edward1989
Newbie
 Offline
Activity: 1
Merit: 0
|
 |
October 31, 2018, 07:14:59 PM |
|
Hi, I am new to your miner, I would like to know if it is compatible with the CAYMAN GPU (HD 6950, HD 6970, HD 6990), thank you for your time.
|
|
|
|
|
|
|
|
|
|
I HATE TABLES I HATE TABLES I HA(╯°□°）╯︵ ┻━┻ TABLES I HATE TABLES I HATE TABLES
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
pbfarmer
Member
Offline
Activity: 340
Merit: 29
|
|
October 31, 2018, 08:28:30 PM |
|
Hi!
I have asus rx 580 8gb cards and sapphire nitro+ rx 570 4gb cards.
The 580 cards working good, but the 570 cards dont start. When i start the miner, the gpu clock and the memory clock load are 100%, but after few seconds the memory clock reseted to default 300MHz. The gpu clock load dont change, it stay 100%. The hashrate is 0 (only the 570 cards) In this time the entire system is slowing down extremely.
What might be the problem? Any idea?
Details:
Win 10, Adrenalin 18.5.1.
jce_cn_gpu_miner64.exe --no-cpu --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %*
Thanks!
Try to disable OC and over/undervolting. Try original bios. This is what I tried first. I flashed with original bios + otcp, but not working. What you've described is pretty common crash behavior for too high clocks and/or too low voltages. It's more likely your OC settings than your bios. |
|
|
|
|
|
UnclWish
|
|
October 31, 2018, 09:16:17 PM |
|
Hi!
I have asus rx 580 8gb cards and sapphire nitro+ rx 570 4gb cards.
The 580 cards working good, but the 570 cards dont start. When i start the miner, the gpu clock and the memory clock load are 100%, but after few seconds the memory clock reseted to default 300MHz. The gpu clock load dont change, it stay 100%. The hashrate is 0 (only the 570 cards) In this time the entire system is slowing down extremely.
What might be the problem? Any idea?
Details:
Win 10, Adrenalin 18.5.1.
jce_cn_gpu_miner64.exe --no-cpu --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %*
Thanks!
Try to disable OC and over/undervolting. Try original bios. This is what I tried first. I flashed with original bios + otcp, but not working. What parameters you use for 580 and what for 570? I use in auto mode: jce_cn_gpu_miner64.exe --no-cpu --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %* It's need to look what parameters miner applyes to each card at start. |
|
|
|
|
_ap_
Newbie
Offline
Activity: 28
Merit: 0
|
|
October 31, 2018, 09:19:38 PM |
|
Hi!
I have asus rx 580 8gb cards and sapphire nitro+ rx 570 4gb cards.
The 580 cards working good, but the 570 cards dont start. When i start the miner, the gpu clock and the memory clock load are 100%, but after few seconds the memory clock reseted to default 300MHz. The gpu clock load dont change, it stay 100%. The hashrate is 0 (only the 570 cards) In this time the entire system is slowing down extremely.
What might be the problem? Any idea?
Details:
Win 10, Adrenalin 18.5.1.
jce_cn_gpu_miner64.exe --no-cpu --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %*
Thanks!
Try to disable OC and over/undervolting. Try original bios. This is what I tried first. I flashed with original bios + otcp, but not working. What you've described is pretty common crash behavior for too high clocks and/or too low voltages. It's more likely your OC settings than your bios. Yes, that's what I was thinking. But after I restore the original state, I do not know what to think. Original rom, original gpu & memory clock, original voltages & power limit, (+ new adrenalin driver - 18.6.1) and the card get 0 mhs, and the system freeze. With another miner everything ok at this moment, so the card is working. |
|
|
|
|
slaycho
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 31, 2018, 10:36:19 PM |
|
Can someone help? My RX470 4GB cards cant start at all...When i start my miner at the very start my rig crash every time. I tried --auto mode and its the same. Change the setting of my cards and its still the same....THE ONLY rig that work have RX480 8GB cards ..... Using 18.5.1 and 1803win edition 60Gig virtual mem. Anyone with same problem like me?
|
|
|
|
|
_ap_
Newbie
Offline
Activity: 28
Merit: 0
|
|
October 31, 2018, 10:55:52 PM |
|
Hi!
I have asus rx 580 8gb cards and sapphire nitro+ rx 570 4gb cards.
The 580 cards working good, but the 570 cards dont start. When i start the miner, the gpu clock and the memory clock load are 100%, but after few seconds the memory clock reseted to default 300MHz. The gpu clock load dont change, it stay 100%. The hashrate is 0 (only the 570 cards) In this time the entire system is slowing down extremely.
