Can anyone tell me how to mine LTC only with the supplied controller from zoomhash? The other guide is for lightning asic software setup
If it's the Gridseed miner and has the markings, it should be closely the same.
Plug the power into the miners. Plug the miners into the USB HUB. Plug the HUB into the Controller. Plug the controller into your network.
Power on the Miners. Power up the USB HUB. Power up the Controller. Wait a few seconds and the controller will have an IP address.
Log into the controller with a web browser using the IP of the controller (example: 192.168.2.5) Your network will be different.
The controller should be in English and Mandarin (Chinese language) and the main page will refresh every 10 seconds (you can see by the timer).
In the upper right corner of the page is the SETTINGS option. That is where you add the settings for the miners in SHA256 (BTC) and Scrypt (LTC).
I would assume you can just leave the BTC lines blank (empty) and the controller should bypass the SHA256 hashing. You can tell if it does by the power usage and the amount of heat the units generate.