Execoin: | First Open-Source Stealth Wallet Released! | Fast | ASIC-proof

[execoin]

Part of the network is on wrong fork. Please move your hashrate out of multipools.
Please check http://explorer.execoin.net for current block.
http://pool.execoin.net  is on correct fork too.

If your wallet stuck (or shows last block different from the block explorer), please resync by closing wallet, removing everything except wallet.dat in your profile folder and re-opening wallet.

DNS node seeders are on correct fork (you may get a list of nodes by running 'nslookup dnsseed.execoin.net' from your command prompt).

Here is a list of correct nodes just in case:
addnode=95.85.26.197
addnode=107.170.240.30
addnode=162.243.136.142
addnode=128.199.233.179
addnode=198.211.100.64
addnode=192.241.152.198
addnode=107.170.79.10
addnode=37.139.3.206
addnode=188.226.169.188
addnode=107.170.227.175
addnode=128.199.221.109
addnode=107.170.227.176
addnode=188.226.169.189
addnode=192.241.128.215
addnode=107.170.79.12
addnode=107.170.12.174
addnode=188.226.130.205

[1715053418]

1715053418

[1715053418]

1715053418

[1715053418]

1715053418

[CryptoLTD]

Ok, cool..the exchanges are probabaly scratching their heads @ the moment. I know cryptsy's withdraws & deposits are not working for exe @ moment, unsure about poloniex's .

[execoin]

Please let multipool.us know that they are on the wrong fork.

[CryptoLTD]

I send them email, I dont use them, but found admin email for multipool

[CryptoLTD]

You are going to have to contact the exchanges yourself, as they will only take info from the developer in regards to the proper chain.

[shango]

i am mining nicely on pool.execoin.net - no problems and no interruptions there!

[execoin]

I send them email, I dont use them, but found admin email for multipool

Thank you, they resynced.

Part of the network was on wrong fork.
Now everything is fixed. Please check http://explorer.execoin.net for current block.
http://pool.execoin.net is on correct fork too.

If your wallet stuck (or shows last block different from the block explorer), please resync by closing wallet, removing everything except wallet.dat in your profile folder and re-opening wallet.

DNS node seeders are on correct fork (you may get a list of nodes by running 'nslookup dnsseed.execoin.net' from your command prompt).

Here is list of correct nodes just in case:
addnode=95.85.26.197
addnode=107.170.240.30
addnode=162.243.136.142
addnode=128.199.233.179
addnode=198.211.100.64
addnode=192.241.152.198
addnode=107.170.79.10
addnode=37.139.3.206
addnode=188.226.169.188
addnode=107.170.227.175
addnode=128.199.221.109
addnode=107.170.227.176
addnode=188.226.169.189
addnode=192.241.128.215
addnode=107.170.79.12
addnode=107.170.12.174
addnode=188.226.130.205

[fredeq]

Hardfork is coming at block 307770 (approximately at July 30)


This is a mandatory update, please update your wallets (source on github and windows base core clients have been updated, mac and SPV clients will be updated later)


Changes:

1. KGW has been replaced by DGW v3. Solves Time Warp Vulnerability in KGW. In addition, DGW is much more responsive (mitigates multipool issues better) and up to 50 times faster (this is important for non-C++ SPV clients in Java and Python language)

2. New reward system: Base reward reduced to 20 coins per block and now reward depends on the total network hashrate (using formula 20 - 5 * sqrt (hashrate in Gh), but not less than 5 coins per block. This reward, depending on hashrate, then reduced gradually by 2.5% every week from July 30. Thus, after 4 weeks of hardfork, with network hashrate of 4 Gh, reward will be (20-5*sqrt(4)) * 0.975 * 0.975 * 0.975 * 0.975 = 9.03 EXE. Reward, depending on hashrate, also mitigates multipool issues to some extent, and hashrate values used in formula are being calculated on the base of last 60 blocks for more responsiveness (in contrast to standard in-coin calculation using last 120 blocks)


Please add current block_reward to explorer API.

