Antminer B3 Bytom Mining First review

[gaalx01]

seems their website is flooded   - anyone willing to put the firmware on a mirror fileshare ? thx

Good idea  

I think first the upgrade and then the update

10BTM for the first one posting a mirror link

here you go guys

https://ufile.io/15cpb

https://ufile.io/n3z7v

checked, firmware work. Installed with a check mark Keep settings.

[chris-swiss]

seems their website is flooded   - anyone willing to put the firmware on a mirror fileshare ? thx

Good idea  

I think first the upgrade and then the update

10BTM for the first one posting a mirror link

here you go guys

https://ufile.io/15cpb

https://ufile.io/n3z7v

thanks a lot

[chris-swiss]

Have use the file on bitcointalk after my update all its discarded , be careful with this file , because my b2 2hour run but no profit on ant pool , i hope you have control you hashrate with your pool

[Mo20]

Have use the file on bitcointalk after my update all its discarded , be careful with this file , because my b2 2hour run but no profit on ant pool , i hope you have control you hashrate with your pool

I had the same issue. What I did to fix it is switch the main pool from (stratum-btm.antpool.com:6666) to (stratum-btm.antpool.com:443).

[chris-swiss]

Have use the file on bitcointalk after my update all its discarded , be careful with this file , because my b2 2hour run but no profit on ant pool , i hope you have control you hashrate with your pool

I had the same issue. What I did to fix it is switch the main pool from (stratum-btm.antpool.com:6666) to (stratum-btm.antpool.com:443).

Have change and don't work with me have 9 accepted and 13 rejected, i look to switch pool

[chris-swiss]

Have use the file on bitcointalk after my update all its discarded , be careful with this file , because my b2 2hour run but no profit on ant pool , i hope you have control you hashrate with your pool

I had the same issue. What I did to fix it is switch the main pool from (stratum-btm.antpool.com:6666) to (stratum-btm.antpool.com:443).

thanks for your reply

[chris-swiss]

For me have make switch address pool and have use my backup and now its working. so if just switch address pool don't work make your backup and after switch pool and its fine

thanks Mo20 for your answer , when have merit on my account one its for you .

[Mesterlovesz1974]

Hi Guys, I have a B3 as well. I am glad that it has a new firmware and we can set the fanspeed. But it is a fact, that the fan is way more than it needed. About the Artic Cooling Fan. Its not a good choice as it has only 53 CFM arflow, which is way too low for any Antminer. The original fans has 200 CFM or more, depend on the antminer model.

As the B3 ha only 2 boards and they using a low frequency, you can use a Cooler Master Jetflo 120 which has 120 CFM and relatively cheap. I used it on one of my older BTC asic.

[Philopolymath]

@CoinPunk

"Im certain I bought more than YOU"..

Oh? Really?....My electricity bill was $4500 last month...Without the new B3's S9's B29's A8+

[Andartis]

Hi Guys, I have a B3 as well. I am glad that it has a new firmware and we can set the fanspeed....

Did I miss that? Where can I set that?

[Chris75kb]

Hi Guys, I have a B3 as well. I am glad that it has a new firmware and we can set the fanspeed....

Did I miss that? Where can I set that?

https://shop.bitmain.com/support.htm?pid=00720180519161243572MB78lOGz067A

[Andartis]

Did that update. I can not set fanspeed

[Mo20]

Did that update. I can not set fanspeed

Yep you can't set fan speed. However, you can see current fan speed after the update.

