[ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★

[reorder]

.....

...or we could just download it gratis from http://cryptomining-blog.com/wp-content/files/cgminer-3-7-3-heavycoin-windows.zip instead...

Thank you!

But do see https://bitcointalk.org/index.php?topic=392322.msg5744577#msg5744577 post. And this applies not just to the version I linked to in my other post; I compiled from source myself and get the same dubious results.

Try intensity 3 or xintensity 102 to 105.

[GordonSSS]

.....

...or we could just download it gratis from http://cryptomining-blog.com/wp-content/files/cgminer-3-7-3-heavycoin-windows.zip instead...

Thank you!

But do see https://bitcointalk.org/index.php?topic=392322.msg5744577#msg5744577 post. And this applies not just to the version I linked to in my other post; I compiled from source myself and get the same dubious results.

Try intensity 3 or xintensity 102 to 105.

I'm using intensity 3 already. I'm happy enough to get 1.7Mh/s from my card, but that is not the issue. The problem is that the number of shares being found doesn't seem to correlate with the hash rate. On http://hvc.1gh.com, the total hash rate doesn't increase much when I add this GPU miner either, only by ~0.02MH/s.

[reorder]

.....

...or we could just download it gratis from http://cryptomining-blog.com/wp-content/files/cgminer-3-7-3-heavycoin-windows.zip instead...

Thank you!

But do see https://bitcointalk.org/index.php?topic=392322.msg5744577#msg5744577 post. And this applies not just to the version I linked to in my other post; I compiled from source myself and get the same dubious results.

Try intensity 3 or xintensity 102 to 105.

I'm using intensity 3 already. I'm happy enough to get 1.7Mh/s from my card, but that is not the issue. The problem is that the number of shares being found doesn't seem to correlate with the hash rate. On http://hvc.1gh.com, the total hash rate doesn't increase much when I add this GPU miner either, only by ~0.02MH/s.

Due to vardiff, you submit higher difficulty shares with faster miner, they are harder to find but cost more. For hashrate display, please mine for 15 minutes as displayed hashrate is averaged over this time.

[GordonSSS]

Due to vardiff, you submit higher difficulty shares with faster miner, they are harder to find but cost more. For hashrate display, please mine for 15 minutes as displayed hashrate is averaged over this time.

Been running it for a while now on a separate address, and it's settled in at only 0.04MH/s on http://hvc.1gh.com.

And my per-block share values are about 1/4 what I'm getting from 2 cpu-mining VMs with a hash rate of 0.16 MH/s.

This makes no sense 

[reorder]

Due to vardiff, you submit higher difficulty shares with faster miner, they are harder to find but cost more. For hashrate display, please mine for 15 minutes as displayed hashrate is averaged over this time.

Been running it for a while now on a separate address, and it's settled in at only 0.04MH/s on http://hvc.1gh.com.

And my per-block share values are about 1/4 what I'm getting from 2 cpu-mining VMs with a hash rate of 0.16 MH/s.

This makes no sense  

Please run it with debug and protocol enabled (-D -P) and PM me some of the output to investigate.

However, most probably it is non-GCN card (hashrate too low), the kernel is known to not work properly on these.

[GordonSSS]

Please run it with debug and protocol enabled (-D -P) and PM me some of the output to investigate.

However, most probably it is non-GCN card (hashrate too low), the kernel is known to not work properly on these.

It is a GCN card (Radeon 7850).

How can I redirect the output to a file? The usual '> myfile.txt' doesn't work.

[reorder]

Please run it with debug and protocol enabled (-D -P) and PM me some of the output to investigate.

However, most probably it is non-GCN card (hashrate too low), the kernel is known to not work properly on these.

It is a GCN card (Radeon 7850).

How can I redirect the output to a file? The usual '> myfile.txt' doesn't work.

2>myfile.txt should do the trick (it does in Linux fwiw)

[GordonSSS]

Please run it with debug and protocol enabled (-D -P) and PM me some of the output to investigate.

However, most probably it is non-GCN card (hashrate too low), the kernel is known to not work properly on these.

It is a GCN card (Radeon 7850).

How can I redirect the output to a file? The usual '> myfile.txt' doesn't work.

2>myfile.txt should do the trick (it does in Linux fwiw)

That worked - PM sent!

[rurki]

2 R9 270x and 2 R9 270 at intensity 6

http://s30.postimg.org/4rqr5egb5/New_Bitmap_Image.png

[reorder]

Please run it with debug and protocol enabled (-D -P) and PM me some of the output to investigate.

However, most probably it is non-GCN card (hashrate too low), the kernel is known to not work properly on these.

It is a GCN card (Radeon 7850).

How can I redirect the output to a file? The usual '> myfile.txt' doesn't work.

2>myfile.txt should do the trick (it does in Linux fwiw)

That worked - PM sent!

It appears that the kernel is filtering out too many shares for your hashrate (please note it is beta and WIP). Please edit the heavy140312.cl file changing RESULT_MASK on line 1603 to 0xF8000000U or even 0xF0000000U, remove .bin files and try running cgminer again.

[GordonSSS]

Please run it with debug and protocol enabled (-D -P) and PM me some of the output to investigate.

However, most probably it is non-GCN card (hashrate too low), the kernel is known to not work properly on these.

It is a GCN card (Radeon 7850).

How can I redirect the output to a file? The usual '> myfile.txt' doesn't work.

2>myfile.txt should do the trick (it does in Linux fwiw)

That worked - PM sent!

It appears that the kernel is filtering out too many shares for your hashrate (please note it is beta and WIP). Please edit the heavy140312.cl file changing RESULT_MASK on line 1603 to 0xF8000000U or even 0xF0000000U, remove .bin files and try running cgminer again.

That did the trick!

[jack80]

Dont work on my Nvidia 750ti im use this .bat , whats wrong ?

cgminer.exe -o stratum+tcp://hvcpool.1gh.com:5333 -u address wallet -p x



Help Please .

[reorder]

Dont work on my Nvidia 750ti im use this .bat , whats wrong ?

cgminer.exe -o stratum+tcp://hvcpool.1gh.com:5333 -u address wallet -p x



Help Please .

It is only for GCN cards on the moment.

[Speedie]

Working like a champ on HD 7950s, thank-you! Possible to have different workers on the same wallet address for vardiff purposes (e.g. wallet_address.1 wallet_address.2 etc) please, or do I have to generate a new wallet address for each rig? 10 rigs x 6 cards each = very high diff if they all mine to a single address.

[zelante]

whats wrong?

[reorder]

Working like a champ on HD 7950s, thank-you! Possible to have different workers on the same wallet address for vardiff purposes (e.g. wallet_address.1 wallet_address.2 etc) please, or do I have to generate a new wallet address for each rig? 10 rigs x 6 cards each = very high diff if they all mine to a single address.

It is not implemented yet, please use 2-3 different wallet addresses indeed. We have multiple backend servers each tracking vardiff independently, so vardiff multiplication effect will likely be dampened for you.

[reorder]

whats wrong?

Either you have not set the vote or you are using incorrect Heavycoin address.

[jack80]

Sure dont work on ATI 5xxx and 6xxx Anyone try ? .

[Wipeout2097]

Sure dont work on ATI 5xxx and 6xxx Anyone try ? .

I'm not sure *now*, but when I picked the source code yesterday, the binary I compiled misbehaved on a rig that had a 6950. I had to actually shutdown, remove the card and leave GCNs only.

[zelante]

whats wrong?

Either you have not set the vote or you are using incorrect Heavycoin address.

Can you show example parametrs for starting this cgminer?