BitCrack - A tool for brute-forcing private keys

[WanderingPhilospher]

Try that one

if not work try again with  click cuda_10.1.105_418.96_win10.exe  or cuda_10.1.243_win10_network.exe

I don't know my laptop not work with cuda 10.2

Did you change the vcxproj file to 10.2?  The default vcxproj has 10.1 props, if you do not change it to 10.2, you will get error (if trying to compile with 10.2)

[WanderingPhilospher]

obvious i click on release not debug let me roll back my driver and try again.. if i can't please share your compiled cubitcrack with me i am very exited to know this will work in 30 series or not..

Make sure the vcxproj file has 10.2 or you will get same error. You have to change the file to the props you are trying to compile with.

[Minase]

the question with debug or release was for _counselor not you zahid.
anyway here is the compiled version with random mode fixed: https://mega.nz/file/rlNSGbqD#D-6wJc1aiNS5Sb05ZAKV1FuGaks2slwR2CGIrUCnywo
as always, dont trust binaries.

[zahid888]

C:\Users\G:\cuBitCrack\cuBitCrack.exe --keyspace ae93ec9126000000:ffffffffffffffff 16jY7qLJnxb7CHZyqBP8qca9d51gAjyXQN
[2021-04-02.22:14:44] [Info] Compression: compressed
[2021-04-02.22:14:44] [Info] Starting at: 000000000000000000000000000000000000000000000000AE93EC9126000000
[2021-04-02.22:14:44] [Info] Ending at:   000000000000000000000000000000000000000000000000FFFFFFFFFFFFFFFF
[2021-04-02.22:14:44] [Info] Counting by: 0000000000000000000000000000000000000000000000000000000000000001
[2021-04-02.22:14:44] [Info] Initializing GeForce RTX 3060 Ti
[2021-04-02.22:14:50] [Info] Generating 39,845,888 starting points (1520.0MB)
[2021-04-02.22:14:54] [Info] 10.0%
[2021-04-02.22:14:54] [Info] 20.0%
[2021-04-02.22:14:55] [Info] 30.0%
[2021-04-02.22:14:55] [Info] 40.0%
[2021-04-02.22:14:55] [Info] 50.0%
[2021-04-02.22:14:55] [Info] 60.0%
[2021-04-02.22:14:56] [Info] 70.0%
[2021-04-02.22:14:56] [Info] 80.0%
[2021-04-02.22:14:56] [Info] 90.0%
[2021-04-02.22:14:56] [Info] 100.0%
[2021-04-02.22:14:56] [Info] Done
[2021-04-02.22:14:56] [Info] Error: misaligned address

ok finely this update is not for 30 series

[NotATether]

On V100 speed is drastically slower than normal:

Tesla V100-SXM2- 10809 / 16160MB | 1 target 224.55 MKey/s (6,422,528,000 total) [00:00:26]

Does anyone know the average speed for V100 on original Bitcrack?

[2021-04-02.22:14:56] [Info] Error: misaligned address

Is that on my build of BitCrack (I highly doubt it though; this error is strictly an optimization problem) or someone else's?

the question with debug or release was for _counselor not you zahid.
anyway here is the compiled version with random mode fixed: https://mega.nz/file/rlNSGbqD#D-6wJc1aiNS5Sb05ZAKV1FuGaks2slwR2CGIrUCnywo
as always, dont trust binaries.

Mind sharing with me the modified files through PM so I can commit the changes to my fork?

[zahid888]

On V100 speed is drastically slower than normal:

Tesla V100-SXM2- 10809 / 16160MB | 1 target 224.55 MKey/s (6,422,528,000 total) [00:00:26]

Does anyone know the average speed for V100 on original Bitcrack?

[2021-04-02.22:14:56] [Info] Error: misaligned address

Is that on my build of BitCrack (I highly doubt it though; this error is strictly an optimization problem) or someone else's?

the question with debug or release was for _counselor not you zahid.
anyway here is the compiled version with random mode fixed: https://mega.nz/file/rlNSGbqD#D-6wJc1aiNS5Sb05ZAKV1FuGaks2slwR2CGIrUCnywo
as always, dont trust binaries.

