[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside!

[boomboommin]

There is an error "GPU are unavalaible or busy" if  reload miner, then must reload rig for resolve problem....

If you want to restart the program you should wait after closing it about 10sec and then reopen the miner...
7 rigs, 0 errors and 0 crashes, everything works just great 👍
Max

wait`s 1 minute last time. But it`s didn`t work. rebooting 20 seconds and no problem (4 rigs have)

[DonMaxim]

There is an error "GPU are unavalaible or busy" if  reload miner, then must reload rig for resolve problem....

If you want to restart the program you should wait after closing it about 10sec and then reopen the miner...
7 rigs, 0 errors and 0 crashes, everything works just great 👍
Max

wait`s 1 minute last time. But it`s didn`t work. rebooting 20 seconds and no problem (4 rigs have)

Ok bro,
I think it’s something local machine problem or windows nonsense 😄

[PsKminer]

Hi, good work!, can u remove the 3-gpu requirement?, i was using this miner in my 12x1080TI RIG and in my gaming computer 2x1080TI. Thx a lot, amazing miner.

[DonMaxim]

Hi, good work!, can u remove the 3-gpu requirement?, i was using this miner in my 12x1080TI RIG and in my gaming computer 2x1080TI. Thx a lot, amazing miner.

For 2x1080ti you can use any previous version of zfasminer,
As i know only the latest version v2.3.0 with cuda 9.2 required min 3 gpus, with others it’s only a recommendation...
Max

[PsKminer]

Hi, good work!, can u remove the 3-gpu requirement?, i was using this miner in my 12x1080TI RIG and in my gaming computer 2x1080TI. Thx a lot, amazing miner.

For 2x1080ti you can use any previous version of zfasminer,
As i know only the latest version v2.3.0 with cuda 9.2 required min 3 gpus, with others it’s only a recommendation...
Max

Yeah, i'm doing that, but the last version is faster than 2.29 .

[Dr_Victor]

Hi, good work!, can u remove the 3-gpu requirement?, i was using this miner in my 12x1080TI RIG and in my gaming computer 2x1080TI. Thx a lot, amazing miner.

For 2x1080ti you can use any previous version of zfasminer,
As i know only the latest version v2.3.0 with cuda 9.2 required min 3 gpus, with others it’s only a recommendation...
Max

Yeah, i'm doing that, but the last version is faster than 2.29 .

So, add gtx 1060 as a cheaper one and get speed-up of 2.30!

[N0pr3s3n7]

Guys is this miner using the same api as ccminer ? I mean is it comparable to use as with EthMonitoring or awesomeminer programs?

[Bitcoin5678]

Hi,
First of all. U did a excellent job in creating this miner!

However. I’ve been running into some problems.
I’ve been running this miner 12 hours now and it shows a significant increase in hashrate.
However, one rig, it crashed all of sudden and when I turn on the bat file, it does not respond on anything afterwards. ( not physical accessible now, only remote controlled) if it’s mining, it consumes approx 1200 watt. Now I see if i run the bat file, I see weird spikes and dip in power usage. (1200-500-1100-400-1200-200 etc) and I have to hard reset it .

Now, I’ve noticed at my other rigs, it sometimes got the same. In MSI afterburner I’ve noticed the  gpu usage does not stay 100% but it got like 100-0-100-0% usage etc. weird peaks.

How come it is not maintaining 100% gpu usage? Due the ups and downs in gpu usage there is ups and downs too in power usage. Is it safe for gpu and psu life span??

Any idea how to fix this?

[boomboommin]

10-12% rejected shares on pool(on miner no reject), new worker names didn`t works.

[S_Natural]

Hi,
First of all. U did a excellent job in creating this miner!

However. I’ve been running into some problems.
I’ve been running this miner 12 hours now and it shows a significant increase in hashrate.
However, one rig, it crashed all of sudden and when I turn on the bat file, it does not respond on anything afterwards. ( not physical accessible now, only remote controlled) if it’s mining, it consumes approx 1200 watt. Now I see if i run the bat file, I see weird spikes and dip in power usage. (1200-500-1100-400-1200-200 etc) and I have to hard reset it .

