2.1T 900W, Innosilicon Blake256 D9 DecredMaster/ 3.83T 1380W, S11 SiaMaster

[cyberdeity]

Heads up S11 owners - new firmware available today on Innosilicon's support site

[i_like_bits]

Heads up S11 owners - new firmware available today on Innosilicon's support site

What are the improvements? Higher hash or lower power consumption?

[CNoteFan]

Here's the root user hash for anyone who can crack it.  This should allow us to SSH into our own devices.

$6$LDl3NtVWLpmGp1$52ivJuFI39PLeUerTxouNpwZn/WsJNlxhvQyUwPjJdxnoo2f93D1d904xFefd91qVWWjrC2jnj7Xz5oMaWAep1

[cyberdeity]

Heads up S11 owners - new firmware available today on Innosilicon's support site

What are the improvements? Higher hash or lower power consumption?

I have not noticed any appreciable change in hashrate.  The only difference I have seen so far is that the auto-adjusting fan speed is now higher.  Before my fans were running at like 45%, now they're running at 75%.  So, I guess you could say slightly higher power usage in return for keeping the chips a couple degrees cooler which theoretically might help with long-term reliability.   BTW, I run mine in performance mode, so your results may differ if you run yours in one of the other modes available.

[Inno_ASIC]

Dear S11 customers, through unremitting efforts, we release S11 new firmware. It can help your S11 run with around 4.3T.
http://www.innosilicon.com.cn/download/S11_20180626_074237.swu

[hawkfish007]

Dear S11 customers, through unremitting efforts, we release S11 new firmware. It can help your S11 run with around 4.3T.
http://www.innosilicon.com.cn/download/S11_20180626_074237.swu

Poolside showing 3.5 TH but miner dashboard showing a constant flat line 4.2 TH, and the miner is on Autotune mode indefinitely. Has the firmware been tested prior to release?

[Kalyst69]

Dear S11 customers, through unremitting efforts, we release S11 new firmware. It can help your S11 run with around 4.3T.
http://www.innosilicon.com.cn/download/S11_20180626_074237.swu

Poolside showing 3.5 TH but miner dashboard showing a constant flat line 4.2 TH, and the miner is on Autotune mode indefinitely. Has the firmware been tested prior to release?

I agree, I have updated some days ago and I noticed that on the pool, the hashrate is still around 3.8 per unit

[KashHappy]

Dear S11 customers, through unremitting efforts, we release S11 new firmware. It can help your S11 run with around 4.3T.
http://www.innosilicon.com.cn/download/S11_20180626_074237.swu

Are there plans for another D9 update in the near future? I tested the previous firmware running on Balanced, Factory, and Performance and did not see any noticeable improvements from 2.3Ths.

[ricecooker]

Quick question, what's the average uptime on your D9's? I'm getting around 18 hours - 2 days between resets, not sure if it is normal behaviour.

[nastyrunner]

Quick question, what's the average uptime on your D9's? I'm getting around 18 hours - 2 days between resets, not sure if it is normal behaviour.

Same is happening for me! It automatically restarts, I think that is the issue with my A4+'s too. It keeps restarting all of a sudden. For D9, one of my boards stopped working automatically as well. Had to send it to China for warranty. Waiting to hear from them.

[Andartis]

Quick question, what's the average uptime on your D9's? I'm getting around 18 hours - 2 days between resets, not sure if it is normal behaviour.

Same is happening for me! It automatically restarts, I think that is the issue with my A4+'s too. It keeps restarting all of a sudden. For D9, one of my boards stopped working automatically as well. Had to send it to China for warranty. Waiting to hear from them.

One of my hashboards also stopped working. Did you talk to support? I will have to check tomorrow, maybe its just some problem with a contact or so.
What about customs, if you return a unit for warranty?

[nastyrunner]

Quick question, what's the average uptime on your D9's? I'm getting around 18 hours - 2 days between resets, not sure if it is normal behaviour.

Same is happening for me! It automatically restarts, I think that is the issue with my A4+'s too. It keeps restarting all of a sudden. For D9, one of my boards stopped working automatically as well. Had to send it to China for warranty. Waiting to hear from them.

