miniZ (OP)
|
|
April 20, 2019, 11:51:32 PM |
|
not really dropped. infact i had to increase powerlimit as it became unstable, here are my OC settings log info : [ 0d 1h50m26s] 449(447.4)Sol/s 857(853.3)W 0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.3(67.7)Sol/s 135(134.4)W clk=1430MHz mclk=4957MHz Sol/W=0.50 1>GTX 1080 Ti ` 100% [47°C/50%] 33.81 I/s 68.0(67.3)Sol/s 124(122.9)W clk=1341MHz mclk=4957MHz Sol/W=0.55 2>GTX 1080 Ti ` 100% [47°C/50%] 39.62 I/s 79.1(79.1)Sol/s 151(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53 3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.9(76.9)Sol/s 147(148.2)W clk=1620MHz mclk=4957MHz Sol/W=0.52 4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.3(78.9)Sol/s 150(149.3)W clk=1683MHz mclk=4957MHz Sol/W=0.53 5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.3(77.5)Sol/s 149(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52 [ 0d 1h50m36s] 448(447.4)Sol/s 860(853.4)W 0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.1(67.7)Sol/s 136(134.4)W clk=1379MHz mclk=4957MHz Sol/W=0.50 1>GTX 1080 Ti ` 100% [48°C/50%] 33.82 I/s 67.9(67.3)Sol/s 124(122.9)W clk=1354MHz mclk=4957MHz Sol/W=0.55 2>GTX 1080 Ti ` 100% [47°C/50%] 39.63 I/s 79.6(79.1)Sol/s 150(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53 3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.8(76.9)Sol/s 150(148.3)W clk=1645MHz mclk=4957MHz Sol/W=0.52 4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.1(78.9)Sol/s 150(149.3)W clk=1657MHz mclk=4957MHz Sol/W=0.53 5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.5(77.6)Sol/s 150(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52 Hi AZaman, we are sorry, but maybe we did not understand exactly what you consider to be the problem. With --oc1 we expect that the cards with less power would benefit more. Did you try running miniZ without --oc1? What was the difference? Could you paste here right the beginning of the log? (Right after "******** miniZ v1.2m ********") Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
|
|
|
|
If you see garbage posts (off-topic, trolling, spam, no point, etc.), use the "report to moderator" links. All reports are investigated, though you will rarely be contacted about your reports.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
AZaman
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 21, 2019, 09:24:51 AM |
|
not really dropped. infact i had to increase powerlimit as it became unstable, https://ibb.co/LZ9RwY3here are my OC settings https://ibb.co/4NMqHk3Hi AZaman, we are sorry, but maybe we did not understand exactly what you consider to be the problem. With --oc1 we expect that the cards with less power would benefit more. Did you try running miniZ without --oc1? What was the difference? Could you paste here right the beginning of the log? (Right after "******** miniZ v1.2m ********") Cheers here is the beginning of the log: miniZ https://miniz.ch/hiveos/miniZ-1.2m.tar.gzAlready installed --telemetry :20000 --gpu-line --url=abcd1.xxx@stratum.zel.cash:2001 --oc1 ************ miniZ v1.2m ************ Number of CUDA devices found: 6 miniZ,144,5[7]: Selecting GPU#3 GeForce GTX 1080 Ti miniZ,144,5[7]: Selecting GPU#0 GeForce GTX 1080 Ti miniZ,144,5[7]: Selecting GPU#2 GeForce GTX 1080 Ti miniZ,144,5[7]: Selecting GPU#1 GeForce GTX 1080 Ti miniZ,144,5[7]: Selecting GPU#5 GeForce GTX 1080 Ti miniZ,144,5[7]: Selecting GPU#4 GeForce GTX 1080 Ti Algo: EQ[144,5] Pool#0: user[abcd1.xxxx] server[stratum.zel.cash] port[2001] ssl[no] pers[ZelProof] Telemetry: [http://localhost:20000] Temp. limit: [90∞C] let me try without --oc1 for a few hours.
|
|
|
|
Skarner21
|
|
April 21, 2019, 05:32:26 PM |
|
@azaman are you using Linux OS? it seems that the --oc1 works to me fine the --oc2 reduce my power consumption and there's a little reduce in hashrate compared on using --oc1.
I'm using windows 10 with 4.19.17 driver installed.
