[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[Runnea]

I have some problem to the diff i think ?
I have 3 gridseed g-blade. and as you may know its too blades in them.
But 3 of the bldaes are running on a lower diff then the rest do?
using a raspberry pi.
and in putty its sad that i have like 17~ MH/S but on the web i only have like 14-14.5~ mh/S


i hope you understand my bad english

[1715280433]

1715280433

[1715280433]

1715280433

[1715280433]

1715280433

[1715280433]

1715280433

[1715280433]

1715280433

[iskandarX]

I have some problem to the diff i think ?
I have 3 gridseed g-blade. and as you may know its too blades in them.
But 3 of the bldaes are running on a lower diff then the rest do?
using a raspberry pi.
and in putty its sad that i have like 17~ MH/S but on the web i only have like 14-14.5~ mh/S


i hope you understand my bad english

I don't think so that raspberry pi might following so tight with auto switch mining pool, but the great usage on the static mining pool if you are only mining specific coin scrypt alo.

Since clevermining are rapidly switch the pool I think raspberry pi will not caught out like pc or laptop and the gridseed g-blade are the faster device put togather with mini size won't not show it true nature of works.

[MooseAgedon]

Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.

Batch File: ccminer.exe  -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x

CMD: Try 'ccminer --help' for more information.

Switch to cgminer 3.7.2 more stability for gpu mining, gridseed.

Thanks mate, just downloaded it. but i have a new issue. i ran this batch file: cgminer.exe -o stratum+tcp://ziftr.betarigs.com:3333 -u MitchAgedon.WorkerAgedon -p 1234

then the program runs and says there is an error, failed to init gpu.

it also says decrease tc or increase .

Change inside the bat file with this: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p x

This is the Batch file i am running now: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x -T

still not working. it returns with "invalid config option --kernel: cannot specify a kernel with scrypt."

I removed the Kernel line of code from the config whooch seems to have fixed that. but now when  run it returns "Error -61:clCreateBuffer <padbuffer8>, decrease tc or increase lg"
"Failed to init gpu thread 0, disabling device 0"

in then left it running and it is detecting blocks but said "requested work restart"

Try using this inside bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p d=512


"requested work restart" happen because of speed of your internet connection are slow or you are to far from the mining pool server. That is from what I reading on all over place.

I do hope if admin will able opening server in ASIA too because your miner from asia is quite increasing than europe.

i ran this in a batch file and its the same problem. cant initialize gpu.

i dont know if this will help but im running on a GeForce GT 740M gpu on my laptop.

and what does tc and lg mean.

Mining on a laptop CPU or GPU is not a very good idea.  You can damage the laptop with the excessive heat it will generate.

I guess i'll just quit then. Lots of trouble very little reward and possible damage to my computer. no t worth it for me.
thanks for all the help.

[iskandarX]

Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.

Batch File: ccminer.exe  -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x

CMD: Try 'ccminer --help' for more information.

Switch to cgminer 3.7.2 more stability for gpu mining, gridseed.

Thanks mate, just downloaded it. but i have a new issue. i ran this batch file: cgminer.exe -o stratum+tcp://ziftr.betarigs.com:3333 -u MitchAgedon.WorkerAgedon -p 1234

then the program runs and says there is an error, failed to init gpu.

it also says decrease tc or increase .

Change inside the bat file with this: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p x

This is the Batch file i am running now: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x -T

still not working. it returns with "invalid config option --kernel: cannot specify a kernel with scrypt."

I removed the Kernel line of code from the config whooch seems to have fixed that. but now when  run it returns "Error -61:clCreateBuffer <padbuffer8>, decrease tc or increase lg"
"Failed to init gpu thread 0, disabling device 0"

in then left it running and it is detecting blocks but said "requested work restart"

Try using this inside bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p d=512


"requested work restart" happen because of speed of your internet connection are slow or you are to far from the mining pool server. That is from what I reading on all over place.

I do hope if admin will able opening server in ASIA too because your miner from asia is quite increasing than europe.

i ran this in a batch file and its the same problem. cant initialize gpu.

i dont know if this will help but im running on a GeForce GT 740M gpu on my laptop.

and what does tc and lg mean.

Mining on a laptop CPU or GPU is not a very good idea.  You can damage the laptop with the excessive heat it will generate.

I guess i'll just quit then. Lots of trouble very little reward and possible damage to my computer. no t worth it for me.
thanks for all the help.

Here try take a look to this and consider to buy it for best mining : http://www.aliexpress.com/item/Gridseed-USB-5-2-6MH-S-Scrypt-miner-INCLUDE-POWER-SUPPLY-Litecoin-miner-better-than-antminer/32295417318.html

[Terk]

I have some problem to the diff i think ?
I have 3 gridseed g-blade. and as you may know its too blades in them.
But 3 of the bldaes are running on a lower diff then the rest do?
using a raspberry pi.
and in putty its sad that i have like 17~ MH/S but on the web i only have like 14-14.5~ mh/S


i hope you understand my bad english

Please check for wardware errors reported by your mining software. If you have anything above zero, then it's most likely causing the issue. Perhaps your gridseeds are overclocked and you get less hashrate (due to errors) than if you used lower voltage?

