TT-Miner 2024.1.2 BLAKE3, KAWPOW, ETHASH, ETCHASH, EPIC, SHA512256D, SHA3D, ETI

[TrailingStop]

New release 2.1.9 is available:

   - new algo Myriad-Groestl (Myriad, DigiByte, Verge, etc)
   - fixes a 'duplicate share' bug on very fast systems
   - add new command line options (-PRT & -PRS) to control performance information output on the screen
   - add core & mem clock information to the performance report

Sample for the new options:
-PRT INT      Performance-Report & information after INT multiple of 15 seconds
         Set INT to 0 to disable output after a fixed timeframe
         sample -RPT 24 shows the performance report after 24 * 5 sec = 2 minutes
         Default: -PRT 3

-PRS INT      Performance-Report & information after a INT shares found
         Set INT to 0 to disable output after a fixed number of shares
         sample -RPS 10 shows the performance report after 10 shares were found
         Default: -PRS 0

         Mixed sample:
            - You want to see the performance report all 25 shares and all 30 secs:
               -PRS 25 -PRT 6

            - You do not want to see any performance report:
               -PRT 0

Download-link:
https://TradeProject.de/download/Miner/TT-Miner.zip

Let me know if you run into any issues.
Happy mining!

Hi TT, Lyra2v3 don´t work. Maybe some libraries missing?

Yes, the algo library is missing cause it isn't ready yet. It is coming next in a few days. I forgot to remove it from the readme. Hope you can enjoy one of the other algos until it is finished?

Happy mining!

[TrailingStop]

Some people asking for perforemance figures so I share the settings and performance of my (development) system. In the past I run the GPU @ 55% with 0c and 0m, but for this test I found out that the GPU improves the hashrate a lot if I add some MHz on clock. But please keep in mind that for you the most important number is not what the miner shows to you, but what you finally get @ the pool in shares, hashrate and monies!

I run it now with these settings for MTP:
GIGABYTE GeForce GTX 1070 Aorus 8GB with 55% Powerlimit, Core @ 150, Mem @ 0, driver 717.11

Here is the screenshot of TT and AB after more than 30 minutes mining XZC on MintPond:

[gusknure]

Hi TrailingStop,
Last version looks pretty  stable.
Can you add more hashes?
At this moment v_2.1.9 gives about 3.6 per card, 1080Ti

[TrailingStop]

Hi TrailingStop,
Last version looks pretty  stable.
Can you add more hashes?
At this moment v_2.1.9 gives about 3.6 per card, 1080Ti

Hi - I sent you a PM with a link to the latest beta

[TrailingStop]

Version 2.1.10 is available.

-  Focus on this release was to improve hashrates for all algos. On can report some improvements on my 1070 dev interface. Please check if you get some more hashes with this version as well.

- Fixes a bug in the calculation for rejected shares.


As always tt-miner is not suspected to contain any virus - so no exception required in windows defender: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detection

Download link:
https://TradeProject.de/download/Miner/TT-Miner.zip

Let me know if you have any issues or questions,
Happy mining.

[darkfanat]

1:31:01 #######: switch to DEV mining for 179 seconds.....
1:34:01 #######: switch back to regular mining.....

but not 179 seconds    cheaters
14.02.2019 1:26:32 Added           TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080     
14.02.2019 1:34:01 Removed         TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080     

[TrailingStop]

1:31:01 #######: switch to DEV mining for 179 seconds.....
1:34:01 #######: switch back to regular mining.....

but not 179 seconds    cheaters
14.02.2019 1:26:32 Added           TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080     
14.02.2019 1:34:01 Removed         TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080     

What is your problem? Ah got it: 5 hours mining = 300 minutes. 1% of 300 minutes = 3 minutes = 180 seconds - not 179. Maybe a rounding issue? I didn't spent too much tim into this and used my time to improve the miner, add new algos and fixed bugs. Maybe I can send you a fix later - didn't thought that this is an issue.

[darkfanat]

14.02.2019 1:26:32 Added           TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080      Start dev fee
14.02.2019 1:34:01 Removed         TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080    End dev fee
total  7 min  29 sec 

[TrailingStop]

14.02.2019 1:26:32 Added           TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080      Start dev fee
14.02.2019 1:34:01 Removed         TT-Miner.exe         TCP 192.168.0.111:55167    54.36.109.3:8080    End dev fee
total  7 min  29 sec  

Is it possible that you run tt bevor the last dev session for less than 5 hours? It will save that time into the next dev session. It will next mine more than 1% for me please check a day!

[darkfanat]

Oк

[TrailingStop]

Oк

you can also see the log using tt with '-logpool'. That contains the communication with the pool including timings.

[TrailingStop]

Hi darkfanat,

I checked the sources to find out what might happened. So here is how tt does the dev-mining in detail:

1. send a ping to all pools that are OK for the selected algo (to find out which one is close and offer good latency) (3min before dev-mining)
2. open the connection to the pool
3. if that fails for any reason take the next best pool and go back to step 2
3. do dev mining


I recommend that you do your analysis using Wireshark (https://www.wireshark.org/). That way you can see if there is mining on the dev channel or if the socket is just ready to use. If you want to can do a full alnalyse of the data going through this socket and get a full picture of what is really going on.

Let me know if you have more questions.

[darkfanat]

ok  no problem.

[Juniormkl]

 TT-Miner 2.1.10 added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[UselessGuru]

Version 2.1.10 is available.

-  Focus on this release was to improve hashrates for all algos. On can report some improvements on my 1070 dev interface. Please check if you get some more hashes with this version as well.

- Fixes a bug in the calculation for rejected shares.


