TT-Miner 2024.1.2 BLAKE3, KAWPOW, ETHASH, ETCHASH, EPIC, SHA512256D, SHA3D, ETI

[Pokebowl]

Hello,

   Am trying to use the latest version of the miner 5.0.3 and it is consitently giving out this error:

153203 00:25:38 ****************** Start mining
153203 00:25:38 Pool[D0]: Connected to: us-east.kawpow-hub.miningpoolhub.com:20611 - IP4/6: 45.79.192.137
153203 00:25:38 Pool[D0]: difficulty changed from 0.000 H to 431.18 MH
153203 00:25:38 Pool[D0]: Received new job#: 87d0
153203 00:25:38 Pool[D0]: Working on Block#: 1277841
153203 00:25:40 Miner:    GPU[02]:  Use default intensity 21
153203 00:25:40 Miner:    GPU[02]:  Kernel 1: uses Grid: 6554 / Block: 320 -> Threads: 2097280
153203 00:25:40 Pool[D0]: difficulty changed from 431.18 MH to 312.48 MH
153203 00:25:40 Miner:    Error ******** GPU[02]:  CudaError: 719 at position 402
153203 00:25:41 Miner:    Error ******** GPU[03]:  CudaCompileError: 11 at position 54
153203 00:25:42 Miner:    Error ******** GPU[00]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** GPU[01]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now


    This is happening on 3 different machines. Two running Windows 10, one running HiveOS. The cards are a mix of 1060, 1070 and 1080Ti - latest nvidia drivers installed and also Microsoft Visual C++ redistributable 2019.

    It was suggested at some point in the thread to try using -compute 61 but that did not work for me.

    Any help would be much appreciated!

[1715576200]

1715576200

[1715576200]

1715576200

[alarmod]

Hi,

can you share your commandline please?

Code:

@echo off

:loop

TT-Miner.exe -coin rvn -luck -P RQBXs5kS4LUR8Avy47HWt3MvG6Sr6pd5Vm.%COMPUTERNAME%@rvn.woolypooly.com:55555

goto loop

or

Code:

@echo off

:loop

TT-Miner.exe -A ETHASH -P 0x71a512963677f01cf44e564f43117fc02dfcd5d0.%COMPUTERNAME%@eu1.ethermine.org:4444 -d 0 1 2 3

echo restart miner...
goto loop

Don't work with any bat-file... All ok with 3.2 version.

[TrailingStop]

my problem with nicehash 3.0.2 when i install it manually

procedure entry point cannot be found ,killtimer@CEventhandler@@QAAX-K@Z in dynamic link library C: \ Users \ xxxx\ AppData \ Local \ Programs \ NiceHash Miner \ miner_plugins \ 074d4a80-94ec-11ea-a64d-17be303ea466 \ bins \ 11.0 \ Sockets



version 4.0.3 ok

Hi,

looks like you just 'overwrite' an existing installation. Please install v5 into a clean, empty folder and try again.

[TrailingStop]

Hello,

   Am trying to use the latest version of the miner 5.0.3 and it is consitently giving out this error:

153203 00:25:38 ****************** Start mining
153203 00:25:38 Pool[D0]: Connected to: us-east.kawpow-hub.miningpoolhub.com:20611 - IP4/6: 45.79.192.137
153203 00:25:38 Pool[D0]: difficulty changed from 0.000 H to 431.18 MH
153203 00:25:38 Pool[D0]: Received new job#: 87d0
153203 00:25:38 Pool[D0]: Working on Block#: 1277841
153203 00:25:40 Miner:    GPU[02]:  Use default intensity 21
153203 00:25:40 Miner:    GPU[02]:  Kernel 1: uses Grid: 6554 / Block: 320 -> Threads: 2097280
153203 00:25:40 Pool[D0]: difficulty changed from 431.18 MH to 312.48 MH
153203 00:25:40 Miner:    Error ******** GPU[02]:  CudaError: 719 at position 402
153203 00:25:41 Miner:    Error ******** GPU[03]:  CudaCompileError: 11 at position 54
153203 00:25:42 Miner:    Error ******** GPU[00]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** GPU[01]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now


    This is happening on 3 different machines. Two running Windows 10, one running HiveOS. The cards are a mix of 1060, 1070 and 1080Ti - latest nvidia drivers installed and also Microsoft Visual C++ redistributable 2019.

    It was suggested at some point in the thread to try using -compute 61 but that did not work for me.

    Any help would be much appreciated!

