[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside!

[Bitcoin5678]

You don’t have to create new worker from the pool,
Just change the worker name in .bat file and than after some minutes the new worker will opened himself...

The mining pool server is on update and not all bugs comes from the miner,
But in last hours it’s seems that many times the miner disconnecting from server beqause of this update,
I hope that finally they are doing good job with all that updates and hope the good luck will comeback to the pool soon ...

yea, ive got connection problems with MPH in asia. However, europe is still running flawless.

[1714597020]

1714597020

[1714597020]

1714597020

[1714597020]

1714597020

[1714597020]

1714597020

[1714597020]

1714597020

[zomby]

Hi form yesterday 4 May 2018 my miner does not connect to any of the pools suspect DNS eeror on MPH side use ip on ccminer cuda 9 now running but same ip does not work on your Zfastminer v2.29 (witch is the best tankyou ) pleas advise what do do thzzzzzzzzzzzz zomby from RSA

[BitSoftGeek]

Hi form yesterday 4 May 2018 my miner does not connect to any of the pools suspect DNS eeror on MPH side use ip on ccminer cuda 9 now running but same ip does not work on your Zfastminer v2.29 (witch is the best tankyou ) pleas advise what do do thzzzzzzzzzzzz zomby from RSA

Dear zomby,
thank you for your feedback!
In next hour we will release new version of zFastminer

Best Regards,
zFastminer team.

[mombay]

I've got the same problem as well, since yesterday my rig couldn't connect to the asia server. Changed to europe server, worked well until midnight it broke down.

But I managed to get them up again after I changed the DNS setting to a 3rd party DNS. No connection problems so far. At least a quick temporary fix until the dev fix it.

[nu2mlock]

Is work being done on the linux version at all?

[zomby]

Hi tankyou for fast reply only have 2 1080tis so cant use fix can you plz do the same maby with Zfastminer v2.29 plzzzzzzzzzzzzzzzzzzzzzz thx (ip fix)

[ten9]

Is work being done on the linux version at all?

Probably not.

[ToSh1]

Hello, the problem with the miner still remains. I can't connect with server.

[2018-05-04 16:01:01] Starting on stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581:20581
[2018-05-04 16:01:01] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:01] ...retry after 5 seconds
[2018-05-04 16:01:01] 4 miner threads started, using 'lyra2z' algorithm.
[2018-05-04 16:01:06] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:06] ...retry after 5 seconds
[2018-05-04 16:01:11] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:11] ...retry after 5 seconds
[2018-05-04 16:01:16] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:17] ...retry after 5 seconds


Any suggestions about this problem with MPH?

[Bitcoin5678]

having the same as well.

https://imgur.com/a/R5BkVOu

3 rigs :
1 x 7    , running flawless
2 x 12  , runs for 10 min and stratum fail.

[BitSoftGeek]

Hello, the problem with the miner still remains. I can't connect with server.

[2018-05-04 16:01:06] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:06] ...retry after 5 seconds
[2018-05-04 16:01:11] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:11] ...retry after 5 seconds
[2018-05-04 16:01:16] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com:20581
[2018-05-04 16:01:17] ...retry after 5 seconds

Any suggestions about this problem with MPH?

having the same as well.

https://imgur.com/a/R5BkVOu

3 rigs :
1 x 7    , running flawless
2 x 12  , runs for 10 min and stratum fail.

Dear ToSh1 and Bitcoin5678
We have found the bug, fixing it now and we will release zFastminer-v232 in next hour, sorry for inconvenience.

Best Regards,
zFastminer team.

[sabrine015]

started giving it a try today but for some reason Im getting alot of rejected shares, any solution ?

[BitSoftGeek]

[ANN] zFastminer-v2.3.2 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****

Update May 4th: Updated Version Release: zFastminer-v2.3.2

Changelog:

• Fixed Stratum connection Bug.
• Added support for IP addresses as URL- please choose the best IP for you with the lowest ping.
• Attempt to reduce power spikes.
• Mining Rigs with less then 2 GPU's not Supported.
• Max GPU's support increased to 19 per Rig.
• '--hide-diff' is ON by default to reduce CPU usage.
• Small Reduction of the Intensity for better stability.
• Compiled with Cuda 9.2

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.