Now, I’ve noticed at my other rigs, it sometimes got the same. In MSI afterburner I’ve noticed the  gpu usage does not stay 100% but it got like 100-0-100-0% usage etc. weird peaks.

How come it is not maintaining 100% gpu usage? Due the ups and downs in gpu usage there is ups and downs too in power usage. Is it safe for gpu and psu life span??

Any idea how to fix this?

The same as you are, I got power spikes. My rig's power on last 24 hours:

https://imgur.com/a/jgnDVTJ

[Bitcoin5678]

The same as you are, I got power spikes. My rig's power on last 24 hours:

https://imgur.com/a/jgnDVTJ


-------------------------
One of my rig is not turning on now ._. think due the power spike there is some short or something burn. I am only having remote acces atm.. -.-

[S_Natural]

The same as you are, I got power spikes. My rig's power on last 24 hours:

https://imgur.com/a/jgnDVTJ


-------------------------
One of my rig is not turning on now ._. think due the power spike there is some short or something burn. I am only having remote acces atm.. -.-

I had that problem. The PSU can't turn on because it turned off to protect itself when power spiking, u have to hard reset it. It'll be okay, don't worry about it 

[Bitcoin5678]

The same as you are, I got power spikes. My rig's power on last 24 hours:

https://imgur.com/a/jgnDVTJ


-------------------------
One of my rig is not turning on now ._. think due the power spike there is some short or something burn. I am only having remote acces atm.. -.-

I had that problem. The PSU can't turn on because it turned off to protect itself when power spiking, u have to hard reset it. It'll be okay, don't worry about it 

Hard Reset?
Like plug it out and in again?

[S_Natural]

The same as you are, I got power spikes. My rig's power on last 24 hours:

https://imgur.com/a/jgnDVTJ


-------------------------
One of my rig is not turning on now ._. think due the power spike there is some short or something burn. I am only having remote acces atm.. -.-

I had that problem. The PSU can't turn on because it turned off to protect itself when power spiking, u have to hard reset it. It'll be okay, don't worry about it 

Hard Reset?
Like plug it out and in again?

That's right. Switch off the PSU's power button and switch on again 

[Bitcoin5678]

The same as you are, I got power spikes. My rig's power on last 24 hours:

https://imgur.com/a/jgnDVTJ


-------------------------
One of my rig is not turning on now ._. think due the power spike there is some short or something burn. I am only having remote acces atm.. -.-

I had that problem. The PSU can't turn on because it turned off to protect itself when power spiking, u have to hard reset it. It'll be okay, don't worry about it 

Hard Reset?
Like plug it out and in again?

That's right. Switch off the PSU's power button and switch on again 

the most easiest way to do yet did not think about it lol. Thank you

[Bitcoin5678]

10-12% rejected shares on pool(on miner no reject), new worker names didn`t works.

I’m experiencing 8-12% rejections on poolside too. My rigs running normal again

[boomboommin]

10-12% rejected shares on pool(on miner no reject), new worker names didn`t works.

I’m experiencing 8-12% rejections on poolside too. My rigs running normal again

new names working ?

[Bitcoin5678]

10-12% rejected shares on pool(on miner no reject), new worker names didn`t works.

I’m experiencing 8-12% rejections on poolside too. My rigs running normal again

new names working ?

I started with new names yes. In the beginning no rejections but now I’ve got it more and more..

About the new names, before zfastminer the name was let say 1070ti-1. I deleted the workers name in mph and  created a new one, but it’s exactly the same name.
So there’s a new worker , with the same name as before, on zfastminer.
Or do I need to change it to lets say 1070ti-one?

[_Dr2]

New names works for invalid share on miner side. Now we are talking about invalid share on pool side and I think this trick does not work.
Dev should take care of it.

[DonMaxim]

You don’t have to create new worker from the pool,
Just change the worker name in .bat file and than after some minutes the new worker will opened himself...

The mining pool server is on update and not all bugs comes from the miner,
But in last hours it’s seems that many times the miner disconnecting from server beqause of this update,
I hope that finally they are doing good job with all that updates and hope the good luck will comeback to the pool soon ...