[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside!

[beepropolis]

All the sources can be found here:
https://github.com/tpruvot/ccminer

Feel Free to analyze/optimize/and analyze again and again until you will get the result you like  .
We are not selling it, just sharing our optimized version that work the best for us, Feel free to try and report or keep using the current  available miners, it a free world, the choise is yours :-).

Best Regards,

zFastminer team.

Please read https://github.com/tpruvot/ccminer/blob/windows/LICENSE.txt

TL;DR: You modify GPLv3 source - you are obliged to release the source of your work.

Windows defender keeps flagging as virus.
This GPL right? Can we request for your optimized source so we can verify and compile for ourselves?

Thanks.

[1714571207]

1714571207

[1714571207]

1714571207

[1714571207]

1714571207

[1714571207]

1714571207

[1714571207]

1714571207

[Dr_Victor]

All the sources can be found here:
https://github.com/tpruvot/ccminer

Feel Free to analyze/optimize/and analyze again and again until you will get the result you like  .
We are not selling it, just sharing our optimized version that work the best for us, Feel free to try and report or keep using the current  available miners, it a free world, the choise is yours :-).

Best Regards,

zFastminer team.

Please read https://github.com/tpruvot/ccminer/blob/windows/LICENSE.txt

TL;DR: You modify GPLv3 source - you are obliged to release the source of your work.

Windows defender keeps flagging as virus.
This GPL right? Can we request for your optimized source so we can verify and compile for ourselves?

Thanks.

Other words, can we get your good work for free?

[DonMaxim]

Is it possible to use this miner on other pools? or only on MiningPoolHub?

The advantage you get from the powred miner software are completely lost when you use MiningPoolHub. Always bad luck and lower profit than other pools...

I have compared my 48h profit on f2pool with a "normal" miner and on miningpoolhub using this miner (with higher hashrate) and at the end of the 48 hours my profit on f2pool was 17% higher than on MiningPoolHub.

From my point of view makes no sense using this powered software if it can be used only on MPH

Hi,
Can you share any screenshots of your tests?
I can only confirm that with my 7 rigs - 6x8x1080ti + 12x1080ti i got 5.19 xzc in last 24 hours,
It’s something like 4 usd per gpu, in my point of view your compares are not correct...
I will glad to see if you can share some screenshots, maybe i wrong...
Thanks

I've written a PM to ruplikminer, anyway... can we compare a few more days timespan? 7 days and 18x 1080ti I've made 11zcoin. Same results as you ... more or less 4USD per ti.

Marco

Hi marco,
In last 24 hours i got much more now with zfastminer-v2.3.0,
5.275 xzc with all my 60x1080ti,
Its now 4.07 per gpu,
People always like to complain only and most of them never like to say a simple word - “thank you”...
Most of complains comes from just opend accounts, not fair at all....
I like to mine lyra2z beqause of low electricity and less watts usage,
And zfastminer just gave me the best results,
So i am really like this miner and this coin,
I can only say, thank you dev for sharing it for us !!!!!
Max

[_Dr2]

I have two sets of minings rigs. One is 6x6x1080 and secound 10x6x1080. All GPU are overclocked.
Using ZFastminer, all rigs actualy mine with 18-19 MH/s on rig side and 22-24 MH (17$/d per rig) on pool side (depending on actual diff and pool luck).
I like lyra2z algo also because of low power consumption and low GPU temperature.
Thx dev for Your miner

[St.Neman]

Hi marco,
In last 24 hours i got much more now with zfastminer-v2.3.0,
5.275 xzc with all my 60x1080ti,
Its now 4.07 per gpu,
People always like to complain only and most of them never like to say a simple word - “thank you”...
Most of complains comes from just opend accounts, not fair at all....
I like to mine lyra2z beqause of low electricity and less watts usage,
And zfastminer just gave me the best results,
So i am really like this miner and this coin,
I can only say, thank you dev for sharing it for us !!!!!
Max

https://i.imgur.com/tMbit4G.jpg https://i.imgur.com/GtHSjlr.jpg

[Aculan]

Hi marco,
In last 24 hours i got much more now with zfastminer-v2.3.0,
5.275 xzc with all my 60x1080ti,
Its now 4.07 per gpu,
People always like to complain only and most of them never like to say a simple word - “thank you”...
Most of complains comes from just opend accounts, not fair at all....
I like to mine lyra2z beqause of low electricity and less watts usage,
And zfastminer just gave me the best results,
So i am really like this miner and this coin,
I can only say, thank you dev for sharing it for us !!!!!
Max

Hi, what are the overclocking parameters you use for 1080ti?

[davidsuswanto]

Is it possible to use this miner on other pools? or only on MiningPoolHub?

The advantage you get from the powred miner software are completely lost when you use MiningPoolHub. Always bad luck and lower profit than other pools...

I have compared my 48h profit on f2pool with a "normal" miner and on miningpoolhub using this miner (with higher hashrate) and at the end of the 48 hours my profit on f2pool was 17% higher than on MiningPoolHub.

From my point of view makes no sense using this powered software if it can be used only on MPH

Hi,
Can you share any screenshots of your tests?
I can only confirm that with my 7 rigs - 6x8x1080ti + 12x1080ti i got 5.19 xzc in last 24 hours,
It’s something like 4 usd per gpu, in my point of view your compares are not correct...
I will glad to see if you can share some screenshots, maybe i wrong...
Thanks

I've written a PM to ruplikminer, anyway... can we compare a few more days timespan? 7 days and 18x 1080ti I've made 11zcoin. Same results as you ... more or less 4USD per ti.

Marco

Hi marco,
In last 24 hours i got much more now with zfastminer-v2.3.0,
5.275 xzc with all my 60x1080ti,
Its now 4.07 per gpu,
People always like to complain only and most of them never like to say a simple word - “thank you”...
Most of complains comes from just opend accounts, not fair at all....
I like to mine lyra2z beqause of low electricity and less watts usage,
And zfastminer just gave me the best results,
So i am really like this miner and this coin,
I can only say, thank you dev for sharing it for us !!!!!
Max

what pool you mining in?
im mining in miningpoolhub so far from whattomine calculator show...
btw what OC setting for your 1080ti?

[DonMaxim]

Hi marco,
In last 24 hours i got much more now with zfastminer-v2.3.0,
5.275 xzc with all my 60x1080ti,
Its now 4.07 per gpu,
People always like to complain only and most of them never like to say a simple word - “thank you”...
Most of complains comes from just opend accounts, not fair at all....
I like to mine lyra2z beqause of low electricity and less watts usage,
And zfastminer just gave me the best results,
So i am really like this miner and this coin,
I can only say, thank you dev for sharing it for us !!!!!
Max

Hi, what are the overclocking parameters you use for 1080ti?

I am mining on MPH with zfastminer-v2.3.0
6x8x1080ti zotac amp extreme
Power 70
Core 0
Memory 0

12x1080ti zotac plower
With 2 miners opened with 6 gpu each
Power 70
Core 70
Memory 0

Max

[davidsuswanto]

Hi marco,
In last 24 hours i got much more now with zfastminer-v2.3.0,
5.275 xzc with all my 60x1080ti,
Its now 4.07 per gpu,
People always like to complain only and most of them never like to say a simple word - “thank you”...
Most of complains comes from just opend accounts, not fair at all....
I like to mine lyra2z beqause of low electricity and less watts usage,
And zfastminer just gave me the best results,
So i am really like this miner and this coin,
I can only say, thank you dev for sharing it for us !!!!!
Max

Hi, what are the overclocking parameters you use for 1080ti?

I am mining on MPH with zfastminer-v2.3.0
6x8x1080ti zotac amp extreme
Power 70
Core 0
Memory 0

12x1080ti zotac plower
With 2 miners opened with 6 gpu each
Power 70
Core 70
Memory 0

Max

how to install cuda 9.2? or i just installing the new Nvidia GeForce 397.31 and it will installing 9.2 cuda?

[Dr_Victor]

yes ^

[BitSoftGeek]

Hi Dev,
Thanks for such great fork but i've got some issue. Could you please help me solve it?