Have you tried down grading or upgrading your driver latest or below version?
|
Make crypto as your bank.
|
|
|
AZaman
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 21, 2019, 09:29:54 PM |
|
@azaman are you using Linux OS? it seems that the --oc1 works to me fine the --oc2 reduce my power consumption and there's a little reduce in hashrate compared on using --oc1.
I'm using windows 10 with 4.19.17 driver installed.
Have you tried down grading or upgrading your driver latest or below version?
Hi, yes im using linux - Im using Hiveos. driver is 418.43 oc1 is supposed to be more efficient. oc2 is maximum performance. (great if electricity is cheap)
|
|
|
|
miniZ (OP)
|
|
April 26, 2019, 12:47:49 AM |
|
Hi everyone thank you all for your feedback and support. There is a new miniZ miner version v1.3n! * Support for Equihash 150,5 (BEAM). * Configuration file support. * Console output on telemetry. * ... Equihash 150,5: * GTX 1050 Ti 4GB ~7-8 Sol/s * GTX 1060 3GB ~13-15 Sol/s * GTX 1070 Ti 8GB ~27-30 Sol/s * GTX 1080 8GB ~28-29 Sol/s * GTX 1080 Ti 11GB ~38-41 Sol/s * RTX 2070 8GB ~31-35 Sol/s * RTX 2080 Ti 11GB ~58-64 Sol/s For more information check the first page https://bitcointalk.org/index.php?topic=4767892.msg43058434#msg43058434Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best. Hive OS supportFor more information, download, and support check the website: https://miniz.ch/FAQ and UsageDownload miniZ miner here: https://miniz.ch/download/Follow us TwitterHappy mining!
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
joseph32
Member
Offline
Activity: 413
Merit: 21
|
|
April 26, 2019, 03:49:13 AM |
|
Is Nicehash supported with 150.5? And if yes, how? It just shows the first few lines and then nothing happens anymore.
|
|
|
|
miniZ (OP)
|
|
April 26, 2019, 03:58:24 AM |
|
Hi joseph32, nicehash should work just fine. If you are mining to a ssl port do not forget to specify the ssl:// prefix. Check our web page https://miniz.ch/faq/ for a few examples. If you don't manage to make it work, you could post here your command line and we try to help further. Cheers, miniZ
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
joseph32
Member
Offline
Activity: 413
Merit: 21
|
|
April 26, 2019, 05:37:23 AM |
|
Ha, found the error. I tried it with 150.5, not 150,5 Thx for the help!
|
|
|
|
sharmanov
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 26, 2019, 01:13:48 PM |
|
Would you ever consider support for AMD Vega/Vega20 cards 🙏 .... this is by far the KING of all Equihash NVIDIA miners, any plans to also be the king of AMD side?
|
|
|
|
ltxminer
Newbie
Offline
Activity: 14
Merit: 0
|
|
April 26, 2019, 01:17:34 PM |
|
Did you test 150,5 with 1060 3GB on windows? I cannot get it to run. Four 1060 3GB cards, 32GB pagefile something "mem alloc 1040Mb error" Hi everyone thank you all for your feedback and support. There is a new miniZ miner version v1.3n! * Support for Equihash 150,5 (BEAM). * Configuration file support. * Console output on telemetry. * ... Equihash 150,5: * GTX 1050 Ti 4GB ~7-8 Sol/s * GTX 1060 3GB ~13-15 Sol/s * GTX 1070 Ti 8GB ~27-30 Sol/s * GTX 1080 8GB ~28-29 Sol/s * GTX 1080 Ti 11GB ~38-41 Sol/s * RTX 2070 8GB ~31-35 Sol/s * RTX 2080 Ti 11GB ~58-64 Sol/s For more information check the first page https://bitcointalk.org/index.php?topic=4767892.msg43058434#msg43058434Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best. Hive OS supportFor more information, download, and support check the website: https://miniz.ch/FAQ and UsageDownload miniZ miner here: https://miniz.ch/download/Follow us TwitterHappy mining!
