BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 09, 2018, 08:01:48 PM Last edit: April 10, 2018, 06:31:44 AM by BitSoftGeek |
|
if you need some help to testing linux version you are more than welcome to send me PM... i have rigs with 1060 too...
Dear DonMaxim , We are happy to hear that, thank you Best Regards, zFastminer team. When I assume the optimization happens, I get JSON decode failed(-1):wrong arguments. happened about 15 min in on one rig and about 30 min on the other. then continues to mine at same speed. and keeps saying Json decode failed every so often. Happening on 1080ti and 1080 rigs.
For what mention here ... i think is some problem .. u have to check out a bit i did saw the above of ur reply on it .. out of 40-45 rig i run thru it i find out .. 1 of them totally cant run .. whenever it run it shut down i not sure what is the really problem .. but no problem running ccminer 2.2.5 .. and with the json error .. is more of a problem i find out of them if the gpu have no problem handling it .. it can give u a high speed .. let say 1 line of hash 1 line of json error but i did found when there is like 4 or 5 line of json error .. meaning it doesnt kick in on the right time the hash is so much lower .. but usual one have not much problem ..
lastly i find it will run into error every 1-2 day so .. have to check on it quite often ..
yvmen
Dear yvmen, We just finished working on fixed version and testing it now, we are planning to release it in a few hours, Best Regards, zFastminer team.
|
|
|
|
|
|
|
The forum strives to allow free discussion of any ideas. All policies are built around this principle. This doesn't mean you can post garbage, though: posts should actually contain ideas, and these ideas should be argued reasonably.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 09, 2018, 10:45:33 PM |
|
Update April 10th: Updated version release: zFastminer-V2.2.8
- Added support for GTX 1060 3GB/6GB - please test only with full Rigs (single 1060 isn't fast enough) to get best result.
- Fixed "JSON decode failed(-1)"
- Minor bug fixes
- Quiet mode set to OFF by default, for cleaner stats display please use '-q' option at .bat file
zFastminer-V2.2.8 Most profitable miner for NVIDIA GPUs at this time. TESTED AND VERIFIED! The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
Download zFastminer-V2.2.8 link:
https://file.fm/f/fbbwb5rp HAPPY MINING zFastminer team.
|
|
|
|
anatolikostis
Legendary
Offline
Activity: 2026
Merit: 1005
|
|
April 10, 2018, 07:49:05 AM |
|
not working - win7 x64 geforce 391.24 4*1080ti completely untested miner
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 10, 2018, 08:16:21 AM |
|
not working - win7 x64 geforce 391.24 4*1080ti completely untested miner
Dear anatolikostis ,We are sorry to hear that, unfortunetlly we don't have rigs with WIN 7 to test, could you please share the .bat you are using (without the -u name.) Best Regards, zFastminer team.
|
|
|
|
cida
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 10, 2018, 09:14:25 AM |
|
Not working for me too. 4x 1070 - Win 10 1709 - Nvidia driver 391.35 command line: zFastminer-v228.exe -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u ***.**** -p x -q Always abort after few moments with following output: *** zFastminer V2.2.8: Lyra2Z miner for nVidia Pascal GPUs - Optimized for MiningPoolHub.com ***
Please consider making a donation to the following addresses: BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot) BTC donation address: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (djm34)
This miner is optimized for Mining Rigs with more then 3 GPU's minimum Thanks for supporting this project!
[2018-04-10 11:11:30] Starting on stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 [2018-04-10 11:11:30] 4 miner threads started, using 'lyra2z' algorithm. [2018-04-10 11:11:31] GPU #2: Intensity Calculated Based on 15 SM (streaming multiprocessor) Cuda error in func 'scanhash_lyra2Z' at line 93 : unspecified launch failure. [2018-04-10 11:11:31] GPU #1: Intensity Calculated Based on 15 SM (streaming multiprocessor) Cuda error in func 'scanhash_lyra2Z' at line 93 : unspecified launch failure. [2018-04-10 11:11:31] GPU #3: Intensity Calculated Based on 15 SM (streaming multiprocessor)
Hope this can help you.
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 10, 2018, 11:28:47 AM Last edit: April 14, 2018, 04:40:49 PM by BitSoftGeek |
|
Dear cida ,We are sorry to hear that, Did you overclocked the cards? if so please try to run without OC and see if it helps. If not, you can try this version that we think may solve the problem and please report back. zFastminer-V2285https://file.fm/f/kevswzg2Please update the .bat file: zFastminer-V2285 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q We got Rigs with 1070/1070TI/1080Ti with win10 and latest NVIDIA drivers and we are testing on them before release, we did not encountered this problem with our 1070 rig. Best Regards, zFastminer team.
|
|
|
|
crocozino
|
|
April 11, 2018, 10:43:13 AM |
|
so if I understood this right, this miner will work on minigpoolhub only? other coins and other pools is not possible to mine with this miner? or possible? please let me know
|
|
|
|
cida
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 11, 2018, 01:25:30 PM |
|
Dear cida ,We are sorry to hear that, Did you overclocked the cards? if so please try to run without OC and see if it helps. If not, you can try this version that we think may solve the problem and please report back. zFastminer-V2285https://file.fm/f/pdt2g5dcPlease update the .bat file: zFastminer-V2285 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q We got Rigs with 1070/1070TI/1080Ti with win10 and latest NVIDIA drivers and we are testing on them before release, we did not encountered this problem with our 1070 rig. Best Regards, zFastminer team. Thanks for your quick response.
