[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[XliptTit]

should I be using submit no stale in my .bat file ?

you should be submiting stales, when the pool swiches coin and you submit a share from the prior coin(stale share) it will be counted and used.In normal pools(only 1 coin) stales share are from past block and are useless, as most of the stale shares are from past coins here they are usefull

[roy7]

Although please note if you ever mind on p2pool you must submit those stales, they could be valid blocks that pay everyone you're throwing away.

[lexusmike]

I've been mining with CM for over a week now at 9% invalid and all of a sudden my invalid share count is now at 60%?   are your server overloaded so you have alternative ports that we could connect too?

thanks
-Mike

[lexusmike]

Does anyone have a 7970 Bat file i can build off of. Im running GUIminer but i seem to be getting alot of invailds all of a sudden

thanks

[m4ttyd]

Using guiminer scrypt from the UK can't seem to log onto the pool

what's the host and user meant to be filled with?

password is nothing correct?

[utnorris]

Anyway we can get "Total Profits" to reflect payouts only since unexchanged and immature can vary due to fluctuations in coin prices?  By the way, liking this pool more than MC even though my rejects are a lot higher, but my payouts are higher so far, so it works out.

[jollyriffic]

231 accepted
134 stall/invalid

christ! at max on any other pool i'll get 4-9 stall/invalid within a 36hr span.

going back to switchercoin till you fix this.

[lobo_loco]

I've been getting copious "Rejected untracked stratum share from Pool 0" messages for the past couple of days, but in the last few hours that seems to have cleared up. Anybody else that was getting these messages see them disappear? I recognized that they didn't seem to be negatively affecting my stats, so I let it roll, but it's nice to have a "cleaner" output. I have a 7850 hashing at 370Kh/s and a 7870 hashing at 435Kh/s with a combined WU of 733/s. Reject rates at about 4.2%.

The Kalroth version of cgminer with it's xIntensity setting seems to be the golden ticket for me. I seem to get max hash for my cards with a slight underclock on GPU engine, mild undervolting, temps in the low 70s.

I'm really happy with this pool...great job, Terk!

[raphaelmax]

Help Needed guys.

I'm on Sgminer with 3 R9290's and i mostly see stratum from pool 0 .... and my rejects are 60% and up. I have another R9290X and it's worse.

Is it my settings or the pool has some issues??

Cheers

[Hotsauce]

Help Needed guys.

I'm on Sgminer with 3 R9290's and i mostly see stratum from pool 0 .... and my rejects are 60% and up. I have another R9290X and it's worse.

Is it my settings or the pool has some issues??

Cheers

What is your config? If you have an intensity of 20 try lowering it to 18 or even 13.

[pengoau]

Can you put an Asia (Singapore) server online? As at the moment for the past 48hrs my reject ratio is about 8% and I can't drop intensity as I have a 280x so intensity is fixed at 13.

For those that care my cgminer argument is:

--scrypt --thread-concurrency 8923 -g 2 -I 13 --gpu-fan 62 --temp-overheat 85 --temp-target 71 --lookup-gap 2 --expiry 1 --queue 0 --scan-time 1 --worksize 256 --gpu-powertune 20 --failover-only --temp-hysteresis 1

Hash Rate: 720 khsec
WU: 681 shares/min
Rejected: 8%
Stale: 0%

Any tips to bring down my reject rate would be great, but I think there is not much more I can do. As I'm in Australia and server is in the USA?

Testing:
--expiry 120 --queue 0 --scan-time 40

Hash Rate: 720
WU: 646
Rejected: 9.52
Stale: 0

After 45mins.

[trapstheclap]

I also started mining on this pool recently and I'm getting 14% rejects which is quite abnormal compared to my ~2% with other pools. A solution would be great.

[jollyriffic]

Help Needed guys.

I'm on Sgminer with 3 R9290's and i mostly see stratum from pool 0 .... and my rejects are 60% and up. I have another R9290X and it's worse.

Is it my settings or the pool has some issues??

Cheers

its just this pool.
using identical settings

switchercoin
604 accepts
4 stale/invalid

cleavermining
236 accepts
134 stale/invalid

[Hotsauce]

Hash Rate: 720 khsec
WU: 681 shares/min
Rejected: 8%
Stale: 0%

8% is about normal on this pool at the moment, go to your stats page and look at the 'Rejected Percentage' chart, in the last hour the pool has gone from 8%-14% and then back down, as long as you're under the pool rejected rate you're golden.

[Prima Primat]

Help Needed guys.

I'm on Sgminer with 3 R9290's and i mostly see stratum from pool 0 .... and my rejects are 60% and up. I have another R9290X and it's worse.

Is it my settings or the pool has some issues??

Cheers

its just this pool.
using identical settings

switchercoin
604 accepts
4 stale/invalid

cleavermining
236 accepts
134 stale/invalid

Read this post: https://bitcointalk.org/index.php?topic=448649.msg5063819#msg5063819

[sgsdebruijn]

Can you make de roll out of the EU more explicit, rejects are high out of the EU, good to see a amsterdam server (-;

Also my Work Utility (WU) decreases on this pool compared to Middlecoin, now tweaking de TC

[jollyriffic]

Help Needed guys.

I'm on Sgminer with 3 R9290's and i mostly see stratum from pool 0 .... and my rejects are 60% and up. I have another R9290X and it's worse.

Is it my settings or the pool has some issues??

Cheers

its just this pool.
using identical settings

switchercoin
604 accepts
4 stale/invalid

cleavermining
236 accepts
134 stale/invalid

Read this post: https://bitcointalk.org/index.php?topic=448649.msg5063819#msg5063819

i read that post as well as every faq they had on their site before trying to mine their pool.
my intensity is at 13. so while cleaver has a higher % than switcher, i can get more out of switcher profit simply due to having a higher hash (since i dont need to drop my intensity) and having far less invalids.. unless i'm missing something here.

[sgk]

i read that post as well as every faq they had on their site before trying to mine their pool.
my intensity is at 13. so while cleaver has a higher % than switcher, i can get more out of switcher profit simply due to having a higher hash (since i dont need to drop my intensity) and having far less invalids.. unless i'm missing something here.

They say their profitability-calculation and switching engine is better than others, so even with higher invalid shares you will be earning more profits than other switching pools. I haven't tried to compare myself to justify their claims though.

[coinspoolco]

Are you going to open at least one EU server please ? I am really look forward it.

[pindis]

Are you going to open at least one EU server please ? I am really look forward it.

Also waiting for this. us server gave me around 8 % rejects. waaaaay to much