick response

Best regards !

[map_ua]

MPH is constantly stealing our coins. Why do you do miner for this pool? can you make it for our pool? bsod.pw

[greml]

Please read carefully what I have wrote:

your net income should increase by at least 20%

This reffers to the actual avarege reported hashrate on your pool side, not just the speed you see in the miner.

Feel free to test  and report back after 24hr how our miner compares against other miners, we are sure you going to be pleased.
 
Best Regards,

zFastminer team.

Instead of writing a dozen posts with vague statements you just could say what the miner fee is.
People wanna know that and if you avoid to answer this, people won't trust you.

[DES_MX]

Tried this miner on overclocked titan Xp's rig, while it does perform ~600kh better per card, achieving 3800khash per card (21% better than other miners), it's nowhere near the stated33-39mhash per 8 Ti's (4500khash average).

This is in miner by the way. Pool didn't show boost after 2.5 hours running. Also seeing that the OP won't tell the fee, which leads to believe it is draconic, can't recommend right now