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 11, 2018, 04:03:28 PM |
|
so if I understood this right, this miner will work on minigpoolhub only? other coins and other pools is not possible to mine with this miner? or possible? please let me know
Dear crocozino,Yes, you are right, zFastminer only supports mining Lyra2z(Zcoin) on Miningpoolhub only. Best Regards, zFastminer team.
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
April 11, 2018, 09:54:31 PM |
|
Dear cida ,We are sorry to hear that, Did you overclocked the cards? if so please try to run without OC and see if it helps. If not, you can try this version that we think may solve the problem and please report back. zFastminer-V2285https://file.fm/f/pdt2g5dcPlease update the .bat file: zFastminer-V2285 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q We got Rigs with 1070/1070TI/1080Ti with win10 and latest NVIDIA drivers and we are testing on them before release, we did not encountered this problem with our 1070 rig. Best Regards, zFastminer team. whats the difference between the 2.2.8.5 and the 2.2.8 in the first post? thanks Marco
|
|
|
|
hyper33
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 12, 2018, 02:25:52 AM |
|
Hello
Miner works great!
Would you consider making the miner work on f2pool and zpool? I've had more consitent profit on f2pool. Seems like miningpoolhub luck is always lower and yields less coins than f2pool? Zpool also has criptoreal which is also lyra2z.
thanks
|
|
|
|
zot57
Newbie
Offline
Activity: 165
Merit: 0
|
|
April 12, 2018, 06:31:21 AM |
|
What about AMD cards, when you will have miner for them? I have more AMD's than NVIDIA, I would like to use those cards.
|
|
|
|
n00bmin3r
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 12, 2018, 08:19:29 AM Last edit: April 12, 2018, 08:38:29 AM by n00bmin3r |
|
rigs tested for this miner, all running latest nvidia drivers, windows 10, no overclocks, all running stock settings
rig 1 (1070 x 6): working flawlessly!
rig 2 (1060 x 5, 1070ti x 1): rig crashes once a day, other than that no issues since i set the bat file to autostart on startup.
rig 3 (1070 x 2, 1070ti x 3, 1080ti x 1): blue screens immediately, video_TDR_Failure. Already removed old drivers using DDU and reinstalled latest drivers, still can't get it to work.
anybody else tested this miner on a multi gpu rig? i'm thinking that might be the issue.
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 12, 2018, 10:16:51 AM Last edit: April 14, 2018, 04:41:38 PM by BitSoftGeek |
|
rigs tested for this miner, all running latest nvidia drivers, windows 10, no overclocks, all running stock settings rig 1 (1070 x 6): working flawlessly! rig 2 (1060 x 5, 1070ti x 1): rig crashes once a day, other than that no issues since i set the bat file to autostart on startup. rig 3 (1070 x 2, 1070ti x 3, 1080ti x 1): blue screens immediately, video_TDR_Failure. Already removed old drivers using DDU and reinstalled latest drivers, still can't get it to work. anybody else tested this miner on a multi gpu rig? i'm thinking that might be the issue.
Dear n00bmin3r,We are sorry to hear that, unfortunetlly we don't have rigs with 3 different GPUs tested, could you please share the .bat you are using (without the -u name.) + which version of zfastminer is not working for you? did you tested zFastminer-V2285 ? If not, you can try this version that we think may solve the problem and please report back. zFastminer-V2285https://file.fm/f/kevswzg2Please update the .bat file: zFastminer-V2285 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q also try to open for each model separate program if you know that your 1080ti is gpu 7, than add to .bat file a new worker name and add -d 7 if your 1060 cards 1 2 3 4 5 - than make a new bat with new worker name and add -d 1,2,3,4,5 We got Rig with 6X1070 + 2X1080Ti with win10 - 8gb ram and latest NVIDIA drivers but we did not encountered this problem with this rig. Best Regards, zFastminer team.
