[ANN] [CHC] Chaincoin - Network Upgrade 16.3 - SegWit Activated

[silverfire]

Thanks for the advice.  Go ChainCoin
Trading volume looking really good, despite the rest of the market being a bloodbath!   Just shows that ChainCoin is only going upwards!   Get in quick people!

[btazi]

So... what's a masternode ? How do I create/join/make one ? 

[surgeo]

Greetings chainers! Is it possible to host multiple masternodes on the one VPS server? Individual servers gets expensive 

[rdivi]

Greetings chainers! Is it possible to host multiple masternodes on the one VPS server? Individual servers gets expensive 

Yes it is. Pop into the Slack for help with that.

[01Fedda]

Ok so let me teach you guys a lesson.  The reason why a lot of these coins don't make it pass a few dollars worth, is because of the coin supply.  When you have too many coins then you will have a lot of pumpers and dumpers. Also if you have a coin with a supply like 100,000,000,000; then you will need atleast a trillion dollar market to cover that, and that's way too much.  So one of the main reasons why I'm in chain coin is because of the low supply of coins.  And most importantly, we have a strong community of over 1,500 the last time I checked, and its long term.  So don't come here with your short term goals seriously.  We are setting records here.  I may not know a lot about the technical part of crypto, but i know how to trade and that's facts!.  There's a lot more i can say, but I've said too much already lol!

Cheers Chain-ers!  and don't forget our theme song which i personally picked myself lol! https://m.youtube.com/watch?v=zBn5aIfZElE   

[Neurolicious]

shut up!! 
THIS IS CHAINCOIN THEME!!
https://www.youtube.com/watch?v=mbAL8yZ4Ppk

[01Fedda]

shut up!! 
THIS IS CHAINCOIN THEME!!
https://www.youtube.com/watch?v=mbAL8yZ4Ppk

And who the hell are you lol?

[sotarules]

I just got two masternodes up and running.  I'm using Amazon AWS, Ubuntu 16.04.  One of my nodes is t2.micro and the other is t2.nano.  The t2.micro instance was up from yesterday and it has already generated 6 chaincoin.  The t2.nano instance has yet to generate any coins, but I got it working late last night.

I've been listening to HighOnCoins and that's how I found out about Chaincoin.  I love the idea of Pump-and-HODL instead of the standard Pump-and-Dump.  Masternode-coins make a lot of sense to me, and I'm committed to HODL essentially forever.  My initial stake is some cash peeled off from ETH, so I see it as an experiment worth trying.

As many Chaincoiners I'm kind of jealous of DASH, I think of all of the alter-coins, it seems really strong.  Ironically, I had a lot of DASH when it first started, but I sold it for BTC.

OH BTW for those using virtual machines with smaller memory (e.g., t2.nano only has 512MB of RAM), it is very important to create a swap file as specified in the Chaincoin masternode step-by-step instructions.  The MAKE process is pretty big, and without the swap file it was slowing to a crawl, even on the t2.micro instance with 1GB of RAM.  Once the swap file was defined, the build process worked smoothly.

[hashcube]

Hello all Chaincoin folks!  
I set up my first masternode today. For last 10 hours i had one payment of 2.0 CHC. Last 20 minutes were like Booom i got 2 payments one after one. Im happy about first rewards but i am little bit confused about it's timing. What is the average daily payment for one masternode and approx delay between icoming coins? I would launch few more if one isn't enough profitable.  

[dbh]

what should be in the config file for running a masternode on windows

[brakmic]

what should be in the config file for running a masternode on windows

Here you go: https://steemit.com/chaincoin/@jeffblogs/how-to-host-a-chaincoin-masternode-on-windows

[dbh]

great thanks

[brakmic]

great thanks

You're welcome.
And btw. read the comments below as well. There are some issues with Windows 10.

Have fun.

[betamovement]

Hi,
I set up for the first time masternode yesterday.
For the last 24 hours of running time (successfully started masternode) I received no payment.
What is wrong?
Any help appreciated.

[trustoll]

Legit is this chancoin

[Temporel]

both links for the GPU mining software are dead btw. And I cant find any good information on how to start mining chaincoins using GPUs.

Any reasons ??

TIA

[hashcube]

Hi,
I set up for the first time masternode yesterday.
For the last 24 hours of running time (successfully started masternode) I received no payment.
What is wrong?
Any help appreciated.

Check in the masternode log if there is any action for current time. Maybe it's stuck even tho was launched without errors.

[sotarules]

Hi,
I set up for the first time masternode yesterday.
For the last 24 hours of running time (successfully started masternode) I received no payment.
What is wrong?
Any help appreciated.

Couple of things.  First, I have two masternodes that I just got set up yesterday.  The first has generated three 2-coin transactions, and the second hasn't generated anything.

To check the status of your masternode, be sure to look at debug.log:

cat ~/.chaincoin/debug.log

or "follow" the log with this:

tail -F ~/.chaincoin/debug.log

You can see messages about whether your masternode is valid.  In my log, when my masternode made the transition from invalid to valid by getting 15 confirmations, the system logged this message:

2017-07-10 08:04:21 CActiveMasternode::ManageStatus() - Is capable master node!