Hi,

please try a lower intensity (-i 20) and check if you have enough virtual memory (on windows)

[TrailingStop]

Hi,

can you share your commandline please?

Code:

@echo off

:loop

TT-Miner.exe -coin rvn -luck -P RQBXs5kS4LUR8Avy47HWt3MvG6Sr6pd5Vm.%COMPUTERNAME%@rvn.woolypooly.com:55555

goto loop

or

Code:

@echo off

:loop

TT-Miner.exe -A ETHASH -P 0x71a512963677f01cf44e564f43117fc02dfcd5d0.%COMPUTERNAME%@eu1.ethermine.org:4444 -d 0 1 2 3

echo restart miner...
goto loop

Hi,

the '%' char is treated as a special format character. Please remove the '%' from your command line - then it should work.

Don't work with any bat-file... All ok with 3.2 version.

[devivier]

thanks it works

[devivier]

I just tested it works well but it has a load on the processor of 15%

driver 446.14
2xrtx 2060
1x gtx 1060

kawpow

[NSTempter]

Can I dig solo ETC on a local network? Is Gethwork supported?

[TrailingStop]

Can I dig solo ETC on a local network? Is Gethwork supported?

Hi, getwork is supported for kawpow, epic and the new veil progpow only - sorry.

[TrailingStop]

I just tested it works well but it has a load on the processor of 15%

driver 446.14
2xrtx 2060
1x gtx 1060

kawpow

That sounds not correct. Can you give me details of your cpu/memory please?

[alarmod]

Hi,

the '%' char is treated as a special format character. Please remove the '%' from your command line - then it should work.

No, %COMPUTERNAME% is standart variable for Windows. If я write FARM

Code:

TT-Miner.exe -A ETHASH -P 0x71a512963677f01cf44e564f43117fc02dfcd5d0.FARM@eu1.ethermine.org:4444

it is don't work too

[TrailingStop]

Hi,

the '%' char is treated as a special format character. Please remove the '%' from your command line - then it should work.

No, %COMPUTERNAME% is standart variable for Windows. If я write FARM

Code:

TT-Miner.exe -A ETHASH -P 0x71a512963677f01cf44e564f43117fc02dfcd5d0.FARM@eu1.ethermine.org:4444

it is don't work too

Strange that you do not get any other error printed. Can you please check your eventlog and check if there is a TT-Miner related error?

[devivier]

I just tested it works well but it has a load on the processor of 15%

driver 446.14
2xrtx 2060
1x gtx 1060

kawpow

That sounds not correct. Can you give me details of your cpu/memory please?

i79700k memory 16go 3600

[devivier]

ok good no probleme

[Pokebowl]

Hello,

   Am trying to use the latest version of the miner 5.0.3 and it is consitently giving out this error:

153203 00:25:38 ****************** Start mining
153203 00:25:38 Pool[D0]: Connected to: us-east.kawpow-hub.miningpoolhub.com:20611 - IP4/6: 45.79.192.137
153203 00:25:38 Pool[D0]: difficulty changed from 0.000 H to 431.18 MH
153203 00:25:38 Pool[D0]: Received new job#: 87d0
153203 00:25:38 Pool[D0]: Working on Block#: 1277841
153203 00:25:40 Miner:    GPU[02]:  Use default intensity 21
153203 00:25:40 Miner:    GPU[02]:  Kernel 1: uses Grid: 6554 / Block: 320 -> Threads: 2097280
153203 00:25:40 Pool[D0]: difficulty changed from 431.18 MH to 312.48 MH
153203 00:25:40 Miner:    Error ******** GPU[02]:  CudaError: 719 at position 402
153203 00:25:41 Miner:    Error ******** GPU[03]:  CudaCompileError: 11 at position 54
153203 00:25:42 Miner:    Error ******** GPU[00]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** GPU[01]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now


    This is happening on 3 different machines. Two running Windows 10, one running HiveOS. The cards are a mix of 1060, 1070 and 1080Ti - latest nvidia drivers installed and also Microsoft Visual C++ redistributable 2019.

    It was suggested at some point in the thread to try using -compute 61 but that did not work for me.

    Any help would be much appreciated!

Hi,

please try a lower intensity (-i 20) and check if you have enough virtual memory (on windows)

 So on one machine it made no difference, both trying various densities and increasing the pagefile to 16GB.  This is a normal desktop with 32GB RAM and 1 1080Ti

 The other machine has 2 1070 and 2 1060. The change of intensity didn't do anything, however when I increased the page file to 16GB, it started to mine maybe 40-50 seconds and then stopped. I got it to mine another time by changing the intensity, but now no matter what I try it doesn't mine at all. Same error messages. I know it makes no sense lol.