[dnssandbox]

Did that update. I can not set fanspeed

Yep you can't set fan speed. However, you can see current fan speed after the update.

you CAN set fan speed. there is an easy and a permanent way by using SSH.
Here is the Easy Way
1.
Use FireFox Browser or Safari if you have a MAC
go to the D3 Miner Configuration/General Settings, screen
Use the inspector to find #fan_control
change "display:none" to "display"

Once that is changed, it will display that Fan option and you can easily change the setting to whatever you want.
I changed mine to 55%
My fans are running at 3960, and my temps are 36-40.
I could have easily gone lower, but my fans are so much quieter now that I don't need to. Even after rebooting, my fan settings stay.


i didn't post the permanent way because I don't want to be responsible for anyone bricking their unit if they aren't familiar with SSH

[Mo20]

Did that update. I can not set fanspeed

Yep you can't set fan speed. However, you can see current fan speed after the update.

you CAN set fan speed. there is an easy and a permanent way by using SSH.
Here is the Easy Way
1.
Use FireFox Browser or Safari if you have a MAC
go to the D3 Miner Configuration/General Settings, screen
Use the inspector to find #fan_control
change "display:none" to "display"

Once that is changed, it will display that Fan option and you can easily change the setting to whatever you want.
I changed mine to 55%
My fans are running at 3960, and my temps are 36-40.
I could have easily gone lower, but my fans are so much quieter now that I don't need to. Even after rebooting, my fan settings stay.


i didn't post the permanent way because I don't want to be responsible for anyone bricking their unit if they aren't familiar with SSH

What about overclocking? I tried overclocking but overclock settings don't apply for some reason.

[Shitcointalk]

you CAN set fan speed. there is an easy and a permanent way by using SSH.
Here is the Easy Way
1.
Use FireFox Browser or Safari if you have a MAC
go to the D3 Miner Configuration/General Settings, screen
Use the inspector to find #fan_control
change "display:none" to "display"

Once that is changed, it will display that Fan option and you can easily change the setting to whatever you want.
I changed mine to 55%
My fans are running at 3960, and my temps are 36-40.
I could have easily gone lower, but my fans are so much quieter now that I don't need to. Even after rebooting, my fan settings stay.


i didn't post the permanent way because I don't want to be responsible for anyone bricking their unit if they aren't familiar with SSH

Thanks a lot for that.

What about overclocking? I tried overclocking but overclock settings don't apply for some reason.

I was wondering the same ! hahaha

[CoinPunk]

@CoinPunk

"Im certain I bought more than YOU"..

Oh? Really?....My electricity bill was $4500 last month...Without the new B3's S9's B29's A8+

Awesome! I used to have that problem. Sounds as if were close actually lol Windmills and SolarPower. A/H cap for dayz...

Ok so has "anyone" gotten a payment yet?.. Im starting to think this is totally intentional at this point. As they know darn well that the BTM will drop like a rock if they pay all of us at once now... We know that their sitting on a lot now.. Look at our balances...
Get ready for a spoon feeding....  Do we collectively have 51% yet lolol Someone build a node quick.. Now would'nt that be a lesson....I know j/k someone might believe it... lolol

So whos gotten paid?..............12:07am--- 5/20/2018...........>BYTOM......."AirPool".... (<--I want cred for that ya heard it here first)

[chris-swiss]

no receveid payement for me , but on 16 may antpool have explain you can use 2 wallet erc20 and bytes, with my siacoin mining its writing paid , with bytom its writing payement so i think its problem to antpool , just wait and monday i open a ticket for payement process

[BoC_2017]

no receveid payement for me , but on 16 may antpool have explain you can use 2 wallet erc20 and bytes, with my siacoin mining its writing paid , with bytom its writing payement so i think its problem to antpool , just wait and monday i open a ticket for payement process

See what I posted regarding Antpool and payment - Post #326.

[chris-swiss]

no receveid payement for me , but on 16 may antpool have explain you can use 2 wallet erc20 and bytes, with my siacoin mining its writing paid , with bytom its writing payement so i think its problem to antpool , just wait and monday i open a ticket for payement process

See what I posted regarding Antpool and payment - Post #326.

thanks for your reply at this moment 2 pool have make payement just on bytom wallet , on antpool all with erc20 have problem to pending payement . i hope can change soon on antpool
its better for me to use erc20 for security because i use ledger nano s and myetherwallet