[ANN] LEASERIG.NET - rent&hire Quark hashing power!

[sikboy]

I got the proxy running fine on 1 rig, but want to add 2 others.

Do i use the same proxy id for all 3? as i assume that will be the only way to have all the mhash under 1 pc id.

I tried but I get connecting to leaserig.net, then connection to leaserig.net dropped!

 

You don't run multiple proxy instances with same ID (that will disconnect previous one as soon as new one is registered). You need to direct your mining rigs to use proxy instead - that will combine hashing power.

all good...thanx

[1715109307]

1715109307

[hrvatskafarma]

I have just moved my two rigs to proxy configuration and one thing is bothering me.
My rig stats graph is showing around 5-10% lower speeds than I see on my cgminer, my reject rate is not really high, so I dont know what could be the problem.

Pls help,

TY

[djeZo]

I have just moved my two rigs to proxy configuration and one thing is bothering me.
My rig stats graph is showing around 5-10% lower speeds than I see on my cgminer, my reject rate is not really high, so I dont know what could be the problem.

Pls help,

TY

Speed is measured out of shares - it is all about luck. I suggest you to use cgminer API speed readings.

[kenshirothefist]

Speed is measured out of shares - it is all about luck. I suggest you to use cgminer API speed readings.

djeZo, could you display separate graphs? One for hashpower (as it is already) + separate graph showing accepted/rejected/invalid shares?

[bitlynx]

DjeZo, did you change the speed calculation algorithms with LSR?  My Bob "rig cluster" is running about 6.5 MH/s combined, confirmed by adding the three speed values shown in the LSR status window, yet my history graph shows I jumped to 9.45 MH/s about five hours ago after a dip to zero for some reason.  That's cool and all, but unless I'm missing something big (like another rig I don't know about!) I don't think it's doing the math correctly.

[djeZo]

Speed is measured out of shares - it is all about luck. I suggest you to use cgminer API speed readings.

djeZo, could you display separate graphs? One for hashpower (as it is already) + separate graph showing accepted/rejected/invalid shares?

I don't want to do that - customers may judge rigs out of shares and we all know that share stats can greatly depend on how good pool is. Besides, share stats are reset the same moment you turn off cgminer or you turn off proxy, so there is not much point in doing this.

[djeZo]

DjeZo, did you change the speed calculation algorithms with LSR?  My Bob "rig cluster" is running about 6.5 MH/s combined, confirmed by adding the three speed values shown in the LSR status window, yet my history graph shows I jumped to 9.45 MH/s about five hours ago after a dip to zero for some reason.  That's cool and all, but unless I'm missing something big (like another rig I don't know about!) I don't think it's doing the math correctly.

Is there an actual point on graph at 9.45 or is just a curve being drawn so high?

[djeZo]

It is good to see that customers are finally starting to use orders 

[bitlynx]

[kenshirothefist]

I don't want to do that - customers may judge rigs out of shares and we all know that share stats can greatly depend on how good pool is

Exactly - this would be a good added value for customers - if accepted share percentage is low, they just might be mining at a bad pool and therefore they could switch to a better pool. And if customer is 100% sure that the pool is OK but there are still lots of rejects (for example > 10%) this would indicate a misconfigured/unhealthy rig. And yes, I agree that this information might bring some confusion ... it's all about weather to put providers or renters in a better position And of course you would display this info only for the current rent period and would only be visible to the provider and current renter.

Besides, share stats are reset the same moment you turn off cgminer or you turn off proxy, so there is not much point in doing this.

True. Maybe you could only display efficiency graph ... rejected divided by accepted in percentage - this would "survive" cgminer/proxy restart.

[djeZo]

Is one of your miners doing work on 2 pools at the same time? This could explain it...

Dedicated some more thoughts to it; check out your cgminer pools config and make sure none of your cgminers have 2 or more pools pointing to your proxy. To make everything working the best way, it is best to just have ONE pool pointed to (no backup pools on cgminer).

[hrvatskafarma]

Hi, After switching to leaserigProxy my stat are quite wierd

http://s29.postimg.org/89ga6kq3r/grapf.png


I read previous posts and I don't think that is my problem. Stats are wierd on my both rigs and for all previous costumers after switching to proxy.
By the way, cgminer is showing average 3.375 mhs for the same period displayed on graph.

[djeZo]

Enable cgminer API speed stat reading and you will have flat line again. Graph is jumpy because speed is calculated out of shares (so it is all about luck).

[bitlynx]

Must have been a temporary glitch because it went back to normal after that rental ended and the next began.  All miners only have one pool config which points at the proxy.

[bitlynx]

Enable cgminer API speed stat reading and you will have flat line again. Graph is jumpy because speed is calculated out of shares (so it is all about luck).

I know you already have it in the Advanced section, but you might want to highlight it in the LRP info section.  Also, I'd like the option to configure different API ports per connecting rig (I have two rigs at a remote location and only have one using LRP because I can't access API on both via a single IP and port.)

[khm]

Could you checkout last payment for my rig khmRig2. It was leased over 90min ago and transactionID is nowhere to be found on blockchain.
https://blockchain.info/tx/cf71d760d3a6514f87c77491b83067bf0989c8a782459ec2b7d129b24150156f

[Tigggger]

I'd echo the request to be able to pause rentals when the current one expires, I have some changes I'd like to make on one of my rigs but my current hirer keeps re-hiring before I get chance. I appreciate I could put a large price on it but am worried that he might not realise why I've done it and don't want to lose his custom in the future.

Quoting myself as I think I found an accidental fix

Simply remove all your renting plans, and it vanishes from the list (be sure to set the option to rehire to 0)

[djeZo]

Could you checkout last payment for my rig khmRig2. It was leased over 90min ago and transactionID is nowhere to be found on blockchain.
https://blockchain.info/tx/cf71d760d3a6514f87c77491b83067bf0989c8a782459ec2b7d129b24150156f

I think blockchain is stuck. Latest reported block there is more than 2 hours ago. I suggest you check your wallet. I see in LeaseRig wallet that transaction has been sent and was already confirmed 12 times.

[khm]

Could you checkout last payment for my rig khmRig2. It was leased over 90min ago and transactionID is nowhere to be found on blockchain.
https://blockchain.info/tx/cf71d760d3a6514f87c77491b83067bf0989c8a782459ec2b7d129b24150156f

I think blockchain is stuck. Latest reported block there is more than 2 hours ago. I suggest you check your wallet. I see in LeaseRig wallet that transaction has been sent and was already confirmed 12 times.

Yeap, it has arrived few minutes ago.

[copychicken]

I cant seem to make the python scrypt work.. i click on it and it just dissapears... i forgot to mention that i am a newbie...

I had problems with speed and disconnects with Leaserig proxy... and already lost 2 clients, i am trying to use the advanced method
with the python scrypt...but nothing.. i feel so stupid..