What might be the problem? Any idea?
Details:
Win 10, Adrenalin 18.5.1.
jce_cn_gpu_miner64.exe --no-cpu --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %*
Thanks!
Try to disable OC and over/undervolting. Try original bios. This is what I tried first. I flashed with original bios + otcp, but not working. What parameters you use for 580 and what for 570? I use in auto mode: jce_cn_gpu_miner64.exe --no-cpu --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %* It's need to look what parameters miner applyes to each card at start. Detecting OpenCL-capable GPUs...
Found GPU 0, with:
Vendor: Intel
Processor: Intel(R) HD Graphics 510
Device: ff:ff
Compute-Units: 12
Cache Memory: 256 KB
Local Memory: 64 KB
Global Memory: 1603 MB
Addressing: 64-bits
Found GPU 1, with:
Vendor: AMD
Processor: Ellesmere
Device: 02:00
Compute-Units: 36
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8192 MB
Addressing: 64-bits
Found GPU 2, with:
Vendor: AMD
Processor: Ellesmere
Device: 04:00
Compute-Units: 32
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 4096 MB
Addressing: 64-bits
Preparing 4 Mining Threads...
+-- Thread 0 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 1 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 2 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 3 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
Cryptonight Variation: Cryptonight-BitTube v2 of July-2018
Low intensity.
Starting GPU Thread 0, on GPU 1
Created OpenCL Context for GPU 1 at 0000025e0971fba0
Created OpenCL Thread 0 Command-Queue for GPU 1 at 0000025e0971fd00
Scratchpad Allocation success for OpenCL Thread 0
Allocating big 3456MB scratchpad for OpenCL Thread 0...
Compiling kernels of OpenCL Thread 0...
Kernels of OpenCL Thread 0 compiled.
Starting GPU Thread 1, on GPU 1
Created OpenCL Thread 1 Command-Queue for GPU 1 at 0000025e0e028ec0
Scratchpad Allocation success for OpenCL Thread 1
Allocating big 3456MB scratchpad for OpenCL Thread 1...
Compiling kernels of OpenCL Thread 1...
Kernels of OpenCL Thread 1 compiled.
Starting GPU Thread 2, on GPU 2
Created OpenCL Context for GPU 2 at 0000025e09869370
Created OpenCL Thread 2 Command-Queue for GPU 2 at 0000025e0dd59790
Scratchpad Allocation success for OpenCL Thread 2
Allocating big 3456MB scratchpad for OpenCL Thread 2...
Compiling kernels of OpenCL Thread 2...
Kernels of OpenCL Thread 2 compiled.
Starting GPU Thread 3, on GPU 2
Created OpenCL Thread 3 Command-Queue for GPU 2 at 0000025e0dd59cd0
Scratchpad Allocation success for OpenCL Thread 3
Allocating big 3456MB scratchpad for OpenCL Thread 3...
Compiling kernels of OpenCL Thread 3...
Kernels of OpenCL Thread 3 compiled.
22:49:05 | BitTube (TUBE) Mining session starts!
22:49:05 | GPU Compute allocation starts at 80% and reaches 100% after ~5min,
22:49:05 | during this time, the hashrate may be unstable and inconsistent.
22:49:05 | Let the miner warm-up if you're tuning for performance.
22:49:06 | Connecting to mining pool tube.ingest.cryptoknight.cc:5631 ...
22:49:06 | Connected to pool. Now logging in...
22:49:06 | Successfuly logged as bxcAUWyAktcLcsdGA1YX7SLkqU3xjCt348An7KosnkCRfE3RoMZa3SYWyCJsp1C34oH3dyJ5dqFwigmfMbGZ844W1rRBDXW4R.50000
22:49:06 | Pool changes Difficulty to 50000.
22:49:19 | GPU 1 Thread 1 Lane 414 finds a Share, value 50000
22:49:19 | Accepted by the pool in 358 ms.
22:49:32 | GPU 1 Thread 1 Lane 785 finds a Share, value 50000
22:49:32 | Accepted by the pool in 388 ms.
22:49:36 | Hashrate GPU Thread 0: 335.78 h/s
22:49:36 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:36 | Hashrate GPU Thread 2: 0.00 h/s
22:49:36 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:36 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:37 | Hashrate GPU Thread 0: 335.78 h/s
22:49:37 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:37 | Hashrate GPU Thread 2: 0.00 h/s
22:49:37 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:37 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:54 | GPU 1: Temp: 48C - Fan: 0% -- Shares: Good: 2 Bad: 0
22:49:55 | GPU 2: Temp: 44C - Fan: 0% -- Shares: Good: 0 Bad: 0 |
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
|
October 31, 2018, 11:16:24 PM |
|
Detecting OpenCL-capable GPUs...