Image belong to my 18 gpu rig all of them p106-100 6GB
Has 160 GB page file 20 GB free space SSD
Latest driver of course (clean install)
Win 10 x64 latest
Slight OC
-
No problem on dstm claymore phoenix lolminer with this rig
No problem on 6 gpu rig (same gpu's other rig)
No problem on 12 gpu rig (same gpu's other rig)

Dear eruman34,
Thank you for your kind feedback, We appreciate it very much :-),
You can try running 9 Gpu's per miner and open 2 miners at same time with this .Bat file:

Code:

zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME_1  -p x -q  -d 0,1,2,3,4,5,6,7,8
zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME_2  -p x -q  -d 9,10,11,12,13,14,15,16,17

Please let us know if this fixed your problem.

Best Regards,
zFastminer team.

Dear Dev,

I tried and YES i think its solved and i appreciate your help but i think it lead to another issue.
If you check the image below you'll see gpu0 error is passed mining started with split new workers. But on the right side there is a problem.

https://pasteboard.co/HizXuAO.jpg

This problem causes last 2 gpu to work %50 load other 16 of them is just fine under %100 workload. I give a shot to default clocks-settings but no luck its not about oc problem.
I think its about something like ccminer might have supoort to max 16 gpu? If thats the case can you add this to new version? If not any other solutions maybe? (Except new mobo ^_^)

Thanks/BR

Dear eruman34,
We have compiled new version with support for Max 19 GPUs and sent you the Download link -Please check your Inbox.
Please let us know if this fixed your problem so we can release it for the forum .

Best Regards,
zFastminer team.

[eruman34]

Hi Dev,
Thanks for such great fork but i've got some issue. Could you please help me solve it?

Image belong to my 18 gpu rig all of them p106-100 6GB
Has 160 GB page file 20 GB free space SSD
Latest driver of course (clean install)
Win 10 x64 latest
Slight OC
-
No problem on dstm claymore phoenix lolminer with this rig
No problem on 6 gpu rig (same gpu's other rig)
No problem on 12 gpu rig (same gpu's other rig)

Dear eruman34,
Thank you for your kind feedback, We appreciate it very much :-),
You can try running 9 Gpu's per miner and open 2 miners at same time with this .Bat file:

Code:

zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME_1  -p x -q  -d 0,1,2,3,4,5,6,7,8
zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME_2  -p x -q  -d 9,10,11,12,13,14,15,16,17

Please let us know if this fixed your problem.

Best Regards,
zFastminer team.

Dear Dev,

I tried and YES i think its solved and i appreciate your help but i think it lead to another issue.
If you check the image below you'll see gpu0 error is passed mining started with split new workers. But on the right side there is a problem.

https://pasteboard.co/HizXuAO.jpg

This problem causes last 2 gpu to work %50 load other 16 of them is just fine under %100 workload. I give a shot to default clocks-settings but no luck its not about oc problem.
I think its about something like ccminer might have supoort to max 16 gpu? If thats the case can you add this to new version? If not any other solutions maybe? (Except new mobo ^_^)

Thanks/BR

Dear eruman34,
We have compiled new version with support for Max 19 GPUs and sent you the Download link -Please check your Inbox.
Please let us know if this fixed your problem so we can release it for the forum .

Best Regards,
zFastminer team.

Dear Dev,

I can confirm new version supports 18 gpu at least and solves the problem. 1 hour run no crash. All gpu's %100 workload. Before this version above 16 gpu's causes crash for second part miner due to half load.

Some other notes from my results,
Monitoring too many gpu's from ccminer causes cpu impact and miner crash. -q option that you gave me is real life saver.
After your fix for 18 gpu i merged the bat files again to one and now all OK from 1 bat file without crash. So above 16 gpu users dont have to split bats anymore.
All of my rigs uses zfastminer now without problem.

Thank you for such great miner and of course for your support, looking forward to your new releases.

Best Regards

Edit#1: 12 hours no crash

[boomboommin]

it`s very good, 2 days testings and wonderful results. thanks

[S_Natural]

My 1080ti rig crashed sometime with default and under clock. It had power spike and PSU turned off.
Can you enable option -i and let we chose intensity manually?

[beepropolis]

All the sources can be found here:
https://github.com/tpruvot/ccminer

Feel Free to analyze/optimize/and analyze again and again until you will get the result you like  .
We are not selling it, just sharing our optimized version that work the best for us, Feel free to try and report or keep using the current  available miners, it a free world, the choise is yours :-).

