ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 07:45:17 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 07:56:40 AM |
|
well i had some stability problems, at first I thought it was virtual memory related, but it was actually oc settings, i'm trying to stabilize miner with 32gb pagefile and lower core oc, memory -502 lowers hashrate to 11,6mh.sec, while +500 has almost zero effect, so it's better to keep at 0, with c29 oc settings i have 12,6mh/sec, i will try to maximize stability with 0 memory oc and highest stable core oc on every gpu, well without using ohgod eth enlargment pill i lost around 1mh.sec of total hashrate, actually it's almost 1.3mh.sec well with 3XGTX1080 EVGA FTW i put +50 core (using second bios) and it operates around 1750MHZ, 1XGTX 1080 MSI gamer x i put +180 core and it operates around 1650MHZ, 1XGTX1080 Ti zotac amp i put +120 MHZ and it works around 1550MHZ, all 5 gpu are on TDP 70% and memory 0 + pill, here's my first result (more or less stable): https://i.imgur.com/hwrh9hG.pngi will test it in longer period and see how it will do on nicehash pool as well, actually i find out that with pill even setting memory at -502 gives you same hashrate as with 0, without any core oc i got only 13.3mh/sec, with core oc i got around 13.6mh/sec well using this setting also increases hashrates (memory -502 + pill): https://i.imgur.com/FlQBWsA.pngi will test it for stability and report back, i think it can operate around 13.8+mh/sec without losing stability (you have to lower one of the GPU core setting (the one that uses teamviewer) otherwise miner will crash with very high core clock i managed to stabilize at around 13.7mh/sec : 3XGTX1080 EVGA FTW core +0 (using second bios which has automatic core oc) 1XGTX1080 MSI gamer x Core +160 1XGTX 1080Ti Zotac amp core +120 all 5 GPU memory -502 TDP 70% + pill + force p2 state off, after few hours of testing i will report actual nicehash pool hashrate and also check stability on those settings: https://i.imgur.com/movKvh7.pngHi- Thanks you very much for your very detailed reports and information. I'm sure that will help other to find their OC settings as well. Thanks a lot. I will try to avoid rejected shares, Thanks!
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 07:58:03 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner Hi, I just see this from time to time - try to fix that. Thanks for reporting.
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 08:23:19 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner Hi, I just see this from time to time - try to fix that. Thanks for reporting. after restart the miner its work again but after about 1 hour speed is drop half in nicehash, if u have any new beta test let me know i will try Thanks
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 08:40:00 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner Hi, I just see this from time to time - try to fix that. Thanks for reporting. after restart the miner its work again but after about 1 hour speed is drop half in nicehash, if u have any new beta test let me know i will try Thanks Hi- can you check if that is related to rejected shares? They show two speds. One for accepted shares, the other for rejected. Is the sum of them what you expected as hashrate?
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 10:20:39 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner Hi, I just see this from time to time - try to fix that. Thanks for reporting. after restart the miner its work again but after about 1 hour speed is drop half in nicehash, if u have any new beta test let me know i will try Thanks Hi- can you check if that is related to rejected shares? They show two speds. One for accepted shares, the other for rejected. Is the sum of them what you expected as hashrate? not showing any reject share... but not showing accepted share too
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
February 22, 2019, 10:35:06 AM |
|
Nicehash MTP only supported by the official MTP CCminer version.
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 10:44:54 AM |
|
Nicehash MTP only supported by the official MTP CCminer version.
nah... i have try ccminer from nicehash its a lot of bug
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 10:56:24 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner Hi, I just see this from time to time - try to fix that. Thanks for reporting. after restart the miner its work again but after about 1 hour speed is drop half in nicehash, if u have any new beta test let me know i will try Thanks Hi- can you check if that is related to rejected shares? They show two speds. One for accepted shares, the other for rejected. Is the sum of them what you expected as hashrate? not showing any reject share... but not showing accepted share too Thanks for checking. I see that you have disconnections. I'm not sure if I already ask, but can you please make sure that di do NOT have -RH in your command line. Nicehash do not like the hashrate report and diconnects as soon as they receive this notification. Thanks.
