[ANN] [SHA256]+[CPU] MediterraneanCoin (MED) - REUSE your ERUPTER!!

[fly757]

I would use mcproxy3 but cgminer doesn't recognize my bfl jally.  Any suggestions?

Use mcproxy3 with bfgminer

My Conf.:

Bfgminer:

"pools" : [
   {
      "url" : "http://localhost:8080",
      "user" : "USERNAME_POOL",
      "pass" : "PASS""
   }
]

mcproxy3 directly to getwork Pool:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s poolIP -p GETWORKPORT -l 8080 -m 4

mcproxy trought stratum-mining-proxy:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s 127.0.0.1 -p 3388 -l 8080 -m 4

stratum-mining-proxy conf:

 -q -o POOLADDRESS -p POOLPORT  -oh 127.0.0.1 -gp 3388 -sh 127.0.0.1 -sp 3377 -nm -rt

confused with the localhost
My desktop's local IP is:192.168.1.108,   and erupter blade's IP is :192.168.1.133:10000,,already set blade's configuration page as "Server URL:http://192.168.1.108:8333"

mcproxy trought stratum-mining-proxy:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s 127.0.0.1 -p 3388 -l 8080 -m 4

stratum-mining-proxy conf:

mining_proxy.exe -q -o ibipot.com -p 3333  -oh 127.0.0.1 -gp 3388 -sh 127.0.0.1 -sp 3377 -nm -rt


and the command for bfgminer is:

bfgminer -o http:\\localhost:8080 -u user -p password --http-port 8333 -Q 0


not sure about the red color part ,,as my configuration, what do I need to change ,especially for the IP address ,and port

[1714911035]

1714911035

[1714911035]

1714911035

[1714911035]

1714911035

[soulistyce]

want to buy 1400MED
my rate 1MED = 0.000025
total of 0.035btc

pm me if you interest on my rate

[oscarsum]

                                 
                                 
                                 

【WTB MED】, Please post offers, and reasons why you think its a fair offer

                                 
                                 
                                 

[poplolnman]

want to buy 1400MED
my rate 1MED = 0.000025
total of 0.035btc

pm me if you interest on my rate

your rates are way too low

[eestimees]

confused with the localhost
My desktop's local IP is:192.168.1.108,   and erupter blade's IP is :192.168.1.133:10000,,already set blade's configuration page as "Server URL:http://192.168.1.108:8333"

mcproxy trought stratum-mining-proxy:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s 127.0.0.1 -p 3388 -l 8080 -m 4

stratum-mining-proxy conf:

mining_proxy.exe -q -o ibipot.com -p 3333  -oh 127.0.0.1 -gp 3388 -sh 127.0.0.1 -sp 3377 -nm -rt


and the command for bfgminer is:

bfgminer -o http:\\localhost:8080 -u user -p password --http-port 8333 -Q 0


not sure about the red color part ,,as my configuration, what do I need to change ,especially for the IP address ,and port

have you tried only bfgminer (2nd gen), one guy in my pool is using 1 PC for 1 blade (for CPU to catch up) and he uses bfgminer with
"--http-port 1234" option and on blade config simpy points his blade to PC IP address and same port (1234).
he is one of top miners if I'm not mistaken.

EDIT: so in your case it is:
bfgminer --http-port 1234 -i ibipot.com:3333 -u user -p password
and on blade:
IP 192.168.1.108:1234
user and password also on blade setup to match the pool worker and pass

[soulistyce]

want to buy 1400MED
my rate 1MED = 0.000025
total of 0.035btc

pm me if you interest on my rate

your rates are way too low

if there isnt any exchange its better than nothing,
and its all i got

[brother59]

Why doesn't the faucet send the coins it says it is sending?

http://faucet.mediterraneancoin.org/

[urnotfish]

confused with the localhost
My desktop's local IP is:192.168.1.108,   and erupter blade's IP is :192.168.1.133:10000,,already set blade's configuration page as "Server URL:http://192.168.1.108:8333"

mcproxy trought stratum-mining-proxy:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s 127.0.0.1 -p 3388 -l 8080 -m 4

stratum-mining-proxy conf:

mining_proxy.exe -q -o ibipot.com -p 3333  -oh 127.0.0.1 -gp 3388 -sh 127.0.0.1 -sp 3377 -nm -rt


and the command for bfgminer is:

bfgminer -o http:\\localhost:8080 -u user -p password --http-port 8333 -Q 0


not sure about the red color part ,,as my configuration, what do I need to change ,especially for the IP address ,and port

have you tried only bfgminer (2nd gen), one guy in my pool is using 1 PC for 1 blade (for CPU to catch up) and he uses bfgminer with
"--http-port 1234" option and on blade config simpy points his blade to PC IP address and same port (1234).
he is one of top miners if I'm not mistaken.