  Would you have any other suggestions?

 

[devivier]

Hello
I am very happy with version 5.03
I just have a question the time is not just 2 hours less
how to set the right time please i'm on the nicehash miner thank you

dear me it's 10 h am and on the minor 8 h am

[TrailingStop]

Hello,

   Am trying to use the latest version of the miner 5.0.3 and it is consitently giving out this error:

153203 00:25:38 ****************** Start mining
153203 00:25:38 Pool[D0]: Connected to: us-east.kawpow-hub.miningpoolhub.com:20611 - IP4/6: 45.79.192.137
153203 00:25:38 Pool[D0]: difficulty changed from 0.000 H to 431.18 MH
153203 00:25:38 Pool[D0]: Received new job#: 87d0
153203 00:25:38 Pool[D0]: Working on Block#: 1277841
153203 00:25:40 Miner:    GPU[02]:  Use default intensity 21
153203 00:25:40 Miner:    GPU[02]:  Kernel 1: uses Grid: 6554 / Block: 320 -> Threads: 2097280
153203 00:25:40 Pool[D0]: difficulty changed from 431.18 MH to 312.48 MH
153203 00:25:40 Miner:    Error ******** GPU[02]:  CudaError: 719 at position 402
153203 00:25:41 Miner:    Error ******** GPU[03]:  CudaCompileError: 11 at position 54
153203 00:25:42 Miner:    Error ******** GPU[00]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** GPU[01]:  CudaCompileError: 11 at position 54
153203 00:25:43 Miner:    Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now


    This is happening on 3 different machines. Two running Windows 10, one running HiveOS. The cards are a mix of 1060, 1070 and 1080Ti - latest nvidia drivers installed and also Microsoft Visual C++ redistributable 2019.

    It was suggested at some point in the thread to try using -compute 61 but that did not work for me.

    Any help would be much appreciated!

Hi,

please try a lower intensity (-i 20) and check if you have enough virtual memory (on windows)

 So on one machine it made no difference, both trying various densities and increasing the pagefile to 16GB.  This is a normal desktop with 32GB RAM and 1 1080Ti

 The other machine has 2 1070 and 2 1060. The change of intensity didn't do anything, however when I increased the page file to 16GB, it started to mine maybe 40-50 seconds and then stopped. I got it to mine another time by changing the intensity, but now no matter what I try it doesn't mine at all. Same error messages. I know it makes no sense lol.

  Would you have any other suggestions?

 

Maybe you can try to mine with a single GPU first. Use -d 0 to activate the first gpu only. Also please make sure that you start with no OC - just stock settings!

[TrailingStop]

Hello
I am very happy with version 5.03
I just have a question the time is not just 2 hours less
how to set the right time please i'm on the nicehash miner thank you

dear me it's 10 h am and on the minor 8 h am

Time is UTC - That makes things easier to compare. I can add a switch to use local for the next release if you need it?

[devivier]

thank you, the main thing is that the miner works 

[alarmod]

Strange that you do not get any other error printed. Can you please check your eventlog and check if there is a TT-Miner related error?

Yes!

Code:

Имя cбoйнoгo пpилoжeния: TT-Miner.exe, вepcия: 5.0.3.65, мeткa вpeмeни: 0x5ee4dbff
Имя cбoйнoгo мoдyля: ucrtbase.dll, вepcия: 10.0.19041.1, мeткa вpeмeни: 0xbd1e2564
Кoд иcключeния: 0xc0000409
Cмeщeниe oшибки: 0x00000000000711e8
Идeнтификaтop cбoйнoгo пpoцecca: 0xf24
Bpeмя зaпycкa cбoйнoгo пpилoжeния: 0x01d646db471d94da
Пyть cбoйнoгo пpилoжeния: C:\Users\Bитaлий\Desktop\Mining\TT-Miner\TT-Miner.exe
Пyть cбoйнoгo мoдyля: C:\WINDOWS\System32\ucrtbase.dll
Идeнтификaтop oтчeтa: 5dc6da01-6161-4ce9-ad61-9dd2057087e0
Пoлнoe имя cбoйнoгo пaкeтa: 
Кoд пpилoжeния, cвязaннoгo co cбoйным пaкeтoм: