[ANN] [MINT] Mintcoin (POS / 5%) [NO ICO] [Fair distro, community maintained]

[gmatty]

Nevermind fixed it. For those who might have a similar problem:

goto: help > Debug Window > Console : type repairwallet and hit return.
Then fully unlock wallet. You can relock the wallet if you like at this point.

[LEILO]

✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️✈️🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥🌙🌙🌙⚡️⚡️⚡️🌙🌙⚡️⚡️🌙⚡️⚡️⚡️⚡️⚡️🌙🌙🌙🌙🌙🌙🌙🌙🌙🌙🌜🌜🌜🌜🌜🌤⚡️⚡️⚡️⚡️⚡️🌙🌙🌙🌙🌙🌙         💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵

                                                     💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵

[Punqtured]

To all the new holders (obviously a lot lately) your coins start minting after 20 days in your wallet.

Don't start wallet sync from scratch: this coin is old and have a 30 second block cycle. Grab the snapshot and sync from there.

Remember to unlock your wallet to get minted coins.

And finally: welcome on board! ;-)

[cryptosnisgo]

Hi guys im new arround, can you please help me?

I downloaded the wallet and the snapshot...

Now i open the wallet and it dont sync and it also says 0 active conections to Mincoin network...and wallet offline....in the lower right corner.

What else should i do?

Tks in advance

[dplax00]

Hi guys im new arround, can you please help me?

I downloaded the wallet and the snapshot...

Now i open the wallet and it dont sync and it also says 0 active conections to Mincoin network...and wallet offline....in the lower right corner.

What else should i do?

Tks in advance

Having the Same Issue!
following

[cryptosnisgo]

Hi guys im new arround, can you please help me?

I downloaded the wallet and the snapshot...

Now i open the wallet and it dont sync and it also says 0 active conections to Mincoin network...and wallet offline....in the lower right corner.

What else should i do?

Tks in advance

Having the Same Issue!
following

Hope someone could help us

[funkwerk101]

Create a conf file in notepad with the below and add to mintcoin folder under appdata/roaming

addnode=144.76.64.123
addnode=81.95.191.233
addnode=211.28.143.54
addnode=89.71.42.172
addnode=79.124.7.72:12788
addnode=144.76.237.39:12788
addnode=82.211.60.130:12788
addnode=108.167.46.93:12788
addnode=158.69.27.82:12788
addnode=81.146.57.173:12788
addnode=184.7.192.21:12788
addnode=92.24.190.15:12788
addnode=72.226.24.176:12788
addnode=89.18.27.179:12788


The config file name is case sensitive. Use mintcoin.conf

Hope that helps

[cryptosnisgo]

Create a conf file in notepad with the below and add to mintcoin folder under appdata/roaming

addnode=144.76.64.123
addnode=81.95.191.233
addnode=211.28.143.54
addnode=89.71.42.172
addnode=79.124.7.72:12788
addnode=144.76.237.39:12788
addnode=82.211.60.130:12788
addnode=108.167.46.93:12788
addnode=158.69.27.82:12788
addnode=81.146.57.173:12788
addnode=184.7.192.21:12788
addnode=92.24.190.15:12788
addnode=72.226.24.176:12788
addnode=89.18.27.179:12788


The config file name is case sensitive. Use mintcoin.conf

Hope that helps

Tks mate!

[cryptosnisgo]

Create a conf file in notepad with the below and add to mintcoin folder under appdata/roaming

addnode=144.76.64.123
addnode=81.95.191.233
addnode=211.28.143.54
addnode=89.71.42.172
addnode=79.124.7.72:12788
addnode=144.76.237.39:12788
addnode=82.211.60.130:12788
addnode=108.167.46.93:12788
addnode=158.69.27.82:12788
addnode=81.146.57.173:12788
addnode=184.7.192.21:12788
addnode=92.24.190.15:12788
addnode=72.226.24.176:12788
addnode=89.18.27.179:12788


The config file name is case sensitive. Use mintcoin.conf

Hope that helps

Tks mate!

Still not working... ;(

[mchrist152]

Create a conf file in notepad with the below and add to mintcoin folder under appdata/roaming

addnode=144.76.64.123
addnode=81.95.191.233
addnode=211.28.143.54
addnode=89.71.42.172
addnode=79.124.7.72:12788
addnode=144.76.237.39:12788
addnode=82.211.60.130:12788
addnode=108.167.46.93:12788
addnode=158.69.27.82:12788
addnode=81.146.57.173:12788
addnode=184.7.192.21:12788
addnode=92.24.190.15:12788
addnode=72.226.24.176:12788
addnode=89.18.27.179:12788


The config file name is case sensitive. Use mintcoin.conf

Hope that helps

Tks mate!

Still not working... ;(

I used to run mintcoin, but even when it is running it takes a lot of resources and is hard to upgrade. I had to download the entire block chain on several occasions to get it back up and working. The best suggestion I can give you is to run blackcoin instead. It's light on resources and runs like a charm. I've been very happy with it. It is a POS coin just like Mintcoin and created around the same time. Mintcoin has a better name and marketing but Blackcoin does a much better job of delivering on the POS promise. That's been my experience anyway.