EDIT: so in your case it is:
bfgminer --http-port 1234 -i ibipot.com:3333 -u user -p password
and on blade:
IP 192.168.1.108:1234
user and password also on blade setup to match the pool worker and pass

I only want to know what about this guy's hashrate with only one blade

[BChydro]

I believe MED will be hugely popular once the masses catch onto it, but I don't think MED is ready to go on a market just yet. I'd like to see the community grow first to avoid the chances of it becoming a pump n' dump coin.... Hell, I'll do my part. I will trade anyone a delivered pizza for MED. Preferably in Canada or the US. Any offers?

I may take you up on that

What time zone are you in? Lets make it happen, I'm west coast Canada

[fly757]

confused with the localhost
My desktop's local IP is:192.168.1.108,   and erupter blade's IP is :192.168.1.133:10000,,already set blade's configuration page as "Server URL:http://192.168.1.108:8333"

mcproxy trought stratum-mining-proxy:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s 127.0.0.1 -p 3388 -l 8080 -m 4

stratum-mining-proxy conf:

mining_proxy.exe -q -o ibipot.com -p 3333  -oh 127.0.0.1 -gp 3388 -sh 127.0.0.1 -sp 3377 -nm -rt


and the command for bfgminer is:

bfgminer -o http:\\localhost:8080 -u user -p password --http-port 8333 -Q 0


not sure about the red color part ,,as my configuration, what do I need to change ,especially for the IP address ,and port

have you tried only bfgminer (2nd gen), one guy in my pool is using 1 PC for 1 blade (for CPU to catch up) and he uses bfgminer with
"--http-port 1234" option and on blade config simpy points his blade to PC IP address and same port (1234).
he is one of top miners if I'm not mistaken.

EDIT: so in your case it is:
bfgminer --http-port 1234 -i ibipot.com:3333 -u user -p password
and on blade:
IP 192.168.1.108:1234
user and password also on blade setup to match the pool worker and pass

It does work ,but only get 2-3G hastrate with which supposed be 8G

I tried another way(Mcproxy3+mining_proxy+BFG1), I can get full speed ,and HW is low ,but accept is too low , the hastrate shows on the pool also very low

wondering which version of mcproxy are combined with BFG2?

hope DEV can improve the BFG2 performance later

[eestimees]

confused with the localhost
My desktop's local IP is:192.168.1.108,   and erupter blade's IP is :192.168.1.133:10000,,already set blade's configuration page as "Server URL:http://192.168.1.108:8333"

mcproxy trought stratum-mining-proxy:

"C:\Program Files\Java\jre7\bin\java" -jar mcproxy3.jar -s 127.0.0.1 -p 3388 -l 8080 -m 4

stratum-mining-proxy conf:

mining_proxy.exe -q -o ibipot.com -p 3333  -oh 127.0.0.1 -gp 3388 -sh 127.0.0.1 -sp 3377 -nm -rt


and the command for bfgminer is:

bfgminer -o http:\\localhost:8080 -u user -p password --http-port 8333 -Q 0


not sure about the red color part ,,as my configuration, what do I need to change ,especially for the IP address ,and port

have you tried only bfgminer (2nd gen), one guy in my pool is using 1 PC for 1 blade (for CPU to catch up) and he uses bfgminer with
"--http-port 1234" option and on blade config simpy points his blade to PC IP address and same port (1234).
he is one of top miners if I'm not mistaken.

EDIT: so in your case it is:
bfgminer --http-port 1234 -i ibipot.com:3333 -u user -p password
and on blade:
IP 192.168.1.108:1234
user and password also on blade setup to match the pool worker and pass

I only want to know what about this guy's hashrate with only one blade

at the moment, lowest blade hash is 9.1G and highest is 13.6G - looks normal to me.
blade -> 2nd gen bfgminer -> pool

[eestimees]

have you tried only bfgminer (2nd gen), one guy in my pool is using 1 PC for 1 blade (for CPU to catch up) and he uses bfgminer with
"--http-port 1234" option and on blade config simpy points his blade to PC IP address and same port (1234).
he is one of top miners if I'm not mistaken.

