TT-Miner 2024.1.2 BLAKE3, KAWPOW, ETHASH, ETCHASH, EPIC, SHA512256D, SHA3D, ETI

[tbearhere]

How can I display the individual hashrate of each card?

[TrailingStop]

How can I display the individual hashrate of each card?

Hi,

not sure what you mean exactly? If you run TT you should see after some seconds something like this>

06:34:45 GPU[0]: 13.195 MH/s  CClk:1.354 GHz MClk:1.307 GHz 62C 76% 125W 105.56 kH/W [A540:R0 0.0%]  LastShare: 00:00:04
06:34:45 GPU[1]: 12.656 MH/s  CClk:1.759 GHz MClk:3.898 GHz 69C 55% 152W 83.263 kH/W [A482:R0 0.0%]  LastShare: 00:00:04
06:34:45 Rig-Speed[2 min]: 25.851 MH/s 277W 93.323 kH/W [A1022:R0 0.0%] Uptime: 05:04:36  LastShare: 00:00:04
06:34:45 Luck: avg.time per share (424.19 MH @ 25.851 MH/s) 17 secs. passed 4 secs. luck share: 27% session: 99%

The first number after GPU[0] and GPU[1] is the hashrate for that card. Please clarify is this is not what you are locking for.

Thanks.

[danspasiva]

How can I display the individual hashrate of each card?

Hi,

not sure what you mean exactly? If you run TT you should see after some seconds something like this>

06:34:45 GPU[0]: 13.195 MH/s  CClk:1.354 GHz MClk:1.307 GHz 62C 76% 125W 105.56 kH/W [A540:R0 0.0%]  LastShare: 00:00:04
06:34:45 GPU[1]: 12.656 MH/s  CClk:1.759 GHz MClk:3.898 GHz 69C 55% 152W 83.263 kH/W [A482:R0 0.0%]  LastShare: 00:00:04
06:34:45 Rig-Speed[2 min]: 25.851 MH/s 277W 93.323 kH/W [A1022:R0 0.0%] Uptime: 05:04:36  LastShare: 00:00:04
06:34:45 Luck: avg.time per share (424.19 MH @ 25.851 MH/s) 17 secs. passed 4 secs. luck share: 27% session: 99%

The first number after GPU[0] and GPU[1] is the hashrate for that card. Please clarify is this is not what you are locking for.

Thanks.

Hello, for some reason this miner will not start as it says "connected to pool xxxxxxxxxxxx" and then it says "lost connection to pool xxxxxxxxxxx" over and over and never starts, the same pool works well with a different software

[TrailingStop]

How can I display the individual hashrate of each card?

Hi,

not sure what you mean exactly? If you run TT you should see after some seconds something like this>

06:34:45 GPU[0]: 13.195 MH/s  CClk:1.354 GHz MClk:1.307 GHz 62C 76% 125W 105.56 kH/W [A540:R0 0.0%]  LastShare: 00:00:04
06:34:45 GPU[1]: 12.656 MH/s  CClk:1.759 GHz MClk:3.898 GHz 69C 55% 152W 83.263 kH/W [A482:R0 0.0%]  LastShare: 00:00:04
06:34:45 Rig-Speed[2 min]: 25.851 MH/s 277W 93.323 kH/W [A1022:R0 0.0%] Uptime: 05:04:36  LastShare: 00:00:04
06:34:45 Luck: avg.time per share (424.19 MH @ 25.851 MH/s) 17 secs. passed 4 secs. luck share: 27% session: 99%

The first number after GPU[0] and GPU[1] is the hashrate for that card. Please clarify is this is not what you are locking for.

Thanks.

can you please show me your command line? Let me check if there is an issue - could also be a problem in the miner if the pools uses some command the miner do not know.



Hello, for some reason this miner will not start as it says "connected to pool xxxxxxxxxxxx" and then it says "lost connection to pool xxxxxxxxxxx" over and over and never starts, the same pool works well with a different software

[TrailingStop]

My cclk is default setting about 800. I want add cclk more around 1500. I do how?

Try MSI Afterburner and increase core clock.

[TrailingStop]

My cclk is default setting about 800. I want add cclk more around 1500. I do how?

Try MSI Afterburner and increase core clock.

I'm setting MSI afterburner +160 cc.

if you want to have 1500 you need to set cc to +700 - not sure if you will get a stable system with these settings. TT-Miner doesn't do any OC - so I cannot help much, sorry.

[TrailingStop]

Refresh of the version 2.2.3.

Added the cuda 10.0 and cuda 9.2 version of ProgPoWZ for Zano and a small fix for fairpool.

