[ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★

[Spoetnik]

since the pool is back up now i seen on Twitter i have tried on and off last hour or two..
i am not getting anything submitted or rejected and what is funny is am not seeing a message
about Stratum detecting a block.. not even 1 time.
Now if i go to another pool with my cudaminer and same config i get no shares accepted
but i do see detecting new block a lot.. and yet again no shares accepted
and i was getting TONS of shares accepted first thing this morning on that other pool
BUT i think i can't now on that other pool simply because there is FAR too many miners and diff went way up..

IT WAS WORKING all last night and this morning and recently don't anymore and only the pools and network changed !

Although on that other pool my ATI 7950 never did stop accepting shares like my nvidia did..
so i think if i moved it over to 1GH it would work and get shares submitted.
ALSO i was using an Intel 4770K cpu mining and could always get shares accepted
and now just like my Nvidia card (550Ti) that was doing 40MH/s it won't get 1 share accepted at all.

so.. point is i am wondering if there is something wrong with the pool now ? i get no blocks detected when doing 40MH/s on nvidia

[gg234]

Block explorer it is showing but not in my wallet can you please help how to see them.

For max coin it shows as follows

Total Earnings
1.8804 MAX Paid
0.0347 MAX Current balance
Payouts are made automatically when reaching 0.1 MAX.

When i went back and checked in my maxcoind to get the balace it shows 0.0000 instead of 1.8804 which was paid by 1Gh

Is it correct

Please look up your payment transaction (from the list of payments to your account) on the blockchain explorer. If your payment is listed in this transaction, something is wrong with your wallet. If not, please contact me so I could investigate the problem.

[superfluouso]

Is everyone getting seemingly low hashrates with the cgminer?  Each of my 7970's are only getting around 350mh/s each where I would normally expect 750 each.  Is this normal?

[thisisnotmyltcusername]

Is everyone getting seemingly low hashrates with the cgminer?  Each of my 7970's are only getting around 350mh/s each where I would normally expect 750 each.  Is this normal?

yes, it's neither scrypt or SHA256 but modded keccak

[superfluouso]

Is everyone getting seemingly low hashrates with the cgminer?  Each of my 7970's are only getting around 350mh/s each where I would normally expect 750 each.  Is this normal?

yes, it's neither scrypt or SHA256 but modded keccak

Thanks for the response - I suspected as much but was having difficulty locating confirmation of that....time to throw on another rig

[trad3god]

since the pool is back up now i seen on Twitter i have tried on and off last hour or two..
i am not getting anything submitted or rejected and what is funny is am not seeing a message
about Stratum detecting a block.. not even 1 time.
Now if i go to another pool with my cudaminer and same config i get no shares accepted
but i do see detecting new block a lot.. and yet again no shares accepted
and i was getting TONS of shares accepted first thing this morning on that other pool
BUT i think i can't now on that other pool simply because there is FAR too many miners and diff went way up..

IT WAS WORKING all last night and this morning and recently don't anymore and only the pools and network changed !

Although on that other pool my ATI 7950 never did stop accepting shares like my nvidia did..
so i think if i moved it over to 1GH it would work and get shares submitted.
ALSO i was using an Intel 4770K cpu mining and could always get shares accepted
and now just like my Nvidia card (550Ti) that was doing 40MH/s it won't get 1 share accepted at all.

so.. point is i am wondering if there is something wrong with the pool now ? i get no blocks detected when doing 40MH/s on nvidia

same here using cpuminer on windows...lots of hashes no accepting or denying

[oliversl]

Whats the pool hashrate?

[adrianmh6]

Does anyone know why I cant mine maxcoin at max1gh.com with this start file? Im using cgminer 3.6.6 to run 2 7950's. The mining window keeps scrolling but says    keccak is not recognized as an internal or external command???  Thanks fro any help!


