[ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★

[Wipeout2097]

Is there a XPT port for maxpool?

Not at the moment, but it is feasible to add it. Are there any XPT miners for max?

Yes, arOpenCLMax. I'm actually trying it since cgminer crashes on a Frankenstein rig I have. 

[reorder]

Is there a XPT port for maxpool?

Not at the moment, but it is feasible to add it. Are there any XPT miners for max?

Yes, arOpenCLMax. I'm actually trying it since cgminer crashes on a Frankenstein rig I have. 

Allright, will be adding it in couple days. Though, did you try running cgminer just on AMD and cudaminer on Nvidias if you have a mix?

[Wipeout2097]

Is there a XPT port for maxpool?

Not at the moment, but it is feasible to add it. Are there any XPT miners for max?

Yes, arOpenCLMax. I'm actually trying it since cgminer crashes on a Frankenstein rig I have.  

Allright, will be adding it in couple days. Though, did you try running cgminer just on AMD and cudaminer on Nvidias if you have a mix?

Yes I did. Cudaminer picks the GTX760 well, cgminer (or even sgminer) crash perhaps due to lack of system ram: just 1 GB. I need to find more DDR2.

if it's too much trouble, don't bother or provide your own MAX address so I can point some hash there

Edit: nevermind, it's working now

[Spoetnik]

372 working fine for me and my 7950 but i have been toying with settings though
because it's not very efficient and neither was the other older version..
problem is too many (in my opinion) shares are being detected as stale or rejected for being stale.
not sure if its just a side effect of the card being able to hash faster than my other miners with vardiff or what..
but my cudaminer and my cpu miner are working faaaar more efficiently and not wasting hashing.
my cudaminer is one giant mile long screen of steady non stop accepted shares.
and my cpu miner is pretty much the same.. then my 7950 using all kinds of settings always has that issue.

what ya all think ?

[reznor]

View this stats

Total MAXCOIN being mined 

http://stats.maxcoin.co.uk/stats.json

[DaveNYC1]

Finally threw the towel in and gave up on CPU mining.  5 days & .2027 maxcoins later.  

Switched over to Amazon servers with NVidia Grid K520 cards & can't get the cudaminer to work.

I connect via terminal services and run the cudaminer_start bat file (yes... have put my wallet info in there) it looks like it's trying to run but it gets stuck in a loop.

The following "cudaminer -1 K600x16 -a keccak -o stratum +tcp://maxpool.1gh.com:17333/ -u -p x   Ooops"

then "goto loop"

then repeats.

Anyone have any idea why?  Any and all help is greatly appreciated!

[drakoin]

Finally threw the towel in and gave up on CPU mining.  5 days & .2027 maxcoins later.  

Switched over to Amazon servers with NVidia Grid K520 cards & can't get the cudaminer to work.

I connect via terminal services and run the cudaminer_start bat file (yes... have put my wallet info in there) it looks like it's trying to run but it gets stuck in a loop.

The following "cudaminer -1 K600x16 -a keccak -o stratum +tcp://maxpool.1gh.com:17333/ -u -p x   Ooops"

then "goto loop"

then repeats.

Anyone have any idea why?  Any and all help is greatly appreciated!

Yes.

Here's what worked:

Code:

./CudaMiner/cudaminer -a keccak  -o stratum+tcp://erebor.dwarfpool.com:3339/ -p x -u mymaxcoinaddress -l K1000x32 -C 1

I have done the same while the difficulty was still much lower.
I got it to work in the end, and had it running for one night.

But then - 0.65 dollars / hour is more than you will make with the coins.

Do the calculations.
I got it up to 85000 khs cudaminer + 5000 khs cpuminer (5 threads only not to harm the GPU harvest)

If, however, it works out for you, consider donating some to me :-)

[VSym]

Great Work, I have been testing the new cgminer 3.7 with Win7 64, R9 270 and Catalyst 13.12. Runing without problems for about 12 h.
Hash rate and power consumption are similar to the 3.6.6 Version but he amount of Coins dropped. Did i miss a change in difficulty ?

[reorder]

Great Work, I have been testing the new cgminer 3.7 with Win7 64, R9 270 and Catalyst 13.12. Runing without problems for about 12 h.
Hash rate and power consumption are similar to the 3.6.6 Version but he amount of Coins dropped. Did i miss a change in difficulty ?