|
|
|
|
Aculan
Newbie
Offline
Activity: 23
Merit: 0
|
|
April 12, 2018, 10:39:08 AM |
|
Hi, you made an excellent, fast miner. Everything works just fine. Thank you for your work. 2 days of tests on 3rigues. 1)(6x1080Ti - Palit GR) = 24.1 Mh/s 2025Mhz core/-504Mem 2)(3x1080Ti - Gagabyte) = 12.2 Mh/s 2025Mhz core/-504Mem 3)(2x1070+3x1063 - Palit GR & JS) = 8.2 Mh/s 2025Mhz core/-504mem - 1070 GR & 1991Mhz core/-504Mem - 1060 JS (When 2025mhz core the miner hung, after a while.) 1991mhz very good 2days Total = 45 Mh/s shows the miner, but the pool shows 45-60 Mh/s I get = 0.88-0.92 XZC per day from these rigs. GOOD JOB
|
|
|
|
majonezas
Newbie
Offline
Activity: 36
Merit: 0
|
|
April 12, 2018, 01:02:39 PM |
|
2x 1070 + 1x 1070ti + 2x 1080 worked well from the start, but with a few random crashes. 12,5 mhs on miner and 9-30mhs on pool, from now on daily earnings are always higher than on whattomine, which was never possible before. thank you
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 12, 2018, 01:03:12 PM Last edit: April 12, 2018, 01:53:48 PM by BitSoftGeek |
|
whats the difference between the 2.2.8.5 and the 2.2.8 in the first post? thanks Marco
Dear principino1984,zFastminer-V228 & ...V2285 are same speed & same program with minor bug fixed on 2885... if V228 works for you, you don't have to use V2285... if for some reason the miner crash's on start so try the V2285 and report back the resoult please ... Happy mining Best Regards, zFastminer team. _____________________________________________________________________ Hello Miner works great!
Would you consider making the miner work on f2pool and zpool? I've had more consitent profit on f2pool. Seems like miningpoolhub luck is always lower and yields less coins than f2pool? Zpool also has criptoreal which is also lyra2z. thanks
Dear hyper33 Thank you for your feedback, much appreciated!. It's in our "To Do" list. Please follow the updates on this thread. Best Regards, zFastminer team. ____________________________________________ Hi, you made an excellent, fast miner. Everything works just fine. Thank you for your work. 2 days of tests on 3rigues. 1)(6x1080Ti - Palit GR) = 24.1 Mh/s 2025Mhz core/-504Mem 2)(3x1080Ti - Gagabyte) = 12.2 Mh/s 2025Mhz core/-504Mem 3)(2x1070+3x1063 - Palit GR & JS) = 8.2 Mh/s 2025Mhz core/-504mem - 1070 GR & 1991Mhz core/-504Mem - 1060 JS (When 2025mhz core the miner hung, after a while.) 1991mhz very good 2days Total = 45 Mh/s shows the miner, but the pool shows 45-60 Mh/s I get = 0.88-0.92 XZC per day from these rigs. GOOD JOB Dear Aculan,We are exited to read your comment, we worked very hard to bring the best Zcoin miner to this community, comments like yours gives us the positive energy to continue the hard work. Thank you!. Best Regards, zFastminer team.
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 12, 2018, 01:53:31 PM |
|
2x 1070 + 1x 1070ti + 2x 1080 worked well from the start, but with a few random crashes. 12,5 mhs on miner and 9-30mhs on pool, from now on daily earnings are always higher than on whattomine, which was never possible before. thank you Dear majonezas,It's not just a copy past, we are really exited to read your comment, we are really working very hard to bring the best Zcoin miner to this community, comments like yours really gives us the positive energy to continue the hard work. Can you try to see if one of the Gpu's core clock is boosting over 1999mhz and lower it down a little? Maybe this is causing the crashes like other member mentioned few comments above? Happy mining Best Regards, zFastminer team.
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
April 12, 2018, 01:56:02 PM |
|
I can confirm that 6x1080ti are working at 24.1 MH/s ... from 18.4 of the previous best miner! Tested on 3 rigs of Zotac Blowers, MSI Blower and MSI Armor (25MH/s).... Terrific job! http://www.xtremeshack.com/images/6EkLIu.jpgOne question, is it possible to have logs to use at best with Awesome Miner program? Otherwise I can't see if there's a problem etc etc. Thanks
|
|
|
|
BitSoftGeek (OP)
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 12, 2018, 02:39:24 PM |
|
I can confirm that 6x1080ti are working at 24.1 MH/s ... from 18.4 of the previous best miner! Tested on 3 rigs of Zotac Blowers, MSI Blower and MSI Armor (25MH/s).... Terrific job! http://www.xtremeshack.com/images/6EkLIu.jpgOne question, is it possible to have logs to use at best with Awesome Miner program? Otherwise I can't see if there's a problem etc etc. Thanks Dear principino1984Thank you for your feedback, much appreciated!. MPH will send to your email address notifications if some of your workers gose to IDLE, we don't support LOGS at this time ... Happy mining Best Regards, zFastminer team.
|
|
|
|
|