Found GPU 0, with:
Vendor: Intel
Processor: Intel(R) HD Graphics 510
Device: ff:ff
Compute-Units: 12
Cache Memory: 256 KB
Local Memory: 64 KB
Global Memory: 1603 MB
Addressing: 64-bits
Found GPU 1, with:
Vendor: AMD
Processor: Ellesmere
Device: 02:00
Compute-Units: 36
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8192 MB
Addressing: 64-bits
Found GPU 2, with:
Vendor: AMD
Processor: Ellesmere
Device: 04:00
Compute-Units: 32
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 4096 MB
Addressing: 64-bits
Preparing 4 Mining Threads...
+-- Thread 0 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 1 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 2 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 3 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
Cryptonight Variation: Cryptonight-BitTube v2 of July-2018
Low intensity.
Starting GPU Thread 0, on GPU 1
Created OpenCL Context for GPU 1 at 0000025e0971fba0
Created OpenCL Thread 0 Command-Queue for GPU 1 at 0000025e0971fd00
Scratchpad Allocation success for OpenCL Thread 0
Allocating big 3456MB scratchpad for OpenCL Thread 0...
Compiling kernels of OpenCL Thread 0...
Kernels of OpenCL Thread 0 compiled.
Starting GPU Thread 1, on GPU 1
Created OpenCL Thread 1 Command-Queue for GPU 1 at 0000025e0e028ec0
Scratchpad Allocation success for OpenCL Thread 1
Allocating big 3456MB scratchpad for OpenCL Thread 1...
Compiling kernels of OpenCL Thread 1...
Kernels of OpenCL Thread 1 compiled.
Starting GPU Thread 2, on GPU 2
Created OpenCL Context for GPU 2 at 0000025e09869370
Created OpenCL Thread 2 Command-Queue for GPU 2 at 0000025e0dd59790
Scratchpad Allocation success for OpenCL Thread 2
Allocating big 3456MB scratchpad for OpenCL Thread 2...
Compiling kernels of OpenCL Thread 2...
Kernels of OpenCL Thread 2 compiled.
Starting GPU Thread 3, on GPU 2
Created OpenCL Thread 3 Command-Queue for GPU 2 at 0000025e0dd59cd0
Scratchpad Allocation success for OpenCL Thread 3
Allocating big 3456MB scratchpad for OpenCL Thread 3...
Compiling kernels of OpenCL Thread 3...
Kernels of OpenCL Thread 3 compiled.
22:49:05 | BitTube (TUBE) Mining session starts!
22:49:05 | GPU Compute allocation starts at 80% and reaches 100% after ~5min,
22:49:05 | during this time, the hashrate may be unstable and inconsistent.
22:49:05 | Let the miner warm-up if you're tuning for performance.
22:49:06 | Connecting to mining pool tube.ingest.cryptoknight.cc:5631 ...
22:49:06 | Connected to pool. Now logging in...
22:49:06 | Successfuly logged as bxcAUWyAktcLcsdGA1YX7SLkqU3xjCt348An7KosnkCRfE3RoMZa3SYWyCJsp1C34oH3dyJ5dqFwigmfMbGZ844W1rRBDXW4R.50000
22:49:06 | Pool changes Difficulty to 50000.
22:49:19 | GPU 1 Thread 1 Lane 414 finds a Share, value 50000
22:49:19 | Accepted by the pool in 358 ms.
22:49:32 | GPU 1 Thread 1 Lane 785 finds a Share, value 50000
22:49:32 | Accepted by the pool in 388 ms.