@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours. You also need to
@echo change the number of threads that the miner should use.
@echo

:loop

--keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x



@echo Ooops
goto loop

[oliversl]

ad minerd at the start of the command line:

Code:

minerd --keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x 

Does anyone know why I cant mine maxcoin at max1gh.com with this start file? Im using cgminer 3.6.6 to run 2 7950's. The mining window keeps scrolling but says    keccak is not recognized as an internal or external command???  Thanks fro any help!


@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours. You also need to
@echo change the number of threads that the miner should use.
@echo

:loop

--keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x



@echo Ooops
goto loop

[DeeSome]

ad minerd at the start of the command line:

Code:

minerd --keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x 

Does anyone know why I cant mine maxcoin at max1gh.com with this start file? Im using cgminer 3.6.6 to run 2 7950's. The mining window keeps scrolling but says    keccak is not recognized as an internal or external command???  Thanks fro any help!


@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours. You also need to
@echo change the number of threads that the miner should use.
@echo

:loop

--keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x



@echo Ooops
goto loop

He's using cgminer, not cpuminer, will minerd work?

[adrianmh6]

ad minerd at the start of the command line:

Code:

minerd --keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x 

Does anyone know why I cant mine maxcoin at max1gh.com with this start file? Im using cgminer 3.6.6 to run 2 7950's. The mining window keeps scrolling but says    keccak is not recognized as an internal or external command???  Thanks fro any help!


@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours. You also need to
@echo change the number of threads that the miner should use.
@echo

:loop

--keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x



@echo Ooops
goto loop

He's using cgminer, not cpuminer, will minerd work?

Thanks for the help but that didnt work. Either has cgminer.exe      Any other Ideas?

[oliversl]

try:
https://twitter.com/maxcoinproject

ad minerd at the start of the command line:

Code:

minerd --keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x 

Does anyone know why I cant mine maxcoin at max1gh.com with this start file? Im using cgminer 3.6.6 to run 2 7950's. The mining window keeps scrolling but says    keccak is not recognized as an internal or external command???  Thanks fro any help!


@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours. You also need to
@echo change the number of threads that the miner should use.
@echo

:loop

--keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mNh1wmeV4RMgFfZmqHZ7AG8QYQ3uit4xLh -p x



@echo Ooops
goto loop

He's using cgminer, not cpuminer, will minerd work?

Thanks for the help but that didnt work. Either has cgminer.exe      Any other Ideas?

[lonyyi]

Please!!
I am using BAMT with cgminer 3.7.2.
Need detailed instructions on how to install the open source linux GPU mining from max.1gh.com that has cgminer with keccak support.
If anyone can direct me to instructions?
Thank You!!!

[doona38317]

Need some help!

http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.20819464046508074

I download this one and the cgminer crash once a hour.
Has anyone the same case like me?

[R9Generation]

Please!!
I am using BAMT with cgminer 3.7.2.
Need detailed instructions on how to install the open source linux GPU mining from max.1gh.com that has cgminer with keccak support.
If anyone can direct me to instructions?
Thank You!!!

Same here!

[stevekr]

http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.20819464046508074

I download this one and the cgminer crash once a hour.
anyone like me?

Same here but every 3 hrs or so it just stops. Wasn't too happy this morning to find I'd mined sweet fa all night!

[belltown]

http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.20819464046508074

I download this one and the cgminer crash once a hour.
anyone like me?

Same here but every 3 hrs or so it just stops. Wasn't too happy this morning to find I'd mined sweet fa all night!

Solution: reduce intensity and it will stop crashing. I went from 13 down to 9 and no crashes for 12 hours.

[stevekr]

http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.20819464046508074

I download this one and the cgminer crash once a hour.
anyone like me?

Same here but every 3 hrs or so it just stops. Wasn't too happy this morning to find I'd mined sweet fa all night!

Solution: reduce intensity and it will stop crashing. I went from 13 down to 9 and no crashes for 12 hours.

It's only set to I 5 so isn't that high and getting up 70c on 7950.

[Skolte]

what's the xpt port of 1GH.COM ?

[reorder]

what's the xpt port of 1GH.COM ?

xpt is only supported for PTS, you can find ports and connection settings for yam on http://pts.1gh.com