Mind sharing with me the modified files through PM so I can commit the changes to my fork?

the question with debug or release was for _counselor not you zahid.
anyway here is the compiled version with random mode fixed: https://mega.nz/file/rlNSGbqD#D-6wJc1aiNS5Sb05ZAKV1FuGaks2slwR2CGIrUCnywo
as always, dont trust binaries.

i download @Minase compiled version and he compiled yours

[Minase]

@NotATether, yes what i have uploaded it's your source code compiled with random mode fixed for cuda (made a PR right now)

//edit
i think we should mention the driver version also, right now i cant see it (im on remote) 

[_Counselor]

On V100 speed is drastically slower than normal:

Tesla V100-SXM2- 10809 / 16160MB | 1 target 224.55 MKey/s (6,422,528,000 total) [00:00:26]

Does anyone know the average speed for V100 on original Bitcrack?

Average speed with optimal grid settings is 1500 Mkey/s

Unfortunately at this moment all my 3090 is busy, I have to wait few days to check your version on RTX.

[zahid888]

Why this happens when i open sln file of @NotATether source


2 errors 1 warning

[Minase]

just right click on them and click load solution (or something like this)
// edit
i think we need a complete rewrite of bitcrack, i will try next week to see if i can succeed maybe it will work with newer graphic cards also. (first project in c++ and cuda) anyone who can code interested ?

[willi9974]

can anyone explain what the difference is between the various tools? please give me a few explanatory sentences so that you can understand it even if you are not so deep in it?

- BitCrack
- VanitySearch
- vanitygen
- vanitygen-plus


And what are these exact puzzle numbers?
what is it about puzzle?
https://privatekeys.pw/puzzles/bitcoin-puzzle-tx

[WanderingPhilospher]

just right click on them and click load solution (or something like this)
// edit
i think we need a complete rewrite of bitcrack, i will try next week to see if i can succeed maybe it will work with newer graphic cards also. (first project in c++ and cuda) anyone who can code interested ?

Programs exist for new cards.

Code:

GPU: GPU #1 GeForce RTX 3070 (46x128 cores) Grid(368x512)
1403.307 MK/s (GPU 1403.307 MK/s) (2^33.02) [00:00:06 Elapsed Time][0]
[i] Saving progress now... 10010000000000000000000000000053D30000000
1405.036 MK/s (GPU 1405.036 MK/s) (2^34.02) [00:00:12 Elapsed Time][0]

Just not 100% because you have to use string vs full address but at least you can use the newer cards. But a 3070 using a string gets 1400 +/- MKey/s

[Minase]

i know that programs exists for newer cards (what you are showing it's vanity search right?) quite interesting i get almost same speed on all RTX's 2060 as 3070. 1200-1300 compared to 1400 @ 3070
i have looked at jeanpaul source code and it's state of art nothing to say here, but vanitysearch uses a different concept than brute force and even if i introduced a keyspace to solve btc puzzle it will still not work as intended (i will need to modify a lot more there but maybe i will have a try). I dont want to reinvent the wheel

[WanderingPhilospher]

i know that programs exists for newer cards (what you are showing it's vanity search right?) quite interesting i get almost same speed on all RTX's 2060 as 3070. 1200-1300 compared to 1400 @ 3070
i have looked at jeanpaul source code and it's state of art nothing to say here, but vanitysearch uses a different concept than brute force and even if i introduced a keyspace to solve btc puzzle it will still not work as intended (i will need to modify a lot more there but maybe i will have a try). I dont want to reinvent the wheel

haha...no, this is not regular Vanity Search where the MKey/s you see when using regular Vanity Search is addresses, not keys.  When Vanity Search lands on a point, it looks/calculates 6 different addresses because of endo and symm. The 3070 on regular vanity gets over 2000 MKey/s

[fxsniper]

can anyone explain what the difference is between the various tools? please give me a few explanatory sentences so that you can understand it even if you are not so deep in it?