22:49:36 | Hashrate GPU Thread 0: 335.78 h/s
22:49:36 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:36 | Hashrate GPU Thread 2: 0.00 h/s
22:49:36 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:36 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:37 | Hashrate GPU Thread 0: 335.78 h/s
22:49:37 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:37 | Hashrate GPU Thread 2: 0.00 h/s
22:49:37 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:37 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:54 | GPU 1: Temp: 48C - Fan: 0% -- Shares: Good: 2 Bad: 0
22:49:55 | GPU 2: Temp: 44C - Fan: 0% -- Shares: Good: 0 Bad: 0 it's because 4GB GPU but it used 2 thread with multi_hash 864, so better use manual config. you can try below config : { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 2, "multi_hash":944 }, |
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
|
October 31, 2018, 11:18:29 PM |
|
Abort was called at 318 line in file:
D:\qb\workspace\19992\src\vpg-compute-neo\runtime\os_interface\windows\wddm.cpp
Press any key to continue . . . That looks like a crash in a driver, but I never reproduced it. Does it happen at mining start? Yes it happens after the start and it started since the first broken version of V8 miner. It affects all algo and bricks the miner. Older versions work. can you post your GPU Config? I believe because your config starting with index 0 which is iGPU. |
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
|
October 31, 2018, 11:21:40 PM |
|
Can someone help? My RX470 4GB cards cant start at all...When i start my miner at the very start my rig crash every time. I tried --auto mode and its the same. Change the setting of my cards and its still the same....THE ONLY rig that work have RX480 8GB cards ..... Using 18.5.1 and 1803win edition 60Gig virtual mem. Anyone with same problem like me?
your problem I guess is the same with _ap_ which is in auto mode 4GB GPU have 2 thread and multi_hash 864, so better use manual config 4GB GPU 1 thread multi_hash 944 or 2 thread but multi_hash 472. |
|
|
|
|
|
ysakay
|
|
October 31, 2018, 11:35:34 PM |
|
I used this miner a few days.
It's so good but I have two problems.
1- How can i turn off Onboard GPU?
2- Can i add low hashrate parameters like claymore?
|
|
|
|
|
_ap_
Newbie
Offline
Activity: 28
Merit: 0
|
|
November 01, 2018, 12:26:14 AM |
|
Detecting OpenCL-capable GPUs...
Found GPU 0, with:
Vendor: Intel
Processor: Intel(R) HD Graphics 510
Device: ff:ff
Compute-Units: 12
Cache Memory: 256 KB
Local Memory: 64 KB
Global Memory: 1603 MB
Addressing: 64-bits
Found GPU 1, with:
Vendor: AMD
Processor: Ellesmere
Device: 02:00
Compute-Units: 36
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8192 MB
Addressing: 64-bits
Found GPU 2, with:
Vendor: AMD
Processor: Ellesmere
Device: 04:00
Compute-Units: 32
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 4096 MB
Addressing: 64-bits
Preparing 4 Mining Threads...
+-- Thread 0 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 1 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 2 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 3 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
Cryptonight Variation: Cryptonight-BitTube v2 of July-2018
Low intensity.
Starting GPU Thread 0, on GPU 1
Created OpenCL Context for GPU 1 at 0000025e0971fba0
Created OpenCL Thread 0 Command-Queue for GPU 1 at 0000025e0971fd00
Scratchpad Allocation success for OpenCL Thread 0
Allocating big 3456MB scratchpad for OpenCL Thread 0...
Compiling kernels of OpenCL Thread 0...
Kernels of OpenCL Thread 0 compiled.
Starting GPU Thread 1, on GPU 1
Created OpenCL Thread 1 Command-Queue for GPU 1 at 0000025e0e028ec0
Scratchpad Allocation success for OpenCL Thread 1
Allocating big 3456MB scratchpad for OpenCL Thread 1...
Compiling kernels of OpenCL Thread 1...
Kernels of OpenCL Thread 1 compiled.
Starting GPU Thread 2, on GPU 2
Created OpenCL Context for GPU 2 at 0000025e09869370
Created OpenCL Thread 2 Command-Queue for GPU 2 at 0000025e0dd59790
Scratchpad Allocation success for OpenCL Thread 2
Allocating big 3456MB scratchpad for OpenCL Thread 2...
Compiling kernels of OpenCL Thread 2...
Kernels of OpenCL Thread 2 compiled.
Starting GPU Thread 3, on GPU 2
Created OpenCL Thread 3 Command-Queue for GPU 2 at 0000025e0dd59cd0
Scratchpad Allocation success for OpenCL Thread 3
Allocating big 3456MB scratchpad for OpenCL Thread 3...
Compiling kernels of OpenCL Thread 3...
Kernels of OpenCL Thread 3 compiled.
22:49:05 | BitTube (TUBE) Mining session starts!
22:49:05 | GPU Compute allocation starts at 80% and reaches 100% after ~5min,
22:49:05 | during this time, the hashrate may be unstable and inconsistent.
22:49:05 | Let the miner warm-up if you're tuning for performance.
22:49:06 | Connecting to mining pool tube.ingest.cryptoknight.cc:5631 ...
22:49:06 | Connected to pool. Now logging in...