[executter]

network hashrate is very low, between 33-38 mh/s.
admins, please verify your pool !

I'm on coinpool, is working fine (@10 mh).

[execoin]

Warning!

Many nodes are still on a wrong fork! Please update and sync in accordance with http://explorer.execoin.net!

[CryptoLTD]

Warning!

Many nodes are still on a wrong fork! Please update and sync in accordance with http://explorer.execoin.net!

Have you contacted the exchanges? Cryptsy & Poloniex still have inaccessible wallets.

[vindyne8]

Just double checking, is an exact list of nodes on the correct fork available? I used the one from above for the giveaway wallet and it does not synch.

[CryptoLTD]

I am just using the new EXE wallet, w/e nodes were coded in, are working fine for me ( 16 connections )

Edit: However I dont think any of the exchanges are fully swapped over to the new fork yet. I keep checking poloniex & cryptsy and both have frozen wallets at the moment.

[flound1129]

Multipool updated last night, resynced and was synced to the same block as the explorer.  Now we're 400 blocks behind and the client will not sync past that.

Please advise.

[execoin]

Just double checking, is an exact list of nodes on the correct fork available? I used the one from above for the giveaway wallet and it does not synch.

Seeders and nodes are ok, you may just resync

Please check http://explorer.execoin.net for current block.

If your wallet stuck (or shows last block different from the block explorer), please resync by closing wallet, removing everything except wallet.dat in your profile folder and re-opening wallet.

DNS node seeders are on correct fork (you may get a list of nodes by running 'nslookup dnsseed.execoin.net' from your command prompt).

Here is list of correct nodes just in case:
addnode=95.85.26.197
addnode=107.170.240.30
addnode=162.243.136.142
addnode=128.199.233.179
addnode=198.211.100.64
addnode=192.241.152.198
addnode=107.170.79.10
addnode=37.139.3.206
addnode=188.226.169.188
addnode=107.170.227.175
addnode=128.199.221.109
addnode=107.170.227.176
addnode=188.226.169.189
addnode=192.241.128.215
addnode=107.170.79.12
addnode=107.170.12.174
addnode=188.226.130.205

[execoin]

Multipool updated last night, resynced and was synced to the same block as the explorer.  Now we're 400 blocks behind and the client will not sync past that.

Please advise.

The solution is to delete blocks (everything in the folder except wallet.dat and execoin.conf) and resync (using list of nodes - for example or if without it will get a list from seeders).
Please update ASAP

[execoin]

Warning!

Many nodes are still on a wrong fork! Please update and sync in accordance with http://explorer.execoin.net!

Have you contacted the exchanges? Cryptsy & Poloniex still have inaccessible wallets.

We should get rid of nodes on wrong fork first.
CORRECT now is Difficulty   0.61357189
Current Block   309647

!!!!!! Wrong !!!!!!!!
Current Block   309594 !!!!!!!! Wrong !!!!!!!!!
Current Difficulty   0.18550547

there is still hashrate on the wrong fork, if you know there is it, please contact and ask to update.

[flound1129]

Multipool updated last night, resynced and was synced to the same block as the explorer.  Now we're 400 blocks behind and the client will not sync past that.

Please advise.

The solution is to delete blocks (everything in the folder except wallet.dat and execoin.conf) and resync (using list of nodes - for example or if without it will get a list from seeders).
Please update ASAP

Your DNS seed is obviously still advertising nodes on the wrong fork.

You need to add a checkpoint to the code so that nodes will only connect to the proper fork.

[CryptoLTD]

http://pool.execoin.net/  Seems to be on the correct fork, if you need to know where to hash if your pool isnt workin right .

[CryptoLTD]

It looks like dedicated pool & suchpool have dropped this coin, they should be removed from pools list here & on web site.