Please take a look at mining history on your stats page, important is your percentage of work. If that has changed significantly over the last day when the pool and network hashpower was constant (give or take, at least there were no 5x-10x jumps), something might be wrong.

[Armchair Miner]

Happy to report that 3.7.3 seems stable on my two configurations, i7 and amd (as described on previous page). Tested about 1 hour each.

I get 3% and 1% higher hash rates with the 3.7.3 for exactly the same configurations as with the 3.6.6.

[DaveNYC1]

@ drakoin -

Thanks for the reply however I do not belong to the dwarfcoin pool.  Were you trying to pull a fast one on me? 

What would be the advantage of using them instead of 1GH?

[reorder]

@ drakoin -

Thanks for the reply however I do not belong to the dwarfcoin pool.  Were you trying to pull a fast one on me? 

What would be the advantage of using them instead of 1GH?

I believe the important part in his post was the '-l K1000x32' thing, and he just copypasted the commandline that worked for him without editing

[DaveNYC1]

@reorder -

Thanks for the clarification... I will give that a try.   

[DaveNYC1]

@ drakoin & reorder -

Tried drakoin's command and it does nothing except bring me back to another prompt. Hmm

[Spoetnik]

@ drakoin & reorder -

Tried drakoin's command and it does nothing except bring me back to another prompt. Hmm

get rid of the loop crap..

you only need one line.
also verify the settings on the config for cudaminer and the build etc.. make sure it's correct .. see cudaminer topic for that.

also anyone have any thought on what i said ?
i want to know if anyone else is getting the same thing or what too..

[DaveNYC1]

@ spoetnik

Thanks for responding.  Removed everything else, ran & still nothing.

Searched for cudaminer here and got a bunch of garbage.

Can you or anyone confirm that all I need to mine are the 4 files found in the \cudaminer-2014-02-09\x64 directory that I downloaded from the 1GH main page last night?

They are:  cudaminer.exe, cudaminer_start.bat, cudart64_55.dll & pthreadVC2.dll

Thanks

[Spoetnik]

@ spoetnik

Thanks for responding.  Removed everything else, ran & still nothing.

Searched for cudaminer here and got a bunch of garbage.

Can you or anyone confirm that all I need to mine are the 4 files found in the \cudaminer-2014-02-09\x64 directory that I downloaded from the 1GH main page last night?

They are:  cudaminer.exe, cudaminer_start.bat, cudart64_55.dll & pthreadVC2.dll

Thanks

that sounds like the correct amount of files ya..
and here is the official page for cudaminer if you want to try and get it and look for help there too..
https://bitcointalk.org/index.php?topic=167229.0

is the proper nvidia drivers installed that support Cuda ?
you said you were trying a service service for this mining right ? sorry i forgot what you said before already on previous page

[DaveNYC1]

@ spoetnik -

After mining my brain for the past several hours, I finally got the cudaminer to work " (yay!!!) "

I'm assuming that the following confirms my suspicion?

