lajz99 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 29, 2013, 08:21:47 PM |
|
Please feel free to share any tips and tricks related to the AntMiner U1 USB! I was having issues getting more than 1 USB to run at a time - tip from iluvspcs/BTCjoe IMO the drivers from AntMan on the github for cgminer works, but it needs some tweaking. I shipped a unit to a developer who works on a few of the builds for CG and BFG miner software for his input. BTCjoe sent this over to get multiples working - here's his trick:
With CGminer is running, add one in and then use Zadig to reinstall the driver for the one you just added. You kind of have to keep an eye on which one just popped up in the drop down list of Zadig because it doesn't really tell you which one is the new one you just plugged in.
While CGminer is still running, after you reinstall the driver with Zadig, pull it out for a few seconds and plug it back in.. and CGminer will find it and run it..
|
|
|
|
fasmax
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 05:13:25 AM |
|
Any one got their U1 working on a RasPi?
|
|
|
|
lajz99 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 05:14:56 AM |
|
or overclocked?
|
|
|
|
fasmax
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 06:37:10 AM |
|
I have my unit running with the prebuilt windows version. I have it over clocked to 275mhz and the resulting hash rate reported by CGM is about 2.18ghs WU27.1/m. I am seeing a high error rate (around 10%). Strange thing is I seem to get this error rate no matter what clock rate I have tried.
|
|
|
|
lajz99 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 06:50:47 AM |
|
I have my unit running with the prebuilt windows version. I have it over clocked to 275mhz and the resulting hash rate reported by CGM is about 2.18ghs WU27.1/m. I am seeing a high error rate (around 10%). Strange thing is I seem to get this error rate no matter what clock rate I have tried.
What do you adjust in the settings? I'm running with cgminer.exe --bmsc-options 115200:20 -o -- bmsc-freq 0781
|
|
|
|
fasmax
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 07:30:39 AM |
|
Running with cgminer.exe --bmsc-freq 0A81 -o xxx -u xxx -p xxx
|
|
|
|
ninjaboon
Legendary
Offline
Activity: 2128
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 01:19:25 PM |
|
Please feel free to share any tips and tricks related to the AntMiner U1 USB! I was having issues getting more than 1 USB to run at a time - tip from iluvspcs/BTCjoe IMO the drivers from AntMan on the github for cgminer works, but it needs some tweaking. I shipped a unit to a developer who works on a few of the builds for CG and BFG miner software for his input. BTCjoe sent this over to get multiples working - here's his trick:
With CGminer is running, add one in and then use Zadig to reinstall the driver for the one you just added. You kind of have to keep an eye on which one just popped up in the drop down list of Zadig because it doesn't really tell you which one is the new one you just plugged in.
While CGminer is still running, after you reinstall the driver with Zadig, pull it out for a few seconds and plug it back in.. and CGminer will find it and run it..
seriously looks tricky. not sure if I want to buy U1 or S1 miners now.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 04:02:59 PM |
|
hmm, the zadig drivers were a poblem for me with block erupters too though - i had to run the driver for each usb port on my computer, if not every port on the hub as well.
are the drivers the same win11 or whatever its called?
|
|
|
|
|
Seals881
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 30, 2013, 09:57:42 PM |
|
I have my unit running with the prebuilt windows version. I have it over clocked to 275mhz and the resulting hash rate reported by CGM is about 2.18ghs WU27.1/m. I am seeing a high error rate (around 10%). Strange thing is I seem to get this error rate no matter what clock rate I have tried.
What do you adjust in the settings? I'm running with cgminer.exe --bmsc-options 115200:20 -o -- bmsc-freq 0781 The Github for Antminer has a guide with all the settings you could adjust for the U1. It was very helpful for me!
|
|
|
|
iluvpcs
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 314
Merit: 250
:)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 02:46:07 AM Last edit: December 31, 2013, 04:59:09 AM by iluvpcs |
|
Update, helped a new MAC user over WebEx tonight with Parallels, and after figuring out his pool was wrong, and having to use
"cgminer.exe --bmsc-options 115200:20 --bmsc-freq 0781"
to start it mining, we got him up and working just fine. So note to MAC's it does work on your hardware too (using Windows Emulation)!
|
|
|
|
quicksilv3r
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 132
Merit: 100
http://INVESTNCRYPTO.COM
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 04:18:16 AM |
|
running 0981 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi44.tinypic.com%2Fxn4yh3.png&t=665&c=xxpm-F4HzXgqOA)
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 04:29:05 AM |
|
So whatever happened to the -S option in cgminer? Is it possible to run these without the zadig driver? USB BE would work just fine without it, back in the day when you could manually specify which devices to use. Is it still possible to manually specify which devices to use, instead of assuming cgminer knows what you want?
|
|
|
|
iluvpcs
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 314
Merit: 250
:)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 05:00:49 AM |
|
CGMINER -n
look for the Bus and Device .USB dev 1: Bus 1 Device 14 ID: 0403:6014 Manufacturer: 'Butterfly Labs'
Then to use only that device (or devices) do
cgminer --usb 1:14
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 05:20:03 AM |
|
okay my pc ran tons of am sticks so my cp210x-vcp driver is installed.
so I go to zadig? and reinstall the driver?
|
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 05:44:35 AM |
|
CGMINER -n
look for the Bus and Device .USB dev 1: Bus 1 Device 14 ID: 0403:6014 Manufacturer: 'Butterfly Labs'
Then to use only that device (or devices) do
cgminer --usb 1:14 Detects my U1 and my USB BE. Well, it knows they're plugged in but doesn't know what they are (Failed to open, err -12). CGMiner 3.1.1 doesn't care, just uses the BE anyway because I tell it to explicitly. Didn't have much luck with zadig when I was messing with it a few months ago, don't want to mess with it again.
|
|
|
|
iluvpcs
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 314
Merit: 250
:)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 01:32:18 PM |
|
I think BEs and The U1s don't coexist well on same machine yet with the custom build of cgminer for the u1s. Anyone have them both running together ok?
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 03:03:33 PM |
|
running 0981 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi44.tinypic.com%2Fxn4yh3.png&t=665&c=xxpm-F4HzXgqOA) impressive ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) how hot does it get at 2GHS?
|
|
|
|
drmadison
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 31, 2013, 05:08:35 PM |
|
Hopefully they'll get their support merged into the mainline BFGMiner/CGMiner soon so those of us NOT running windows to mine can't start using these!
|
|
|
|
|