22:49:06 | Successfuly logged as bxcAUWyAktcLcsdGA1YX7SLkqU3xjCt348An7KosnkCRfE3RoMZa3SYWyCJsp1C34oH3dyJ5dqFwigmfMbGZ844W1rRBDXW4R.50000
22:49:06 | Pool changes Difficulty to 50000.
22:49:19 | GPU 1 Thread 1 Lane 414 finds a Share, value 50000
22:49:19 | Accepted by the pool in 358 ms.
22:49:32 | GPU 1 Thread 1 Lane 785 finds a Share, value 50000
22:49:32 | Accepted by the pool in 388 ms.
22:49:36 | Hashrate GPU Thread 0: 335.78 h/s
22:49:36 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:36 | Hashrate GPU Thread 2: 0.00 h/s
22:49:36 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:36 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:37 | Hashrate GPU Thread 0: 335.78 h/s
22:49:37 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:37 | Hashrate GPU Thread 2: 0.00 h/s
22:49:37 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:37 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:54 | GPU 1: Temp: 48C - Fan: 0% -- Shares: Good: 2 Bad: 0
22:49:55 | GPU 2: Temp: 44C - Fan: 0% -- Shares: Good: 0 Bad: 0 it's because 4GB GPU but it used 2 thread with multi_hash 864, so better use manual config. you can try below config : { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 2, "multi_hash":944 }, many thanks, it's working now! what steps recommend increase the multi hash? 580 hashrate is very good (prev miner: 930H/s, jce now: 1030H/s), but the 570 a little bit slow (prev miner: 760H/s, jce now: 680H/s) |
|
|
|
|
Mike Leone
Newbie
Offline
Activity: 8
Merit: 0
|
|
November 01, 2018, 04:19:10 AM |
|
Hey. RX480 video card 8GB nitro + error "Compilation of OpenCL kernels failed. what version of drivers and Windows? Adrenalin 18.6.1 Win10x64 Did you tried to lower multi_hash parameters? Yes, it did not help ( |
|
|
|
|
Mike Leone
Newbie
Offline
Activity: 8
Merit: 0
|
|
November 01, 2018, 04:45:43 AM
Last edit: November 01, 2018, 05:05:11 AM by Mike Leone |
|
Hey. RX480 video card 8GB nitro + error "Compilation of OpenCL kernels failed. what version of drivers and Windows? Adrenalin 18.6.1 Win10x64 Did you tried to lower multi_hash parameters? Here is what he writes in auto mode "Failed to allocate shared Large Page, using normal memory (slower). Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower)." Run Administrator no effect I tried to put 8gb RAM no effect ( |
|
|
|
|
|
UnclWish
|
|
November 01, 2018, 05:07:01 AM |
|
Detecting OpenCL-capable GPUs...
Found GPU 0, with:
Vendor: Intel
Processor: Intel(R) HD Graphics 510
Device: ff:ff
Compute-Units: 12
Cache Memory: 256 KB
Local Memory: 64 KB
Global Memory: 1603 MB
Addressing: 64-bits
Found GPU 1, with:
Vendor: AMD
Processor: Ellesmere
Device: 02:00
Compute-Units: 36
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8192 MB
Addressing: 64-bits
Found GPU 2, with:
Vendor: AMD
Processor: Ellesmere
Device: 04:00
Compute-Units: 32
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 4096 MB
Addressing: 64-bits
Preparing 4 Mining Threads...
+-- Thread 0 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 1 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 2 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
+-- Thread 3 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 864 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 16 |
+-------------------------------------------+
Cryptonight Variation: Cryptonight-BitTube v2 of July-2018
Low intensity.
Starting GPU Thread 0, on GPU 1
Created OpenCL Context for GPU 1 at 0000025e0971fba0
Created OpenCL Thread 0 Command-Queue for GPU 1 at 0000025e0971fd00
Scratchpad Allocation success for OpenCL Thread 0
Allocating big 3456MB scratchpad for OpenCL Thread 0...
Compiling kernels of OpenCL Thread 0...
Kernels of OpenCL Thread 0 compiled.
Starting GPU Thread 1, on GPU 1
Created OpenCL Thread 1 Command-Queue for GPU 1 at 0000025e0e028ec0
Scratchpad Allocation success for OpenCL Thread 1
Allocating big 3456MB scratchpad for OpenCL Thread 1...
Compiling kernels of OpenCL Thread 1...
Kernels of OpenCL Thread 1 compiled.
Starting GPU Thread 2, on GPU 2
Created OpenCL Context for GPU 2 at 0000025e09869370
Created OpenCL Thread 2 Command-Queue for GPU 2 at 0000025e0dd59790
Scratchpad Allocation success for OpenCL Thread 2
Allocating big 3456MB scratchpad for OpenCL Thread 2...