[2014-02-12 01:02:16] GPU #0: GRID K520, 66953 khash/s
[2014-02-12 01:02:16] accepted: 16/16 (100.00%), 66953 khash/s (yay!!!)
[2014-02-12 01:02:22] GPU #0: GRID K520, 69221 khash/s
[2014-02-12 01:02:22] accepted: 17/17 (100.00%), 69221 khash/s (yay!!!)
[2014-02-12 01:02:31] GPU #0: GRID K520, 69023 khash/s
[2014-02-12 01:02:31] accepted: 18/18 (100.00%), 69023 khash/s (yay!!!)
[2014-02-12 01:02:46] GPU #0: GRID K520, 69326 khash/s
[2014-02-12 01:02:46] accepted: 19/19 (100.00%), 69326 khash/s (yay!!!)
[2014-02-12 01:02:48] GPU #0: GRID K520, 69007 khash/s
[2014-02-12 01:02:48] accepted: 20/20 (100.00%), 69007 khash/s (yay!!!)
[2014-02-12 01:03:05] GPU #0: GRID K520, 69267 khash/s
[2014-02-12 01:03:11] GPU #0: GRID K520, 69215 khash/s
[2014-02-12 01:03:11] GPU #0: GRID K520, 43801 khash/s
[2014-02-12 01:03:11] accepted: 21/21 (100.00%), 43801 khash/s (yay!!!)
[2014-02-12 01:03:11] accepted: 22/22 (100.00%), 43801 khash/s (yay!!!)
[2014-02-12 01:03:18] GPU #0: GRID K520, 69204 khash/s
[2014-02-12 01:03:18] accepted: 23/23 (100.00%), 69204 khash/s (yay!!!)
[2014-02-12 01:03:32] GPU #0: GRID K520, 69249 khash/s
[2014-02-12 01:03:32] accepted: 24/24 (100.00%), 69249 khash/s (yay!!!)
[2014-02-12 01:03:43] GPU #0: GRID K520, 69205 khash/s
[2014-02-12 01:03:52] GPU #0: GRID K520, 69182 khash/s
[2014-02-12 01:03:52] accepted: 25/25 (100.00%), 69182 khash/s (yay!!!)
[2014-02-12 01:03:53] GPU #0: GRID K520, 68495 khash/s
[2014-02-12 01:03:53] accepted: 26/26 (100.00%), 68495 khash/s (yay!!!)
[2014-02-12 01:03:54] GPU #0: GRID K520, 67758 khash/s
[2014-02-12 01:03:54] accepted: 27/27 (100.00%), 67758 khash/s (yay!!!)
[2014-02-12 01:03:54] GPU #0: GRID K520, 68495 khash/s
[2014-02-12 01:03:54] accepted: 28/28 (100.00%), 68495 khash/s (yay!!!)
[2014-02-12 01:04:02] GPU #0: GRID K520, 69135 khash/s
[2014-02-12 01:04:02] accepted: 29/29 (100.00%), 69135 khash/s (yay!!!)
[2014-02-12 01:04:15] GPU #0: GRID K520, 69225 khash/s
[2014-02-12 01:04:15] GPU #0: GRID K520, 65639 khash/s
[2014-02-12 01:04:15] accepted: 30/30 (100.00%), 65639 khash/s (yay!!!)
[2014-02-12 01:04:16] GPU #0: GRID K520, 68338 khash/s
[2014-02-12 01:04:16] accepted: 31/31 (100.00%), 68338 khash/s (yay!!!)
[2014-02-12 01:04:20] GPU #0: GRID K520, 68950 khash/s
[2014-02-12 01:04:20] accepted: 32/32 (100.00%), 68950 khash/s (yay!!!)
[2014-02-12 01:04:20] GPU #0: GRID K520, 61538 khash/s
[2014-02-12 01:04:20] accepted: 33/33 (100.00%), 61538 khash/s (yay!!!)
[2014-02-12 01:04:23] GPU #0: GRID K520, 69502 khash/s
[2014-02-12 01:04:23] accepted: 34/34 (100.00%), 69502 khash/s (yay!!!)
[2014-02-12 01:04:25] GPU #0: GRID K520, 68053 khash/s
[2014-02-12 01:04:25] accepted: 35/35 (100.00%), 68053 khash/s (yay!!!)
[2014-02-12 01:04:27] GPU #0: GRID K520, 68805 khash/s
[2014-02-12 01:04:27] accepted: 36/36 (100.00%), 68805 khash/s (yay!!!)
[2014-02-12 01:04:48] GPU #0: GRID K520, 69308 khash/s
[2014-02-12 01:05:24] GPU #0: GRID K520, 69314 khash/s
[2014-02-12 01:05:24] accepted: 37/37 (100.00%), 69314 khash/s (yay!!!)
[2014-02-12 01:14:56] Stratum detected new block
[2014-02-12 01:14:56] GPU #0: GRID K520, 1769 khash/s
[2014-02-12 01:14:57] GPU #0: GRID K520, 68956 khash/s
[2014-02-12 01:15:12] GPU #0: GRID K520, 69230 khash/s
[2014-02-12 01:15:12] accepted: 38/38 (100.00%), 69230 khash/s (yay!!!)

[1gh]

To speed up payment tx processing http://max.1gh.com  min immediate autopayment raised to 0.5 MAX

https://twitter.com/1ghcom/status/433570292602904577

 If your balance is less than 0.5 MAX, the payout will be executed within 24-72 hours (minimum 0.01 MAX).

[DaveNYC1]

1GH -

I am a member of your pool and I have a question about withdrawing funds.  When I was using a cpuminer, I was able to move out some of my mined work.  I've since switched to a cudaminer and can't see to do the same using the maxcoin-qt file I used before.  Can you point me in the right direction of how I may?  Thanks.