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
|
April 26, 2019, 01:22:42 PM |
|
Hi joseph32, nicehash should work just fine. If you are mining to a ssl port do not forget to specify the ssl:// prefix. Check our web page https://miniz.ch/faq/ for a few examples. If you don't manage to make it work, you could post here your command line and we try to help further. Cheers, miniZ Nice docs too ... Testing this weekend. #crysx
|
|
|
|
miniZ (OP)
|
|
April 26, 2019, 02:20:06 PM |
|
Would you ever consider support for AMD Vega/Vega20 cards 🙏 .... this is by far the KING of all Equihash NVIDIA miners, any plans to also be the king of AMD side?
Hi sharmanov, Thank you for your encouragement. At the moment we are not considering to add support for AMD. We suggest that you user another miner like lol miner that has a good AMD support. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
April 26, 2019, 02:23:29 PM |
|
Did you test 150,5 with 1060 3GB on windows?
I cannot get it to run.
Four 1060 3GB cards, 32GB pagefile
something "mem alloc 1040Mb error"
Hi ltxminer, 3GB is very tight for 150,5 algo. Windows 10 makes ~20% of your gpu memory unavailable so it would not fit. It should work fine in Linux or Windows 7. Could you post here the output of ./miniZ -ci ? Thanks. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
clousian
Newbie
Offline
Activity: 33
Merit: 0
|
|
April 26, 2019, 02:38:46 PM |
|
Sorry if this has been asked before, when is a win10 AMD friendly version been released?
|
|
|
|
crairezx20
Legendary
Offline
Activity: 1638
Merit: 1046
|
|
April 26, 2019, 02:48:42 PM |
|
is it normal that your miner temp goes down while mining with this miner? I noticed the difference of this mining software from other mining software it keeps my rigs cooler is it normal? Before my GTX 1080ti reach 65c but right now the temp is playing around 55c?
or maybe there's wrong about my rig that is why it detects low temps in all of my cards?
|
|
|
|
miniZ (OP)
|
|
April 26, 2019, 03:09:46 PM |
|
Sorry if this has been asked before, when is a win10 AMD friendly version been released?
Hi clousian, At the moment we are not considering to add support for AMD. We suggest that you user another miner like lol miner that has a good AMD support. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
April 26, 2019, 03:12:24 PM |
|
is it normal that your miner temp goes down while mining with this miner? I noticed the difference of this mining software from other mining software it keeps my rigs cooler is it normal? Before my GTX 1080ti reach 65c but right now the temp is playing around 55c?
or maybe there's wrong about my rig that is why it detects low temps in all of my cards?
Hi crairezx20, The difference looks a bit too big to be normal. Could you post here the log ? Also, can you let us know which miniZ version are you using? Is it Cuda 8 or Cuda 10? Which pool are you using? Thanks. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
ltxminer
Newbie
Offline
Activity: 14
Merit: 0
|
|
April 26, 2019, 03:14:50 PM |
|
Did you test 150,5 with 1060 3GB on windows?
I cannot get it to run.
Four 1060 3GB cards, 32GB pagefile
something "mem alloc 1040Mb error"
Hi ltxminer, 3GB is very tight for 150,5 algo. Windows 10 makes ~20% of your gpu memory unavailable so it would not fit. It should work fine in Linux or Windows 7. Could you post here the output of ./miniZ -ci ? Thanks. Cheers I am using windows 7, on idle my cards are using 3Mb according to GPU-Z, basically nothing. That means with the full 3Gb available for the miner Still "mem alloc error 1040Mb"
|
|
|
|
miniZ (OP)
|
|
April 26, 2019, 03:37:09 PM |
|
Did you test 150,5 with 1060 3GB on windows?
I cannot get it to run.
Four 1060 3GB cards, 32GB pagefile
something "mem alloc 1040Mb error"
Hi ltxminer, 3GB is very tight for 150,5 algo. Windows 10 makes ~20% of your gpu memory unavailable so it would not fit. It should work fine in Linux or Windows 7. Could you post here the output of ./miniZ -ci ? Thanks. Cheers I am using windows 7, on idle my cards are using 3Mb according to GPU-Z, basically nothing. That means with the full 3Gb available for the miner Still "mem alloc error 1040Mb" Hi ltxminer, try using --mode=3, it may help but it might become a bit slower. Could you post here the output of running miniZ.exe -ci? Thanks. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
cervajz
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 26, 2019, 03:45:57 PM |
|
Hi, great Beam hashrate, but I have lot of rejects (20-30%) on nicehash on poolside.
Gminer, and Bimer are slower, but without rejects
|
|
|
|
|