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 11:04:49 AM |
|
sometimes nicehash error reading when this happen no accepted share in miner Hi, I just see this from time to time - try to fix that. Thanks for reporting. after restart the miner its work again but after about 1 hour speed is drop half in nicehash, if u have any new beta test let me know i will try Thanks Hi- can you check if that is related to rejected shares? They show two speds. One for accepted shares, the other for rejected. Is the sum of them what you expected as hashrate? not showing any reject share... but not showing accepted share too Thanks for checking. I see that you have disconnections. I'm not sure if I already ask, but can you please make sure that di do NOT have -RH in your command line. Nicehash do not like the hashrate report and diconnects as soon as they receive this notification. Thanks. This happen on rtx 2080ti card not 1 accepted share.... in 1070ti work but the hashrate in nicehash drop after 1 hour or less... i dont using that -RH command... i run ttminer wth awesome miner Thanks
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 11:43:03 AM |
|
i think the problem is in nicehash all miner i try have reject share include mtp sgminer for AMD
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 01:00:16 PM |
|
i think the problem is in nicehash all miner i try have reject share include mtp sgminer for AMD
You maybe right.
|
|
|
|
tetomambo
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 22, 2019, 01:43:59 PM |
|
well i had some stability problems, at first I thought it was virtual memory related, but it was actually oc settings, i'm trying to stabilize miner with 32gb pagefile and lower core oc, memory -502 lowers hashrate to 11,6mh.sec, while +500 has almost zero effect, so it's better to keep at 0, with c29 oc settings i have 12,6mh/sec, i will try to maximize stability with 0 memory oc and highest stable core oc on every gpu, well without using ohgod eth enlargment pill i lost around 1mh.sec of total hashrate, actually it's almost 1.3mh.sec well with 3XGTX1080 EVGA FTW i put +50 core (using second bios) and it operates around 1750MHZ, 1XGTX 1080 MSI gamer x i put +180 core and it operates around 1650MHZ, 1XGTX1080 Ti zotac amp i put +120 MHZ and it works around 1550MHZ, all 5 gpu are on TDP 70% and memory 0 + pill, here's my first result (more or less stable): https://i.imgur.com/hwrh9hG.pngi will test it in longer period and see how it will do on nicehash pool as well, actually i find out that with pill even setting memory at -502 gives you same hashrate as with 0, without any core oc i got only 13.3mh/sec, with core oc i got around 13.6mh/sec well using this setting also increases hashrates (memory -502 + pill): https://i.imgur.com/FlQBWsA.pngi will test it for stability and report back, i think it can operate around 13.8+mh/sec without losing stability (you have to lower one of the GPU core setting (the one that uses teamviewer) otherwise miner will crash with very high core clock i managed to stabilize at around 13.7mh/sec : 3XGTX1080 EVGA FTW core +0 (using second bios which has automatic core oc) 1XGTX1080 MSI gamer x Core +160 1XGTX 1080Ti Zotac amp core +120 all 5 GPU memory -502 TDP 70% + pill + force p2 state off, after few hours of testing i will report actual nicehash pool hashrate and also check stability on those settings: https://i.imgur.com/movKvh7.png i need code for start in nice hach
|
|
|
|
|
Vivik
|
|
February 22, 2019, 03:23:31 PM |
|
|
|
|
|
george2019
Jr. Member
Offline
Activity: 83
Merit: 3
|
|
February 22, 2019, 05:37:25 PM |
|
@echo off
:loop
TT-Miner.exe -A MTP-100 -P walletaddress:x@mtp.eu.nicehash.com:3374
echo restart miner... goto loop
that bat file is for nvidia 1000-2000 series GPU
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 05:57:10 PM |
|
@echo off
:loop
TT-Miner.exe -A MTP-100 -P walletaddress:x@mtp.eu.nicehash.com:3374
echo restart miner... goto loop
that bat file is for nvidia 1000-2000 series GPU
Yes. MTP-100 means that the algo will be compiled using cuda version 10.0. So that should work for 10 and 20 series.
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
February 22, 2019, 08:50:37 PM |
|
check after 1 hour in nicehash... your speed become half and wait 1 more hour u will see no hashrate in your worker at nicehash
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 22, 2019, 08:55:06 PM |
|
check after 1 hour in nicehash... your speed become half and wait 1 more hour u will see no hashrate in your worker at nicehash Yes - I found the bug and will fix that. It is related to the diconnections.
|
|
|
|
angelbbs
|
|
February 22, 2019, 09:09:40 PM |
|
check after 1 hour in nicehash... your speed become half and wait 1 more hour u will see no hashrate in your worker at nicehash Yes - I found the bug and will fix that. It is related to the diconnections. What about this problems: 1. On Windows 7 API doesn't working. tt-miner.exe --api-bind 127.0.0.1:4002 -a MTP -P wallet.worker:x@mtp.eu.nicehash.com:3374 TT-Miner - Version: 2.1.11-beta (Feb 21 2019 07:32:25) Please check your parameter for the API binding (api-bind 127.0.0.1) 2. On LYRA2V3 tt-miner closes unexpectedly after start. CrashDump.dmp created.
|
|
|
|
|