[ANN][DOGE] Dogecoin - very currency many coin - v1.10.0

[kronicblazer]

guys! What is your opinion on http://doge.cryptopool.it/ I have mined there for a while, earned over 400.000 DOGE, wchich are still in pool.After 4 days after withdrawal I am unable to get my DOGE ... Are they honest?

WTF?

The queue for withdrawal is long, and I think it requires manual action by the pool op. I haven't gotten my last in a long time, but I mined there for a while with regular payouts, so I think he's honest, just a bit behind.

I have this same problem too.  Been trying to withdraw for past 2 days, and keeps saying 1 manual withdrawal pending.  Auto does not work at all.  Hopefully we will get the coins soon, I have lost  most of my coins on different pools mining dogecoins last couple days from pool downtimes, incorrect payments and just not getting paid

[BitcoinEXpress]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

[viatorek]

guys! What is your opinion on http://doge.cryptopool.it/ I have mined there for a while, earned over 400.000 DOGE, wchich are still in pool.After 4 days after withdrawal I am unable to get my DOGE ... Are they honest?

WTF?

The queue for withdrawal is long, and I think it requires manual action by the pool op. I haven't gotten my last in a long time, but I mined there for a while with regular payouts, so I think he's honest, just a bit behind.

I have this same problem too.  Been trying to withdraw for past 2 days, and keeps saying 1 manual withdrawal pending.  Auto does not work at all.  Hopefully we will get the coins soon, I have lost  most of my coins on different pools mining dogecoins last couple days from pool downtimes, incorrect payments and just not getting paid

[Selling7970]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

I'm using 3.7.2. Could it be the culprit? Let me try it out.

[gencoinx]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

I'm using 3.7.2. Could it be the culprit? Let me try it out.

I'm also using 3.7.2 for my 280x and getting good khs, is 3.7.0 much better?

[komrobert]

DOGE is starting to rocket, I could see. The buy wall are getting stacked and sells are going away. DOGE/LTC is already starting to go up slowly

[kronicblazer]

guys! What is your opinion on http://doge.cryptopool.it/ I have mined there for a while, earned over 400.000 DOGE, wchich are still in pool.After 4 days after withdrawal I am unable to get my DOGE ... Are they honest?

WTF?

The queue for withdrawal is long, and I think it requires manual action by the pool op. I haven't gotten my last in a long time, but I mined there for a while with regular payouts, so I think he's honest, just a bit behind.

I have this same problem too.  Been trying to withdraw for past 2 days, and keeps saying 1 manual withdrawal pending.  Auto does not work at all.  Hopefully we will get the coins soon, I have lost  most of my coins on different pools mining dogecoins last couple days from pool downtimes, incorrect payments and just not getting paid

is finding blocks in p2p pools consistant?  I only have 600-650kh on my 280x.  Will I be getting more coins?  I am currently mining at http://doge.netcodepool.org/ right now.  Been the most stable and consistant from all the mining pools I tried last couple days.

[digitaltradz]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

I'm using 3.7.2. Could it be the culprit? Let me try it out.

I'm also using 3.7.2 for my 280x and getting good khs, is 3.7.0 much better?

change -g 1 to -g 2 it makes a big difference and add --lookup-gap 2  3.7.x are the last to support scrypt and I found them unstable over the long run.  I use 3.5.0 and have no problems.  Both my 7850 and 7870 average 300-325.

[komrobert]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

I'm using 3.7.2. Could it be the culprit? Let me try it out.

I'm also using 3.7.2 for my 280x and getting good khs, is 3.7.0 much better?

I think he meant 3.7.x in general, anything after that won't work at all(no more gpu mining in 3. I used 3.3.1 and 3.7.2 getting same results(within 2%)

[noises]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

I'm using 3.7.2. Could it be the culprit? Let me try it out.

I'm also using 3.7.2 for my 280x and getting good khs, is 3.7.0 much better?

change -g 1 to -g 2 it makes a big difference and add --lookup-gap 2  3.7.x are the last to support scrypt and I found them unstable over the long run.  I use 3.5.0 and have no problems.  Both my 7850 and 7870 average 300-325.