Best Regards,

zFastminer team.

Please read https://github.com/tpruvot/ccminer/blob/windows/LICENSE.txt

TL;DR: You modify GPLv3 source - you are obliged to release the source of your work.

Windows defender keeps flagging as virus.
This GPL right? Can we request for your optimized source so we can verify and compile for ourselves?

Thanks.

Other words, can we get your good work for free?

For free? What do you mean? They released it under GPL so I assume it is implied that they also provide the source code for free for whoever requests it. BTW they are providing the binary to the public free already, what is wrong whit wanting to compile it ourselves to make sure antivirus is indeed marking it as false positive?

[DonMaxim]

My 1080ti rig crashed sometime with default and under clock. It had power spike and PSU turned off.
Can you enable option -i and let we chose intensity manually?

Hi,
Please provide more information about your rig,
How many gpus you have in this rig
Which model is your gpus
What is your oc parameters
Cpu model, ram, virtual memory,
free space on hard drive,
What version of zfastminer you are using and i will try to help you ...
Max

[S_Natural]

My 1080ti rig crashed sometime with default and under clock. It had power spike and PSU turned off.
Can you enable option -i and let we chose intensity manually?

Hi,
Please provide more information about your rig,
How many gpus you have in this rig
Which model is your gpus
What is your oc parameters
Cpu model, ram, virtual memory,
free space on hard drive,
What version of zfastminer you are using and i will try to help you ...
Max

I have 6 rig 8x1080ti: 2 Rig Asus Trix, 2 Rig EVGA FTW3, 2 MSI Trio. The rig use dual PSU AX1200i, G4400, ram 4GB, Pagefile 64 GB, SSD 120 GB.
OS: Win 10, Driver: 397.31
MSI Aferburn: PL 55%, 0 core, 0 mem

I tested the 1st time with v2.2.9:
All rigs work well a few hours, then rigs down because the 2nd PSU down, I think because of power spike.

Test with v2.3.0: much better
All rigs work fine from beginning. But after 12 - 24 hours, some rigs down with the same problem. V2.3.0 much better for me, the longest rig last more than 24 hours. All rigs have random crash.

[DonMaxim]

My 1080ti rig crashed sometime with default and under clock. It had power spike and PSU turned off.
Can you enable option -i and let we chose intensity manually?

Hi,
Please provide more information about your rig,
How many gpus you have in this rig
Which model is your gpus
What is your oc parameters
Cpu model, ram, virtual memory,
free space on hard drive,
What version of zfastminer you are using and i will try to help you ...
Max

I have 6 rig 8x1080ti: 2 Rig Asus Trix, 2 Rig EVGA FTW3, 2 MSI Trio. The rig use dual PSU AX1200i, G4400, ram 4GB, Pagefile 64 GB, SSD 120 GB.
OS: Win 10, Driver: 397.31
MSI Aferburn: PL 55%, 0 core, 0 mem

I tested the 1st time with v2.2.9:
All rigs work well a few hours, then rigs down because the 2nd PSU down, I think because of power spike.

Test with v2.3.0: much better
All rigs work fine from beginning. But after 12 - 24 hours, some rigs down with the same problem. V2.3.0 much better for me, the longest rig last more than 24 hours. All rigs have random crash.

With my experience, you can make some changes:
Put pl to 70
Core 0
Mem 0
Free space on c - 20gb
For 6 gpu rig you don’t really need 64 pf, you can set it on 40gb
Try to control gpu temperature and work below 65 c...
Try to find why you have power spikes, it’s cannot be from the miner,
Beqause your cpu is not the perfect one, i will suggest you add —hide-diff in your but file and add also -q...
Hope it will fix your problem...
Max

[boomboommin]

There is an error "GPU are unavalaible or busy" if  reload miner, then must reload rig for resolve problem....

[DonMaxim]

There is an error "GPU are unavalaible or busy" if  reload miner, then must reload rig for resolve problem....

If you want to restart the program you should wait after closing it about 10sec and then reopen the miner...
7 rigs, 0 errors and 0 crashes, everything works just great 👍
Max