- BitCrack
- VanitySearch
- vanitygen
- vanitygen-plus


And what are these exact puzzle numbers?
what is it about puzzle?
https://privatekeys.pw/puzzles/bitcoin-puzzle-tx

puzzle is bitcoin address you need to crack bitcoin address by fine private key
if you got private key you can access to bitcoin and transfer bitcoin to you own as rewards

hint for puzzle is key range of bitcoin tell you know that bitcoin have private key on what range you can find it on range

puzzle 1 to 63 is solve already next will be puzzle 64 or any puzzle not yet solve

choose puzzle you want to solve and try to finish as you want
most select puzzle 64 for now because puzzle 64 is 64 bit is low range it is low bits to easy for crack if high range is very hard to crack it

this puzzle same in this forum
https://privatekeys.pw/puzzles/bitcoin-puzzle-tx
https://bitcointalk.org/index.php?topic=5218972.0
https://bitcointalk.org/index.php?topic=1306983.0

[pacnload]

puzzle is bitcoin address you need to crack bitcoin address by fine private key
if you got private key you can access to bitcoin and transfer bitcoin to you own as rewards

hint for puzzle is key range of bitcoin tell you know that bitcoin have private key on what range you can find it on range

puzzle 1 to 63 is solve already next will be puzzle 64 or any puzzle not yet solve

choose puzzle you want to solve and try to finish as you want
most select puzzle 64 for now because puzzle 64 is 64 bit is low range it is low bits to easy for crack if high range is very hard to crack it

this puzzle same in this forum
https://privatekeys.pw/puzzles/bitcoin-puzzle-tx
https://bitcointalk.org/index.php?topic=5218972.0
https://bitcointalk.org/index.php?topic=1306983.0

can someone explain how the puzzle works i mean how i must set the range?
for example:  15ANYzzCp5BFHcCnVFzXqyibpzgPLWaD8b
there is written: 295...296    800000000000000000000000...ffffffffffffffffffffffff

and the adresses is this from someone made the puzzle or from some unknow people?

[WanderingPhilospher]

puzzle is bitcoin address you need to crack bitcoin address by fine private key
if you got private key you can access to bitcoin and transfer bitcoin to you own as rewards

hint for puzzle is key range of bitcoin tell you know that bitcoin have private key on what range you can find it on range

puzzle 1 to 63 is solve already next will be puzzle 64 or any puzzle not yet solve

choose puzzle you want to solve and try to finish as you want
most select puzzle 64 for now because puzzle 64 is 64 bit is low range it is low bits to easy for crack if high range is very hard to crack it

this puzzle same in this forum
https://privatekeys.pw/puzzles/bitcoin-puzzle-tx
https://bitcointalk.org/index.php?topic=5218972.0
https://bitcointalk.org/index.php?topic=1306983.0

can someone explain how the puzzle works i mean how i must set the range?
for example:  15ANYzzCp5BFHcCnVFzXqyibpzgPLWaD8b
there is written: 295...296    800000000000000000000000...ffffffffffffffffffffffff

and the adresses is this from someone made the puzzle or from some unknow people?

yes, for 15ANY address, you have the correct 96 bit range. All addresses were funded by the creator of the challenge.

[NotATether]

Why this happens when i open sln file of @NotATether source

That's how it's always been with the .SLN files of Bitcrack, I guess if they are loaded when I merge them to git then they will be loaded by default, but I don't particularly recommend this because VS builds all the loaded projects together, so an error in one project will abort the entire build process.

[pacnload]

yes, for 15ANY address, you have the correct 96 bit range. All addresses were funded by the creator of the challenge.

and how can i set the range right? what means the 295?? must i write --keyspace 800000000000000000000000:ffffffffffffffffffffffff ? start with ..0000001 ?

[fxsniper]

yes, for 15ANY address, you have the correct 96 bit range. All addresses were funded by the creator of the challenge.

and how can i set the range right? what means the 295?? must i write --keyspace 800000000000000000000000:ffffffffffffffffffffffff ? start with ..0000001 ?

example you want to solve puzzle #96 addresss 15ANYzzCp5BFHcCnVFzXqyibpzgPLWaD8b 

puzzle #96 is high 2**96   (2 Exponent  96)  2^96 = 79228162514264337593543950336
this rank is number between  2^95 - 2^96 =  39614081257132168796771975168 - 79228162514264337593543950336

that mean key is 1 of  39614081257132168796771975168  number between  39614081257132168796771975168 to 79228162514264337593543950336

bitcrack using number in HEX
when you config use number in hex format not number decimal

convert number decimal to hex
https://www.rapidtables.com/convert/number/decimal-to-hex.html
39614081257132168796771975168 = 800000000000000000000000
79228162514264337593543950336-1 = FFFFFFFFFFFFFFFFFFFFFFFF

you need to start from 39614081257132168796771975168 = 800000000000000000000000
don't start from 000001