Compiling kernels of OpenCL Thread 2...
Kernels of OpenCL Thread 2 compiled.
Starting GPU Thread 3, on GPU 2
Created OpenCL Thread 3 Command-Queue for GPU 2 at 0000025e0dd59cd0
Scratchpad Allocation success for OpenCL Thread 3
Allocating big 3456MB scratchpad for OpenCL Thread 3...
Compiling kernels of OpenCL Thread 3...
Kernels of OpenCL Thread 3 compiled.
22:49:05 | BitTube (TUBE) Mining session starts!
22:49:05 | GPU Compute allocation starts at 80% and reaches 100% after ~5min,
22:49:05 | during this time, the hashrate may be unstable and inconsistent.
22:49:05 | Let the miner warm-up if you're tuning for performance.
22:49:06 | Connecting to mining pool tube.ingest.cryptoknight.cc:5631 ...
22:49:06 | Connected to pool. Now logging in...
22:49:06 | Successfuly logged as bxcAUWyAktcLcsdGA1YX7SLkqU3xjCt348An7KosnkCRfE3RoMZa3SYWyCJsp1C34oH3dyJ5dqFwigmfMbGZ844W1rRBDXW4R.50000
22:49:06 | Pool changes Difficulty to 50000.
22:49:19 | GPU 1 Thread 1 Lane 414 finds a Share, value 50000
22:49:19 | Accepted by the pool in 358 ms.
22:49:32 | GPU 1 Thread 1 Lane 785 finds a Share, value 50000
22:49:32 | Accepted by the pool in 388 ms.
22:49:36 | Hashrate GPU Thread 0: 335.78 h/s
22:49:36 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:36 | Hashrate GPU Thread 2: 0.00 h/s
22:49:36 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:36 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:37 | Hashrate GPU Thread 0: 335.78 h/s
22:49:37 | Hashrate GPU Thread 1: 398.09 h/s - Total GPU 1: 733.86 h/s
22:49:37 | Hashrate GPU Thread 2: 0.00 h/s
22:49:37 | Hashrate GPU Thread 3: 0.00 h/s - Total GPU 2: 0.00 h/s
22:49:37 | Total: 733.86 h/s - Max: 733.86 h/s
22:49:54 | GPU 1: Temp: 48C - Fan: 0% -- Shares: Good: 2 Bad: 0
22:49:55 | GPU 2: Temp: 44C - Fan: 0% -- Shares: Good: 0 Bad: 0 it's because 4GB GPU but it used 2 thread with multi_hash 864, so better use manual config. you can try below config : { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 4, "delta" : 4, "epsilon" : 4, "zeta":4, "index" : 2, "multi_hash":944 }, many thanks, it's working now! what steps recommend increase the multi hash? 580 hashrate is very good (prev miner: 930H/s, jce now: 1030H/s), but the 570 a little bit slow (prev miner: 760H/s, jce now: 680H/s) All, as I thought... Miner used settings for 8gb card on 4gb card... Optimal settings... For 8Gb try { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 16, "gamma" : 8, "delta" : 8, "epsilon" : 8, "zeta" : 8, "index" : 1, "multi_hash":944 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 16, "gamma" : 8, "delta" : 8, "epsilon" : 8, "zeta" : 8, "index" : 1, "multi_hash":944 }, for 4Gb: { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 16, "gamma" : 8, "delta" : 8, "epsilon" : 8, "zeta" : 8, "index" : 1, "multi_hash":472 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 16, "gamma" : 8, "delta" : 8, "epsilon" : 8, "zeta" : 8, "index" : 1, "multi_hash":472 }, If with 472 will be error try one of 472 lower to 464. |
|
|
|
|
JCE-Miner (OP)
Member
Offline
Activity: 350
Merit: 22
|
|
November 01, 2018, 01:00:56 PM
Last edit: November 01, 2018, 01:43:39 PM by JCE-Miner |
|
Hi all! First, a new appologize for all messages I hadn't read yet and support i skipped, i'm really lacking time. I'm about to ship a new GPU version, with * Fixed compatibility with AMD drivers 14*
* Tahiti-specific optimization v8 +1%
* Light optimization v8 for other GPUs
* Now only Intel and AMD devices are detected, other are just ignored
*About the drivers 14, that was the same bug as in Stak and Xmrig, because i used the original reference code. Starting with JCE 0.33b3 my code is brand new and very different. So the bug is not fixed, it just vanished away. Tested on a HD6950 with drivers 14.12. "Failed to allocate shared Large Page, using normal memory (slower). Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower)." That's a message about the CPU mining, because --auto also configures the CPU. To stay on GPU only, add parameter --no-cpuHow can i turn off Onboard GPU? There's a Claymore-stype parameter for this: -g If you have GPUs 0, 1, 2 and 3, and want to mine ony on GPU 1 and 3 for example, add parameter: -g 1,3Note there's so space around the comma. -g stands for restrict Gpus toedit: 0.33b3 GPU is online |
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
November 01, 2018, 02:49:57 PM |
|
Someone has good settings for MoneroV8 for the RX550? I can´t get a stable hashrate. I have 6 similiar RX550 with same bios. Hashrate is very unstable and mostly 1 card is slower then all other, and this change all 5min. Monero V7 works stable, and with SRB it works stable too, but with srb the effective pool hashrate is 400h slower then the reported hashrate.