[funkwerk101]

Create a conf file in notepad with the below and add to mintcoin folder under appdata/roaming

addnode=144.76.64.123
addnode=81.95.191.233
addnode=211.28.143.54
addnode=89.71.42.172
addnode=79.124.7.72:12788
addnode=144.76.237.39:12788
addnode=82.211.60.130:12788
addnode=108.167.46.93:12788
addnode=158.69.27.82:12788
addnode=81.146.57.173:12788
addnode=184.7.192.21:12788
addnode=92.24.190.15:12788
addnode=72.226.24.176:12788
addnode=89.18.27.179:12788


The config file name is case sensitive. Use mintcoin.conf

Hope that helps

Tks mate!

Still not working... ;(

Just pulled out my conf file. Here is the complete list - 12 connections and running fine. Try adding all of these.
Its is a large chain so will take a while if your going from scratch. i would recommend the bootstrap.

listen=1
addnode=81.17.16.228
addnode=184.154.4.43
addnode=64.58.130.180
addnode=193.242.159.253
addnode=79.17.72.110
addnode=174.139.194.205
addnode=24.57.75.67
addnode=24.86.14.251
addnode=93.152.184.244
addnode=70.180.167.36
addnode=61.182.139.73
addnode=59.40.165.21
addnode=58.254.168.36
addnode=101.226.247.43
addnode=71.72.180.213
addnode=118.208.208.86
addnode=94.123.203.117
addnode=71.56.243.136
addnode=203.208.83.100
addnode=116.23.14.113
addnode=101.224.84.242
addnode=210.49.207.71
addnode=124.169.110.219
addnode=46.208.243.18
addnode=89.173.16.49
addnode=93.91.51.111
addnode=92.108.233.53
addnode=120.144.132.169
addnode=90.148.79.252
addnode=113.167.83.32
addnode=178.217.59.2
addnode=67.191.52.11
addnode=220.168.105.18
addnode=67.191.189.132
addnode=67.180.104.110
addnode=99.250.206.168
addnode=98.255.23.128
addnode=112.66.78.2
addnode=68.146.84.237
addnode=83.53.153.73
addnode=182.239.144.188
addnode=72.191.117.227
addnode=114.141.14.14
addnode=94.254.37.103
addnode=86.125.214.133
addnode=9.207.10.24
addnode=66.18.67.23
addnode=46.4.95.176
addnode=107.170.22.138
addnode=180.141.137.44
addnode=212.247.109.253
addnode=111.126.201.199
addnode=115.28.162.160
addnode=183.100.94.203
addnode=79.111.216.239
addnode=122.178.204.154
addnode=31.7.27.94
addnode=78.30.234.229
addnode=193.77.151.95
addnode=62.194.23.49
addnode=88.213.221.126
addnode=37.59.14.189
addnode=199.200.120.163
addnode=162.243.35.172
addnode=107.170.26.155
addnode=162.243.222.26

Hope that works, its great to see life back in the mint   

[jtmillican]

Anyone know why Cryptopia has 0 connections to the MintCoin network?

[Altcner]

I am really big fan of mint coin. Was one the first coin that I invested back in 2014 in and still believe in it. I still didn’t sell the coins that I owned back then. Why are we not doing anything to support or fix the coin problems if there are any? If the developer need support we can raise a donation fund and fix the problems. I can’t see it dying

[shixd8899]

The mint (MINT) is a green, green, innovative, safe and energy-efficient PoW/PoS coin. I like this very much, saving a lot of energy in digital money than other coins.

[romeshomey]

I'm unable to get the 2.0.2 wallet to run in windows 10 64bit environment.

It just hangs in an unresponsive window.

I am however able to get previous version to open and run.  Am at a loss as to whats causing the 2.0.2 version to hang unresponsive.  

I've tried removing everything in the data directory except for just the wallet.dat and same result.

Correction, 2.0.1 hangs the same as 2.0.2.

Latest version I a have an am able to open is v1.17

[romeshomey]

Hmm, actually this seems isolated to that one system.  I installed 2.0.2 on another windows 10 machine and it opened just fine. 

I'll have to figure out whats preventing it from opening on the other system. 

[romeshomey]

Fixed.

For some reason Mintcoin was showing up 4x in my firewall permissions.  Removed them all, started wallet again.  Wallet opened.

Bizarro lol..

[romeshomey]

Nope, still not fixed.  Even though the wallet actually opened, it wasn't downloading any data and went into an unresponsive status again.  Closed wallet, deleted directory files, opened wallet, hangs at blank white window again.

Bah... 

[romeshomey]

Now its fixed.  Not sure what happened there but I had initially used the installer to install v2.0.2.

I removed Mintcoin in add/remove programs, restarted system.  Used the .zip download instead and now wallet opens fine, runs, and is downloading blocks.

[romeshomey]

Is anyone able to withdraw from Cryptopia?  I keep getting an 'invalid MINT address' when attempting to withdraw.