Changing from -g 1 to -g2 made me lost 120Kh/s on my 7970

[filthyrake]

just a reminder!!!

over at www.gooddoge.com we are still looking to hit our first block, so I am offering up a crazy 100k DOGE bonus to whoever finds the first one!

I know, I'm a crazy person!!

All for the DOGE

[cryptoBoomer]

http://cryptoboss.com/doge_gold.jpg

[JsonBorn]

CryptoBoomer that logo is better. The cutest doge

[Selling7970]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting at least 320kh!

Everybody's saying I should get 300kh more. Any suggestions?

It's a Dell XPS 8700 with i74770 and a XFX R7850 core edition.
I did have some issues installing the GPU (some beeps during boot), but it stills runs fine.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

this will get you 315 khs on that card, use exact setting  and let me know what you get. Also make sure you are using CGminer 3.7.0 or earlier. CGminer 3.8.0 sucks Doge turds for mining Dogecoin LOL.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 8192 -I 13 -g 1 -w 256


~BCX~

I'm using 3.7.2. Could it be the culprit? Let me try it out.

I'm also using 3.7.2 for my 280x and getting good khs, is 3.7.0 much better?

I think he meant 3.7.x in general, anything after that won't work at all(no more gpu mining in 3. I used 3.3.1 and 3.7.2 getting same results(within 2%)

To make everything worse, unless I run with a -T, the screen is just blank. Am I doing wrong?

[viatorek]

guys! What is your opinion on http://doge.cryptopool.it/ I have mined there for a while, earned over 400.000 DOGE, wchich are still in pool.After 4 days after withdrawal I am unable to get my DOGE ... Are they honest?

WTF?

The queue for withdrawal is long, and I think it requires manual action by the pool op. I haven't gotten my last in a long time, but I mined there for a while with regular payouts, so I think he's honest, just a bit behind.

I have this same problem too.  Been trying to withdraw for past 2 days, and keeps saying 1 manual withdrawal pending.  Auto does not work at all.  Hopefully we will get the coins soon, I have lost  most of my coins on different pools mining dogecoins last couple days from pool downtimes, incorrect payments and just not getting paid

is finding blocks in p2p pools consistant?  I only have 600-650kh on my 280x.  Will I be getting more coins?  I am currently mining at http://doge.netcodepool.org/ right now.  Been the most stable and consistant from all the mining pools I tried last couple days.

on p2pool yes its possible you will get more then regular mine...but you need a good card and mine constant to get better results

[roastbeef]

Am I doing something wrong? Getting 100kh/s with a 7850?

Am I off? Or it's normal?

Thanks!

You should be getting around 300 if you push it.  What's your cgminer conf or bat file look like? I've got one too.

cgminer.exe --scrypt  -o stratum+tcp://doge.scryptpools.com:3333 -u xxxxxx -p xxxxx  --thread-concurrency 4096 -I 11 -g 1 -w 256 -T

Do I need a conf besides this bat?

[MajikPiG]

addnode=95.85.29.144
addnode=162.243.113.110
addnode=146.185.181.114
addnode=188.165.19.28
addnode=78.46.57.132

Are these the latest nodes for dogecoin.conf?

[viatorek]

yea they still work why?

[viatorek]

Wow, those sell walls are huge(10 btc each usually) but they get eaten up very fast, hopefully it is not the same guy trying to make the volume look huge. By the way, 300 likes have been achieved on Cryptsy's DOGE petition, yay:)

Let's get to 1000!

TO VOTE FOR DOGE ON CRYPTSY:

Register here (if you don't already have an account with Cryptsy)
http://goo.gl/eaiO5w

LIKE HERE
http://goo.gl/QAf2TF

VOTED! with all my gmail accounts lol

[BitcoinEXpress]

VOTED! with all my gmail accounts lol

and I used all my photshop skillz LOL





~BCX~