|
|
|
|
|
fluxy12
Jr. Member
Offline
Activity: 145
Merit: 1
|
|
November 01, 2018, 03:04:03 PM
Last edit: November 01, 2018, 03:15:58 PM by fluxy12 |
|
Hello,
I cannot get JCE mine Stellite, do you have an example of commande line for it ?
I tryed to 0 in the fork but it doesn't work, pool is miner rocks and wallet without payment ID.
Nevermind it is an adress error, but this coin is not so good anyway. |
|
|
|
|
|
UnclWish
|
|
November 01, 2018, 03:41:00 PM |
|
Someone has good settings for MoneroV8 for the RX550? I can´t get a stable hashrate. I have 6 similiar RX550 with same bios. Hashrate is very unstable and mostly 1 card is slower then all other, and this change all 5min. Monero V7 works stable, and with SRB it works stable too, but with srb the effective pool hashrate is 400h slower then the reported hashrate.
Memory is 2Mb? Try this parameters: { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 8, "delta" : 8, "epsilon" : 8, "zeta" : 8, "index" : 1, "multi_hash":464 }, { "mode" : "GPU", "worksize" : 8, "alpha" : 64, "beta" : 8, "gamma" : 8, "delta" : 8, "epsilon" : 8, "zeta" : 8, "index" : 1, "multi_hash":464 } Then try to increase both multi_hash parameters untill your card have enough memory or speed became lower even at start. |
|
|
|
|
monote
Newbie
Offline
Activity: 26
Merit: 1
|
|
November 01, 2018, 04:01:25 PM |
|
guys! i recently got a rx550, 2gb. Any idea if i can get more than 300h/s on cn-heavy?  |
|
|
|
|
Uaciuganadu
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 01, 2018, 07:05:14 PM |
|
Hey JCE, Issue still persists!: For Windows 64-bits
Analyzing Processors topology...
Intel(R) Celeron(R) CPU G3930 @ 2.90GHz
Assembly codename: generic_aes
SSE2 : Yes
SSE3 : Yes
SSE4 : Yes
AES : Yes
AVX : No
AVX2 : No
Found CPU 0, with:
L1 Cache: 32 KB
L2 Cache: 256 KB
L3 Cache: 2048 KB, shared with CPU 1
Found CPU 1, with:
L1 Cache: 32 KB
L2 Cache: 256 KB
L3 Cache: 2048 KB, shared with CPU 0
Detecting OpenCL-capable GPUs...
Found GPU 0, with:
Vendor: Intel
Processor: Intel(R) HD Graphics 610
Device: ff:ff
Compute-Units: 12
Cache Memory: 256 KB
Local Memory: 64 KB
Global Memory: 1592 MB
Addressing: 64-bits
Found GPU 1, with:
Vendor: AMD
Processor: Ellesmere
Device: 06:00
Compute-Units: 36
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8192 MB
Addressing: 64-bits
Found GPU 2, with:
Vendor: AMD
Processor: gfx900
Device: 09:00
Compute-Units: 64
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8176 MB
Addressing: 64-bits
Found GPU 3, with:
Vendor: AMD
Processor: gfx900
Device: 03:00
Compute-Units: 64
Cache Memory: 16 KB
Local Memory: 32 KB
Global Memory: 8176 MB
Addressing: 64-bits
Preparing 7 Mining Threads...