[Runnea]

I have some problem to the diff i think ?
I have 3 gridseed g-blade. and as you may know its too blades in them.
But 3 of the bldaes are running on a lower diff then the rest do?
using a raspberry pi.
and in putty its sad that i have like 17~ MH/S but on the web i only have like 14-14.5~ mh/S


i hope you understand my bad english

Please check for wardware errors reported by your mining software. If you have anything above zero, then it's most likely causing the issue. Perhaps your gridseeds are overclocked and you get less hashrate (due to errors) than if you used lower voltage?

I have had 18 Hardware error for the past 24 hours, is that alot?  and they are not overclocked or anything

[iskandarX]

Hello Terk requesting small earning for XXXX I stop mining on that address because I'm mining with other address, but please transfer the small reward for the confident to you pool reputation.  

[Terk]

Hello Terk requesting small earning for 1HqrKmGVM2KfjA6JWvEC1GJBXTrWcZttdt I stop mining on that address because I'm mining with other address, but please transfer the small reward for the confident to you pool reputation. 

Your balance is 0.00100648 BTC. Balances below 0.01 but above 0.001 BTC are paid weekly on weekends, so you should receive the payout on Sunday.

[iskandarX]

Hello Terk requesting small earning for 1HqrKmGVM2KfjA6JWvEC1GJBXTrWcZttdt I stop mining on that address because I'm mining with other address, but please transfer the small reward for the confident to you pool reputation. 

Your balance is 0.00100648 BTC. Balances below 0.01 but above 0.001 BTC are paid weekly on weekends, so you should receive the payout on Sunday.

It's fine, thanks alot, I want to use other wallet address for mining.

[kelsior]

Hey,


after now over 2 hours the page still doesn't find my "account". 1Kz7PPefDqp28wAm9SKGPrWZr3HcVsbPj5 this is my adress. Is it just simply not loading or does the server not recognize me?

[Stoneface]

I have some additional miners in US which are located and mining to the us-URL
with the same user: 1JnmoLccUYafL7o2wcpb8y6PoB7kDz2D7H

will both collected to the same userID?
because i have two graphs, one for EU one for US on my userscreen, but the overview dont show the correct collected MHs for both locations.

will they be payed together?

Thanks
Stonie

[BringTheRain]

Checking in on tonight's sweep, looks like there's a problem with a block of payments, transaction ID b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

https://blockchain.info/tx/b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200

Is this something new with BC.I ?

[artibg]

Checking in on tonight's sweep, looks like there's a problem with a block of payments, transaction ID b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

https://blockchain.info/tx/b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200

https://www.biteasy.com/blockchain/transactions/b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

[shamn85]

https://blockchain.info/tx/b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

I had the same problem too.

[shamn85]

https://blockchain.info/tx/b9426f3bac0b6179a87c24b17bf4446563eeb6e95d169a8bafcf6493b058d8f6

I had the same problem too.

whoops, i got the payment already. i heard there was a spam attack.

[Stoneface]

Hi,

I like to start also mining BTC direct.
does anyone knows a BTC- pool mybe like clevermining?

thanks for hints
Stonie

[shamn85]

Hi,

I like to start also mining BTC direct.
does anyone knows a BTC- pool mybe like clevermining?

thanks for hints
Stonie

try f2pool. I have some miner pointed at that pool a while back. check it out

[DarkMatters69]

*** SORRY FOR THE TROUBLE - TRANSACTION WENT THROUGH ***


Hi,

I've been using this mining pool for some time now, great payouts, the best around I find. I have received daily payouts without any problem until now. The last payment didn't go through. When I check the transaction ID (https://blockchain.info/tx/7299ef4987176e7bb0f794c78feb814146430f59a8def2749663097c93791b0d), I get the message "Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200". I don't see any link to contact support on the site itself so I thought I would inquire here if the balance will be returned to my account?

Thanks for any help.  

[iskandarX]

Hello Terk requesting small earning for xxxxxx I stop mining on that address because I'm mining with other address, but please transfer the small reward for the confident to you pool reputation.  

Your balance is 0.00100648 BTC. Balances below 0.01 but above 0.001 BTC are paid weekly on weekends, so you should receive the payout on Sunday.

Already receive the payment, thanks alot Terk.  

[Terk]

Hey,


after now over 2 hours the page still doesn't find my "account". 1Kz7PPefDqp28wAm9SKGPrWZr3HcVsbPj5 this is my adress. Is it just simply not loading or does the server not recognize me?

You were probably trying to mine SHA-256 algorithm with a bitcoin-compatible miner. You need to mine using scrypt algorithm with a litecoin-compatible miner.