As always tt-miner is not suspected to contain any virus - so no exception required in windows defender: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detection

Download link:
https://TradeProject.de/download/Miner/TT-Miner.zip

Let me know if you have any issues or questions,
Happy mining.

Where can I get a version that supports

         LYRA2V3-100, LYRA2V3   Lyra2Rev3 (Vertcoin)
         LYRA2V3-92

??

My computer says:

Code:

TT-Miner.exe --api-bind 127.0.0.1:4002 -A LYRA2V3-100 -P *******************************.multipoolminer:x@lyra2rev3.eu.nicehash.com:3373 -RH -d 0
TT-Miner - Version: 2.1.10 (Feb 13 2019 23:11:20)
Press 'q' to stop mining and terminate

Active algo: Unknown
Found one CUDA device
* #0 PCI 0:1 Gigabyte   GeForce GTX 1080 Ti (6.1)       CoreClk 139 MHz | MemClk 405 MHz | 11264 MB | SM: 28

ID:0 - Primary pool:    lyra2rev3.eu.nicehash.com:3373
                        Wallet: 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo
                        Worker: multipoolminer
No backup pool defined

Hashrate reporting to the pool enabled
Nonce generation: mode 3, timeout: 0.00 secs.

API-Interface enabled. Listening on 127.0.0.1:4002

07:25:00 Cannot load the algo dll (18)

[yurasic park]

Make it possible for downloading to be able to select the version of the miner. Version 2.1.10 works much worse than 2.1.9.

[andrucrypt]

As always tt-miner is not suspected to contain any virus - so no exception required in windows defender: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detection

Just living this link here ) I was curious how you get that clean tests, but looks like virustotal doesn't work with archives So this is still not an easy task to make miner "not a miner" for anti-viruses.

[TrailingStop]

As always tt-miner is not suspected to contain any virus - so no exception required in windows defender: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detection

Just living this link here ) I was curious how you get that clean tests, but looks like virustotal doesn't work with archives So this is still not an easy task to make miner "not a miner" for anti-viruses.

At least they work with other archives, you can check with any other miner. It seems to me that I do not have any code sequences in TT-Miner that is suspected to be a virus - or used by an virus? On the other side i will not discoluser these kind of information/technology because it could be used to 'hide' a virus and I do not want to support that.

[TrailingStop]

Version 2.1.10 is available.

-  Focus on this release was to improve hashrates for all algos. On can report some improvements on my 1070 dev interface. Please check if you get some more hashes with this version as well.

- Fixes a bug in the calculation for rejected shares.


As always tt-miner is not suspected to contain any virus - so no exception required in windows defender: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detection

Download link:
https://TradeProject.de/download/Miner/TT-Miner.zip

Let me know if you have any issues or questions,
Happy mining.

Where can I get a version that supports

         LYRA2V3-100, LYRA2V3   Lyra2Rev3 (Vertcoin)
         LYRA2V3-92

??

My computer says:

Code:

TT-Miner.exe --api-bind 127.0.0.1:4002 -A LYRA2V3-100 -P *******************************.multipoolminer:x@lyra2rev3.eu.nicehash.com:3373 -RH -d 0
TT-Miner - Version: 2.1.10 (Feb 13 2019 23:11:20)
Press 'q' to stop mining and terminate

Active algo: Unknown
Found one CUDA device
* #0 PCI 0:1 Gigabyte   GeForce GTX 1080 Ti (6.1)       CoreClk 139 MHz | MemClk 405 MHz | 11264 MB | SM: 28

ID:0 - Primary pool:    lyra2rev3.eu.nicehash.com:3373
                        Wallet: 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo
                        Worker: multipoolminer
No backup pool defined

Hashrate reporting to the pool enabled
Nonce generation: mode 3, timeout: 0.00 secs.

API-Interface enabled. Listening on 127.0.0.1:4002

07:25:00 Cannot load the algo dll (18)

Will come later today or tomorrow morning.
Hope this is still OK for you?

[UselessGuru]

Version 2.1.10 is available.

-  Focus on this release was to improve hashrates for all algos. On can report some improvements on my 1070 dev interface. Please check if you get some more hashes with this version as well.

- Fixes a bug in the calculation for rejected shares.


As always tt-miner is not suspected to contain any virus - so no exception required in windows defender: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detection

Download link:
https://TradeProject.de/download/Miner/TT-Miner.zip

Let me know if you have any issues or questions,
Happy mining.

Where can I get a version that supports

         LYRA2V3-100, LYRA2V3   Lyra2Rev3 (Vertcoin)
         LYRA2V3-92

??

My computer says:

Code:

TT-Miner.exe --api-bind 127.0.0.1:4002 -A LYRA2V3-100 -P *******************************.multipoolminer:x@lyra2rev3.eu.nicehash.com:3373 -RH -d 0
TT-Miner - Version: 2.1.10 (Feb 13 2019 23:11:20)
Press 'q' to stop mining and terminate

Active algo: Unknown
Found one CUDA device
* #0 PCI 0:1 Gigabyte   GeForce GTX 1080 Ti (6.1)       CoreClk 139 MHz | MemClk 405 MHz | 11264 MB | SM: 28

ID:0 - Primary pool:    lyra2rev3.eu.nicehash.com:3373
                        Wallet: 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo
                        Worker: multipoolminer
No backup pool defined

Hashrate reporting to the pool enabled
Nonce generation: mode 3, timeout: 0.00 secs.

API-Interface enabled. Listening on 127.0.0.1:4002

07:25:00 Cannot load the algo dll (18)

Will come later today or tomorrow morning.
Hope this is still OK for you?

Fine with me :-) Thank you for your great work.