+-- Thread 0 config ------------------------+
| Run on CPU: 0 |
| Use cache: yes |
| Multi-hash: no |
| Assembly module: generic_aes |
+-------------------------------------------+
+-- Thread 1 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 1984 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 8 |
+-------------------------------------------+
+-- Thread 2 config ------------------------+
| Run on GPU: 1 |
| Multi-hash: 1984 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 8 |
+-------------------------------------------+
+-- Thread 3 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 1984 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 8 |
+-------------------------------------------+
+-- Thread 4 config ------------------------+
| Run on GPU: 2 |
| Multi-hash: 1984 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 8 |
+-------------------------------------------+
+-- Thread 5 config ------------------------+
| Run on GPU: 0 |
| Multi-hash: 1120 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 8 |
+-------------------------------------------+
+-- Thread 6 config ------------------------+
| Run on GPU: 0 |
| Multi-hash: 1120 |
| Worksize: 8 |
| Factor Alpha 64 |
| Factor Beta 8 |
+-------------------------------------------+
Cryptonight Variation: Cryptonight V8 fork of Oct-2018
Low intensity.
Starting CPU Thread 0, affinity: CPU 0
Thread 0 successfully bound to CPU 0
Allocated shared Large Page at: 0000000008400000
Allocated 2MB Cached Large Page Scratchpad Buffer for CPU 0 of NUMA node 0 at: 0000000008600000
Starting GPU Thread 1, on GPU 1
Created OpenCL Context for GPU 1 at 0000000007d644b0
Created OpenCL Thread 1 Command-Queue for GPU 1 at 0000000007d64610
Scratchpad Allocation success for OpenCL Thread 1
Allocating big 3968MB scratchpad for OpenCL Thread 1...
Compiling kernels of OpenCL Thread 1...
Kernels of OpenCL Thread 1 compiled.
Starting GPU Thread 2, on GPU 1
Created OpenCL Thread 2 Command-Queue for GPU 1 at 000000000d18a620
Scratchpad Allocation success for OpenCL Thread 2
Allocating big 3968MB scratchpad for OpenCL Thread 2...
Compiling kernels of OpenCL Thread 2...
Kernels of OpenCL Thread 2 compiled.
Starting GPU Thread 3, on GPU 2
Created OpenCL Context for GPU 2 at 0000000007f1ff40
Created OpenCL Thread 3 Command-Queue for GPU 2 at 00000000118530b0
Scratchpad Allocation success for OpenCL Thread 3
Allocating big 3968MB scratchpad for OpenCL Thread 3...
Compiling kernels of OpenCL Thread 3...
Kernels of OpenCL Thread 3 compiled.
Starting GPU Thread 4, on GPU 2
Created OpenCL Thread 4 Command-Queue for GPU 2 at 0000000011852b70
Scratchpad Allocation success for OpenCL Thread 4
Allocating big 3968MB scratchpad for OpenCL Thread 4...
Compiling kernels of OpenCL Thread 4...
Kernels of OpenCL Thread 4 compiled.
Starting GPU Thread 5, on GPU 0
Created OpenCL Context for GPU 0 at 000000001160b0b0
Created OpenCL Thread 5 Command-Queue for GPU 0 at 0000000011598020
Scratchpad Allocation success for OpenCL Thread 5
Allocating big 2240MB scratchpad for OpenCL Thread 5...
Compiling kernels of OpenCL Thread 5...
Kernels of OpenCL Thread 5 compiled.
Starting GPU Thread 6, on GPU 0
Created OpenCL Thread 6 Command-Queue for GPU 0 at 0000000011598190
Scratchpad Allocation success for OpenCL Thread 6
Allocating big 2240MB scratchpad for OpenCL Thread 6...
Compiling kernels of OpenCL Thread 6...
Kernels of OpenCL Thread 6 compiled.
Keep-Alive enabled
Devfee for CPU is 1.5%
Devfee for GPU is 0.9%
21:01:42 | MoneroOcean Mining session starts!
During mining time, press:
h display hashrate for each mining thread.
r display full report.
p pause all.
u pause CPUs.
0-F pause GPU 0-15.
t GPU temperature and fan speed.
q quit.
21:01:42 | GPU Compute allocation starts at 80% and reaches 100% after ~5min,
21:01:42 | during this time, the hashrate may be unstable and inconsistent.
21:01:42 | Let the miner warm-up if you're tuning for performance.
21:01:43 | Connecting to mining pool gulf.moneroocean.stream:10064 ...
21:01:43 | Connected to pool. Now logging in...
21:01:44 | Successfuly logged as //PRIVATE INFO//
21:01:44 | Pool changes Difficulty to 64000.
Abort was called at 318 line in file:
D:\qb\workspace\19992\src\vpg-compute-neo\runtime\os_interface\windows\wddm.cpp
Press any key to continue . . . |
|
|
|
|
|
