Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip

[kryptoc007]

https://bitcointalk.org/index.php?topic=344970.0


6. I see "x" in the ASIC Status

For the ASIC status wise, "x" doesn't necessary means the chip is faulty or failing.  If the hashing power seems to be affected, please check your PSU and wiring and reboot and check the status a few times.  It should go back to an average 168-180 gh/s range per AntMiner.

when you are getting "x" on the ASIC chip status, please turn off the antminer and double check your PSU cables are connected well and restart.  Check the status in about 5 minutes and every 30 minutes for a few hours and see if the "x" are showing up constantly at the same chip or randomly changes or completely disappear.

"x's" do indicate the chip is failing or having issues---to my knowledge.  power off the ant, give it a minute, then power back on....check if the Asics still have "x's".....contact either Sushi or Bitmain and ask them as to what they advise. 

AND most definitely check your hashing speed with another site, slush is not the best for indicating speed, that site has had all kinds of issues lately.

thanks everyone for the help.  After powering off/on I see only 2 Xs, but since I get approx 180 GH/s, I am going to leave it at that.

[1714842852]

1714842852

[1714842852]

1714842852

[1714842852]

1714842852

[S.Z.]

For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s

I know that antminer kan works without local proxy, but speed is lower for 30-40%.

[Epoch]

For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s

I know that antminer kan works without local proxy, but speed is lower for 30-40%.

Can anyone confirm this with the newer AntMiners?

[canford]

I am running two Antminers, no proxy, just pointed them at pool.  Used wired Ethernet, left WiFi alone.  Stable at 203-204 GH/s each.

[pvnamk19]

@kryptoc007:
One of my Ants has xx on ASIC status and I just download the latest firmware from https://github.com/AntMiner/AntGen1/tree/master/firmware
- Download antMiner_openwrt20140207.bin to your computer.
- At Ant web page: select System => Backup/Flash Firmware and update the new firmware => proceed to reboot.

In my case I just use frequency 375 MHZ because I want to keep their Temp around 47-48: it boosts around 10GHz/ant.

Hope this help!

[Swimmer63]

For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s

I know that antminer kan works without local proxy, but speed is lower for 30-40%.

Can anyone confirm this with the newer AntMiners?

I have a dozen and at least one from almost every GB.  Never heard of this and never have a speed issue using ethernet.

[meornot69]

hi,

Network   Protocol        Source                             Destination                          Transfer
IPV4              TCP   192.168.0.244:57834   unknown.servercentral.net:3333   14.58 KB (107 Pkts.)
IPV4              TCP   192.168.0.103:52635   192.168.0.244:80                            6.55 KB (62 Pkts.)
IPV4              TCP   192.168.0.103:52637   192.168.0.244:80                            2.57 KB (36 Pkts.)
IPV4              UDP   192.168.0.244:47585   wonder.bluepink.ro:123                    76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:58324   ntp2.dooh.ro:123                            76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:45263   wonder.bluepink.ro:123                    76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:46730   ups.alsys.ro:123                            76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:54204   ups.alsys.ro:123                            76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:44309   89.149.54.18:123                            76.00 B (1 Pkts.)




someone knows? what do they do those connections on upd port 123?

[jedimstr]

hi,

Network   Protocol        Source                             Destination                          Transfer
IPV4              TCP   192.168.0.244:57834   unknown.servercentral.net:3333   14.58 KB (107 Pkts.)
IPV4              TCP   192.168.0.103:52635   192.168.0.244:80                            6.55 KB (62 Pkts.)
IPV4              TCP   192.168.0.103:52637   192.168.0.244:80                            2.57 KB (36 Pkts.)
IPV4              UDP   192.168.0.244:47585   wonder.bluepink.ro:123                    76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:58324   ntp2.dooh.ro:123                            76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:45263   wonder.bluepink.ro:123                    76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:46730   ups.alsys.ro:123                            76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:54204   ups.alsys.ro:123                            76.00 B (1 Pkts.)
IPV4              UDP   192.168.0.244:44309   89.149.54.18:123                            76.00 B (1 Pkts.)




someone knows? what do they do those connections on upd port 123?

NTP - network time protocol

Your Antminer is updating/syncing it's clock. Normal.

[freebit13]

https://bitcointalk.org/index.php?topic=344970.0
6. I see "x" in the ASIC Status

For the ASIC status wise, "x" doesn't necessary means the chip is faulty or failing.  If the hashing power seems to be affected, please check your PSU and wiring and reboot and check the status a few times.  It should go back to an average 168-180 gh/s range per AntMiner.

when you are getting "x" on the ASIC chip status, please turn off the antminer and double check your PSU cables are connected well and restart.  Check the status in about 5 minutes and every 30 minutes for a few hours and see if the "x" are showing up constantly at the same chip or randomly changes or completely disappear.