Check to see if you can find this message in the log:

cat ~/.chaincoin/debug.log | grep "capable"

Also try this:

chaincoind masternode list | grep "<ipaddress>"

Where <ipaddress> is your masternode IP address.  You should see your node in the list with the word ENABLED after it.

BTW take this all with a grain of salt, I'm completely green.

[oldcoinguru]

So according to the block explorer http://104.238.153.140:3001/richlist 13.54% was sent to a burn address during the BARR nonsense.  I bet those people are regretting that decision now.

Anyway, 2029696.59569225 can be subtracted from the amount of coins listed on coinmarketcap.

Also
https://bitcointalk.org/index.php?topic=422149.msg14347106;topicseen#msg14347106

You can see that all the inputs are zero
http://104.238.153.140:3001/address/CGTta3M4t3yXu8uRgkKvaWd2d8DQvDPnpL

[betamovement]

Couple of things.  First, I have two masternodes that I just got set up yesterday.  The first has generated three 2-coin transactions, and the second hasn't generated anything.

To check the status of your masternode, be sure to look at debug.log:

cat ~/.chaincoin/debug.log

or "follow" the log with this:

tail -F ~/.chaincoin/debug.log

You can see messages about whether your masternode is valid.  In my log, when my masternode made the transition from invalid to valid by getting 15 confirmations, the system logged this message:

2017-07-10 08:04:21 CActiveMasternode::ManageStatus() - Is capable master node!

Check to see if you can find this message in the log:

cat ~/.chaincoin/debug.log | grep "capable"

Also try this:

chaincoind masternode list | grep "<ipaddress>"

Where <ipaddress> is your masternode IP address.  You should see your node in the list with the word ENABLED after it.

BTW take this all with a grain of salt, I'm completely green.

Thank you for the reply!
The masternode is set on windows, so now i have to find out the proper commands under win os.


About masternode list, I found this:
"10.0.1.9:11994" : "ENABLED",

WTH! it enabled the internal ip??!!

Here is the latest output from the debug console:

2017-07-09 18:14:26 CActiveMasternode::ManageStatus() - Checking inbound connection to '10.0.1.9:11994'
2017-07-09 18:14:26 CActiveMasternode::ManageStatus() - Is capable master node!
2017-07-09 18:14:26 connected to self at 10.0.1.9:60051, disconnecting
2017-07-09 18:14:26 CActiveMasternode::Register() - Adding to Masternode list service: 10.0.1.9:11994 - vin: CTxIn(COutPoint(f16cc4f8451f34e7e956802b7363a9a0ffcfd276921d0d20e1525a79bd83b51e, 0), scriptSig=)
2017-07-09 18:14:26 CActiveMasternode::Register() - RelayElectionEntry vin = CTxIn(COutPoint(f16cc4f8451f34e7e956802b7363a9a0ffcfd276921d0d20e1525a79bd83b51e, 0), scriptSig=)
2017-07-09 18:14:26 socket recv error An existing connection was forcibly closed by the remote host.  (10054)
2017-07-09 18:14:44 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.

------

CTxIn(COutPoint(f16cc4f8451f34e7e956802b7363a9a0ffcfd276921d0d20e1525a79bd83b51e, 0), scriptSig=)
2017-07-10 22:08:40 CheckBlock() : Using non-specific masternode payments 1172972
2017-07-10 22:08:40 CheckBlock() : Found payment(1|200000000) or payee(1|3QJmnh) nHeight 1172972.
2017-07-10 22:08:40   nActualTimespan = 390  before bounds
2017-07-10 22:08:40 GetNextWorkRequired RETARGET
2017-07-10 22:08:40 nTargetTimespan = 720    nActualTimespan = 712
2017-07-10 22:08:40 Before: 1c00936e  0000000000936e00000000000000000000000000000000000000000000000000
2017-07-10 22:08:40 After:  1c0091ca  000000000091caa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4fa4
2017-07-10 22:08:40 CheckBlock() : Using non-specific masternode payments 1172972
2017-07-10 22:08:40 CheckBlock() : Found payment(1|200000000) or payee(1|3QJmnh) nHeight 1172972.
2017-07-10 22:08:40 UpdateTip: new best=00000000003fa4e59807533f0cc26893d8b538e9ba34cf8d12f1dc45a18866e3  height=1172972  log2_work=53.510493  tx=1306209  date=2017-07-10 22:13:48 progress=1.000009
2017-07-10 22:08:40 ProcessBlock: ACCEPTED
2017-07-10 22:08:41 MasternodePOS::mnse - MasternodeB ranking is too low
2017-07-10 22:08:42 MasternodePOS::mnse - MasternodeB ranking is too low
2017-07-10 22:08:42 MasternodePOS::mnse - MasternodeB ranking is too low
2017-07-10 22:08:44 MasternodePOS::mnse - MasternodeB ranking is too low
2017-07-10 22:08:45 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.