Regarding power spikes:
We have looked about this issue with ccminer and found out that some users found solution by using '-plimit' option to limit the max power usage of the GPU's(in addition to MSI afterburner), you can set values per GPU like this:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q -plimit 60,60,60,60,60,60,60,60

This sets 60% power limit for each GPU on a rig with 8 GPU's, try this option with your preferred power percentage

Regarding MPH ongoing maintenance and stratum connection issues:
We enabled using IP address as URL and now you can choose the best IP address with the lowest ping for you and you shouldn't have connection problem anymore.
For example:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://139.162.132.70:20581 -u USERNAME.NewWORKERNAME -p x -q

List of IP addresses:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

How to Test Ping?:
Open command prompt/PowerShell and type:

Code:

ping us-east.lyra2z-hub.miningpoolhub.com

And you will see something like that:

Code:

Pinging us-east.lyra2z-hub.miningpoolhub.com [139.162.132.70] with 32 bytes of data:
Reply from 139.162.132.70: bytes=32 time=68ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55
Reply from 139.162.132.70: bytes=32 time=63ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55

ping europe.lyra2z-hub.miningpoolhub.com
Pinging europe.lyra2z-hub.miningpoolhub.com [139.162.46.14] with 32 bytes of data:
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=423ms TTL=51
Reply from 139.162.46.14: bytes=32 time=426ms TTL=51

Keep trying different IP's or URL's MPH URL's or choose from this list and test the ping:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

us-east.lyra2z-hub.miningpoolhub.com  
europe.lyra2z-hub.miningpoolhub.com
asia.lyra2z-hub.miningpoolhub.com
Until you find best IP address with the lowest ping and then use it in your .bat file.

Download zFastminer-v2.3.2

Code:

https://file.fm/f/dgqq53yn

HAPPY MINING
zFastminer team.

[ToSh1]

Dear zFastminer team, miner already works with a manually fix IP address.

B.R.
ToSh1

[Bitcoin5678]

[ANN] zFastminer-v2.3.2 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****

Update May 4th: Updated Version Release: zFastminer-v2.3.2

Changelog:

• Fixed Stratum connection Bug.
• Added support for IP addresses as URL- please choose the best IP for you with the lowest ping.
• Attempt to reduce power spikes.
• Mining Rigs with less then 2 GPU's not Supported.
• Max GPU's support increased to 19 per Rig.
• '--hide-diff' is ON by default to reduce CPU usage.
• Small Reduction of the Intensity for better stability.
• Compiled with Cuda 9.2

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.

Regarding power spikes:
We have looked about this issue with ccminer and found out that some users found solution by using '-plimit' option to limit the max power usage of the GPU's(in addition to MSI afterburner), you can set values per GPU like this:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q -plimit 60,60,60,60,60,60,60,60

This sets 60% power limit for each GPU on a rig with 8 GPU's, try this option with your preferred power percentage

Regarding MPH ongoing maintenance and stratum connection issues:
We enabled using IP address as URL and now you can choose the best IP address with the lowest ping for you and you shouldn't have connection problem anymore.
For example:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://139.162.132.70:20581 -u USERNAME.NewWORKERNAME -p x -q

List of IP addresses:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

How to Test Ping?:
Open command prompt/PowerShell and type:

Code:

ping us-east.lyra2z-hub.miningpoolhub.com

And you will see something like that:

Code:

Pinging us-east.lyra2z-hub.miningpoolhub.com [139.162.132.70] with 32 bytes of data:
Reply from 139.162.132.70: bytes=32 time=68ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55
Reply from 139.162.132.70: bytes=32 time=63ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55

ping europe.lyra2z-hub.miningpoolhub.com
Pinging europe.lyra2z-hub.miningpoolhub.com [139.162.46.14] with 32 bytes of data:
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=423ms TTL=51
Reply from 139.162.46.14: bytes=32 time=426ms TTL=51

Keep trying different IP's or URL's MPH URL's or choose from this list and test the ping:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

us-east.lyra2z-hub.miningpoolhub.com  
europe.lyra2z-hub.miningpoolhub.com
asia.lyra2z-hub.miningpoolhub.com
Until you find best IP address with the lowest ping and then use it in your .bat file.

Download zFastminer-v2.3.2

Code:

https://file.fm/f/dgqq53yn

HAPPY MINING
zFastminer team.

Thank you so much. I just tested it (running 15-20min now), looking good for now!

*edit*

It is running stable <3

[zomby]

haiii thankyou did 1000 shares now allgood   

[Bimmber]

• Compiled with Cuda 9.2

There is no CUDA 9.2 toolkit, how could you compile with 9.2 ?

[Bitcoin5678]

• Compiled with Cuda 9.2

There is no CUDA 9.2 toolkit, how could you compile with 9.2 ?

Download newest driver, 397.xx. There should be cuda 9.2 in there[/list]

[Buyingallcoinsz]

Instead of writing a dozen posts with vague statements you just could say what the miner fee is.
People wanna know that and if you avoid to answer this, people won't trust you.

Yeah why not give the miner fee

[DonMaxim]

Instead of writing a dozen posts with vague statements you just could say what the miner fee is.
People wanna know that and if you avoid to answer this, people won't trust you.

Yeah why not give the miner fee

Miner fee is 1.8% and you can see it when you start mining with zfastminer-v232,
Also the devs wrote it many times and just read the first updated post with all miner history...

[zomby]

i pay that 1.8% fee with a smile zFastminer gives me 30% boost in hash so iets a win win
thanx zfastminer team