One of my hashboards also stopped working. Did you talk to support? I will have to check tomorrow, maybe its just some problem with a contact or so.
What about customs, if you return a unit for warranty?

I tried with other wire, and everything possible, nothing helped. In the end contacted the support. I sent it via normal post, as DHL from my country was $150+. So didn't have to declare any price.

[ricecooker]

Quick question, what's the average uptime on your D9's? I'm getting around 18 hours - 2 days between resets, not sure if it is normal behaviour.

Same is happening for me! It automatically restarts, I think that is the issue with my A4+'s too. It keeps restarting all of a sudden. For D9, one of my boards stopped working automatically as well. Had to send it to China for warranty. Waiting to hear from them.

Yeah I emailed support, they said it shouldn't reboot unless it runs into some kind of problem. But there could be hundreds of possible problems not just the miner itself. Did you buy your D9 direct from them? It will take weeks if not months sending there and back and that's downtime = loss. How do you find the customer service from Innosilicon?

[an9876543210]

Hi. I was running s11 and I'am quite sure that i was using this url for siamining pool but now it says  that the url is not correct.

asia.siamining.com:3333 or  eu.siamining.com:3333

I tried to change pools but when i went back to siamining pool it is giving me error with wrong url.

Can someone guide me to the correct url.

Thank you

[hawkfish007]

Hi. I was running s11 and I'am quite sure that i was using this url for siamining pool but now it says  that the url is not correct.

asia.siamining.com:3333 or  eu.siamining.com:3333

I tried to change pools but when i went back to siamining pool it is giving me error with wrong url.

Can someone guide me to the correct url.

Thank you

Did you add stratum+tcp:// before asia.siamining.com:3333? Inno miners require stratum+tcp:// added in front of the pool address.

[nastyrunner]

Quick question, what's the average uptime on your D9's? I'm getting around 18 hours - 2 days between resets, not sure if it is normal behaviour.

Same is happening for me! It automatically restarts, I think that is the issue with my A4+'s too. It keeps restarting all of a sudden. For D9, one of my boards stopped working automatically as well. Had to send it to China for warranty. Waiting to hear from them.

Yeah I emailed support, they said it shouldn't reboot unless it runs into some kind of problem. But there could be hundreds of possible problems not just the miner itself. Did you buy your D9 direct from them? It will take weeks if not months sending there and back and that's downtime = loss. How do you find the customer service from Innosilicon?

That sucks, For my A4+ problems, I had a good support team, but now they suck a lot more. I bought it from third party vendor, but their support helps by seeing the Serial Number!

[Weidley]

Is it somehow possible now to connect to nicehash?

You can:

stratum+tcp://blake256r14.usa.nicehash.com:3350
username: YourBitcoinAddress
password: x

But you won’t earn anything as there no orders for blake256r14 on nicehash.

Is it possible to mine the other blake, like blaker8 or r8vnl ? It`s seems that blake r8 has some buy orders.

[sweeperAA]

Don't know if you guys noticed but Inno released an updated firmware version for the D9 dated July 6. I had been running with it for a couple of days. It didn't fix the random reboots and it didn't provide any additional configuration options. It did seem to drop my hash rate without dropping power. I will be going back to the June firmware.

[mansello]

Don't know if you guys noticed but Inno released an updated firmware version for the D9 dated July 6. I had been running with it for a couple of days. It didn't fix the random reboots and it didn't provide any additional configuration options. It did seem to drop my hash rate without dropping power. I will be going back to the June firmware.

I have also downgraded the firmware to June firmware because I have not noticed nothing of better performance.

[CryptoPapst]

Don't know if you guys noticed but Inno released an updated firmware version for the D9 dated July 6. I had been running with it for a couple of days. It didn't fix the random reboots and it didn't provide any additional configuration options. It did seem to drop my hash rate without dropping power. I will be going back to the June firmware.

I have also downgraded the firmware to June firmware because I have not noticed nothing of better performance.

How can you downgrade the firmware?