EDIT: so in your case it is:
bfgminer --http-port 1234 -i ibipot.com:3333 -u user -p password
and on blade:
IP 192.168.1.108:1234
user and password also on blade setup to match the pool worker and pass

It does work ,but only get 2-3G hastrate with which supposed be 8G

I tried another way(Mcproxy3+mining_proxy+BFG1), I can get full speed ,and HW is low ,but accept is too low , the hastrate shows on the pool also very low

wondering which version of mcproxy are combined with BFG2?

hope DEV can improve the BFG2 performance later

what CPU you have? I will ask config from that guy, how many PC's he has and what cpu and etc.

[namjar]

at 1st, thanks for cr1st0f to help us 

But this noon, our tech guy was exchanged the fee of our MPOS pool, the problem happened:

proportional_payout      ERROR       8.64 seconds    02/16 12:00:04    02/16 20:36:15    Cron disbaled due to errors

and wallet info shows:

Wallet Balance   2,969.51870362
Locked for users   4,137.28323244
Unconfirmed   630.06000000
Liquid Assets   -1,167.76452882

Workers can not see the new unconfirm MED....

What's wrong within it? 

[eestimees]

at 1st, thanks for cr1st0f to help us  

But this noon, our tech guy was exchanged the fee of our MPOS pool, the problem happened:

proportional_payout      ERROR       8.64 seconds    02/16 12:00:04    02/16 20:36:15    Cron disbaled due to errors

and wallet info shows:

Wallet Balance   2,969.51870362
Locked for users   4,137.28323244
Unconfirmed   630.06000000
Liquid Assets   -1,167.76452882

Workers can not see the new unconfirm MED....

What's wrong within it?  

check the cron logs and start ./run-crons.sh -f

I bet there is an error on blockupdate.txt logfile, as block founder is not known, because no info about finder is in database yet, rerunning the scripts will solve it. also you might want to modify accoring php cron file to make this error non fatal

[namjar]

at 1st, thanks for cr1st0f to help us  

But this noon, our tech guy was exchanged the fee of our MPOS pool, the problem happened:

proportional_payout      ERROR       8.64 seconds    02/16 12:00:04    02/16 20:36:15    Cron disbaled due to errors

and wallet info shows:

Wallet Balance   2,969.51870362
Locked for users   4,137.28323244
Unconfirmed   630.06000000
Liquid Assets   -1,167.76452882

Workers can not see the new unconfirm MED....

What's wrong within it?  

check the cron logs and start ./run-crons.sh -f

I bet there is an error on blockupdate.txt logfile, as block founder is not known, because no info about finder is in database yet, rerunning the scripts will solve it. also you might want to modify accoring php cron file to make this error non fatal

hi, eestimees,

Thanks for your help, and this problem has resolved.

Cheers! 

[halabibk]

Coins for sell each MED = 0.01 BTC.

[rmindel]

I just got a new AntMiner U1 today

I am very confused to how to use it...
I tried using the latest version of bfgminer , but it only get to 1GH,
So i read some people have been using the old bfgminer with proxy - but i can't figure out how to make that work with the pool...

Do i run both mcproxy and mining-proxy + old bfgminer?

Really confused ..

anyone..help?

I have 3 BEs, but they have good hash rates with the latest bfgminer

oh, and i tried using the modified cgminer, but it doesn't recognize my antminer (says there are no WinUsb drivers)

hmm...

[trinsic]

Yes run both.

mining-proxy: ./mining_proxy.py -o med.mine.nu -p 3333 -gp 8082 -sp 3334 -v

mcproxy: java -jar mcproxy3.jar -p 8082 -s localhost -a

Run BFGMiner and connect to localhost:8080 and then use your pool worker as login. Change med.mine.nu to your pool.

[rmindel]

Yes run both.

mining-proxy: ./mining_proxy.py -o med.mine.nu -p 3333 -gp 8082 -sp 3334 -v

mcproxy: java -jar mcproxy3.jar -p 8082 -s localhost -a

Run BFGMiner and connect to localhost:8080 and then use your pool worker as login. Change med.mine.nu to your pool.

thanks ,

i will try that

[rmindel]

Yes run both.

mining-proxy: ./mining_proxy.py -o med.mine.nu -p 3333 -gp 8082 -sp 3334 -v

mcproxy: java -jar mcproxy3.jar -p 8082 -s localhost -a

Run BFGMiner and connect to localhost:8080 and then use your pool worker as login. Change med.mine.nu to your pool.

thanks ,

i will try that

The bfgminer thinks the difficulty is () - and working on block "null", and every second shows Accepted 4/1, 8/1, ... etc
So my guess is something is wrong
I am using the mining_proxy.exe, not a .py