WildRig Multi 0.49.4 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[andrucrypt]

Did anyone with 3060TI mine successfully using newer version than 0.46.6?

There is one screenshot with 3060Ti using 0.46.9 no problem(core clock 1410, mem locked at 810). Also there was some tests done by hashrate.no without any issue with newer versions. 3060Ti is just a regular Ampere gpu, so I have no idea what can be wrong there. Did you try to run only 1 gpu? Use parameter -d 0

[GW_ICO]

Thanks a lot, I tried with 3 cards and it is working like a charm

If I enable 4+ cards it start the error cycle again.
I am still looking for a way to run all 8 cards on the rig.
The rig is having  dual core G5420 CPU @3.80GHz AES with 16GB ram from which I have 13.8 GB free.

On another 2 identical rigs equipped with dual core  i3-2310M CPU @2.1 Ghz with 8gb ram - 6.3 free I am running 8xA2000 6GB cards without any issues.

[andrucrypt]

Thanks a lot, I tried with 3 cards and it is working like a charm

If I enable 4+ cards it start the error cycle again.
I am still looking for a way to run all 8 cards on the rig.
The rig is having  dual core G5420 CPU @3.80GHz AES with 16GB ram from which I have 13.8 GB free.

On another 2 identical rigs equipped with dual core  i3-2310M CPU @2.1 Ghz with 8gb ram - 6.3 free I am running 8xA2000 6GB cards without any issues.

what if try different order of cards, like start from 4th one? E.g. -d 3,4,5

[GW_ICO]

Thanks a lot!
It turned out that the card on -d 3 was causing the whole rig to fail start mining. When I get physical access I will check what is wrong with that specific card!
Right now I can run with seven cards without an issue.

[andrucrypt]

updated info in OP post

WildRig Multi 0.49.4
- improved pearlhash performance for NVIDIA RTX 3000, 4000 and 5000 series, default kernel now is 2(slightly tuned previous kernel can be used via --pearlhash-kernel 1)
- enabled default sm80 kernel for CMP170HX, so unlocked gpu's should hash at full speed now

[maXonja]

Why cant this miner be used on unmineable?
I'm getting connection error