"x's" do indicate the chip is failing or having issues---to my knowledge.  power off the ant, give it a minute, then power back on....check if the Asics still have "x's".....contact either Sushi or Bitmain and ask them as to what they advise. 

AND most definitely check your hashing speed with another site, slush is not the best for indicating speed, that site has had all kinds of issues lately.

thanks everyone for the help.  After powering off/on I see only 2 Xs, but since I get approx 180 GH/s, I am going to leave it at that.

I had a bunch of X's showing up randomly, but proper cooling seems to have fixed the issue: https://bitcointalk.org/index.php?topic=355387.msg5174775#msg5174775

[papamoi]

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

[loshia]

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

Super I am glad to hear it
Ask for volume discount and you can get an USER MANUAL for free
you are pathetic papamoi  
----------------
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
---------------------


that made my day  
How do you expect to make any BTC related business when you do miss the basics
Any way make a group buy and collect 2 or 3 times from what you are going to pay because of volume discount. This is the only thing which brainless idiot ca do
The questions is how many brainless idiots (bigger than you)  are left to send you their BTC

[Unacceptable]

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

Super I am glad to hear it
Ask for volume discount and you can get an USER MANUAL for free
you are pathetic papamoi  
----------------
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
---------------------


that made my day  
How do you expect to make any BTC related business when you do miss the basics
Any way make a group buy and collect 2 or 3 times from what you are going to pay because of volume discount. This is the only thing which brainless idiot ca do
The questions is how many brainless idiots (bigger than you)  are left to send you their BTC

Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear  

But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software.

I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up  

[loshia]

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

Super I am glad to hear it
Ask for volume discount and you can get an USER MANUAL for free
you are pathetic papamoi  
----------------
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
---------------------


that made my day  
How do you expect to make any BTC related business when you do miss the basics
Any way make a group buy and collect 2 or 3 times from what you are going to pay because of volume discount. This is the only thing which brainless idiot ca do
The questions is how many brainless idiots (bigger than you)  are left to send you their BTC

Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear  

But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software.

I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up  

I am thankful in behalf of papmoi

Thank you vey much Unacceptable

Papamoi, as you see even morons can cope with such things. I am wondering if bigger idiot theory still works Or you papamoi are the biggest idiot of them all

[papamoi]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

[Unacceptable]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too

[papamoi]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too

bitminter, and else

[Unacceptable]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too

bitminter, and else

Ok,give me a little while,I'm mining there now to see what works    It connected & started mining,but makin sure I get full power!! 

stratum+tcp://mint.bitminter.com:3333  is what I'm using...for the moment.

[papamoi]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too

bitminter, and else

Ok,give me a little while,I'm mining there now to see what works    It connected & started mining,but makin sure I get full power!!  

stratum+tcp://mint.bitminter.com:3333  is what I'm using...for the moment.

did you had to manage anything in the router port?
so stratum+tcp is fine?

maybe the issue of rebooting is coming from my psu...

[Unacceptable]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too

bitminter, and else

Ok,give me a little while,I'm mining there now to see what works    It connected & started mining,but makin sure I get full power!!  

stratum+tcp://mint.bitminter.com:3333  is what I'm using...for the moment.

did you had to manage anything in the router port?
so stratum+tcp is fine?

maybe the issue of rebooting is coming from my psu...

Why mess with the router  I found some pools just don't like some miner units too so theres that   My Klondikes didn't like slush's pool at all  

No issues at all....except ATM getting 154GH,instead of 179    

But its early still,I'll give it an hour or so,I got a few satoshi's I want outta there anyhow  

Edit:Workin fine!! 179GH showin on Bitminter 

What PSU are you using Model #  

[loshia]

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?


some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too

bitminter, and else

I am faltered papamoi I am wandering when the turn of your ass will come? Oh yeah i forgot your ass is too busy to hash with such many chips inside, and me licking your ass can cause surge in fart pressure which will prevent chips from hashing. Since this is the only one working project you have at the moment we are not going to allow this to happen
papamoi:some told me they have remove the stratum+tcp
What makes your idiot are your own actions and you have to take the consequences of them
What makes a BRAINLESS idiot is that you do not even think what someone told you as we can see
What if the same guy told you that you are brainless idiot? i am sure that he will be quite right about it
papamoj:Beside this gay loashia who keep on licking everybody ass
You know papamoi that everybody as you say are CONSTANTLY telling you that you are COMPLETE BRAINLESS IDIOT, but they use more soft words to explain what they think. More over i am damn sure that no matter how deeply i wish to lick their ass they will not allow me to do it
Which means that you are brainless idiot and i am not an ass licker