Let me know if you have any issues.

Happy mining.

[tbearhere]

How can I display the individual hashrate of each card?

Hi,

not sure what you mean exactly? If you run TT you should see after some seconds something like this>

06:34:45 GPU[0]: 13.195 MH/s  CClk:1.354 GHz MClk:1.307 GHz 62C 76% 125W 105.56 kH/W [A540:R0 0.0%]  LastShare: 00:00:04
06:34:45 GPU[1]: 12.656 MH/s  CClk:1.759 GHz MClk:3.898 GHz 69C 55% 152W 83.263 kH/W [A482:R0 0.0%]  LastShare: 00:00:04
06:34:45 Rig-Speed[2 min]: 25.851 MH/s 277W 93.323 kH/W [A1022:R0 0.0%] Uptime: 05:04:36  LastShare: 00:00:04
06:34:45 Luck: avg.time per share (424.19 MH @ 25.851 MH/s) 17 secs. passed 4 secs. luck share: 27% session: 99%

The first number after GPU[0] and GPU[1] is the hashrate for that card. Please clarify is this is not what you are locking for.

Thanks.

I'm sorry..I should have said the name of each card.. like GPU[0]gtx 1080..or GPU[1]gtx 2080..ect.

Like this picture.

[TrailingStop]

How can I display the individual hashrate of each card?

Hi,

not sure what you mean exactly? If you run TT you should see after some seconds something like this>

06:34:45 GPU[0]: 13.195 MH/s  CClk:1.354 GHz MClk:1.307 GHz 62C 76% 125W 105.56 kH/W [A540:R0 0.0%]  LastShare: 00:00:04
06:34:45 GPU[1]: 12.656 MH/s  CClk:1.759 GHz MClk:3.898 GHz 69C 55% 152W 83.263 kH/W [A482:R0 0.0%]  LastShare: 00:00:04
06:34:45 Rig-Speed[2 min]: 25.851 MH/s 277W 93.323 kH/W [A1022:R0 0.0%] Uptime: 05:04:36  LastShare: 00:00:04
06:34:45 Luck: avg.time per share (424.19 MH @ 25.851 MH/s) 17 secs. passed 4 secs. luck share: 27% session: 99%

The first number after GPU[0] and GPU[1] is the hashrate for that card. Please clarify is this is not what you are locking for.

Thanks.

I'm sorry..I should have said the name of each card.. like GPU[0]gtx 1080..or GPU[1]gtx 2080..ect.

Like this picture.

Hi,

ah - got it. I will make that as an option since many ppl have the same GPU in a rig and this information is just a wast of space in that case.

[tbearhere]

How can I display the individual hashrate of each card?

Hi,

not sure what you mean exactly? If you run TT you should see after some seconds something like this>

06:34:45 GPU[0]: 13.195 MH/s  CClk:1.354 GHz MClk:1.307 GHz 62C 76% 125W 105.56 kH/W [A540:R0 0.0%]  LastShare: 00:00:04
06:34:45 GPU[1]: 12.656 MH/s  CClk:1.759 GHz MClk:3.898 GHz 69C 55% 152W 83.263 kH/W [A482:R0 0.0%]  LastShare: 00:00:04
06:34:45 Rig-Speed[2 min]: 25.851 MH/s 277W 93.323 kH/W [A1022:R0 0.0%] Uptime: 05:04:36  LastShare: 00:00:04
06:34:45 Luck: avg.time per share (424.19 MH @ 25.851 MH/s) 17 secs. passed 4 secs. luck share: 27% session: 99%

The first number after GPU[0] and GPU[1] is the hashrate for that card. Please clarify is this is not what you are locking for.

Thanks.

I'm sorry..I should have said the name of each card.. like GPU[0]gtx 1080..or GPU[1]gtx 2080..ect.

Like this picture.

Hi,

ah - got it. I will make that as an option since many ppl have the same GPU in a rig and this information is just a wast of space in that case.

Thank you.  Yes to make that an option would be great.  

[Shaddyr]

v.2.2.3
single 1070Ti didn't like the version - screen attached. With the same settings v2.2.2 works fine. But 3x1066 agreied to work with no errors.

[TrailingStop]

v.2.2.3
single 1070Ti didn't like the version - screen attached. With the same settings v2.2.2 works fine. But 3x1066 agreied to work with no errors.

Hi,

I change the mining code to get some more hashes. It could be that OC settings that works with older version doesn't work now. I see that you have some accepted and some rejected shares. You have no rejected shares with 1660?

[c0mrade69]

New version 2.2.3 release.

These are the modification - I have had to modify some of the core functions so that they become OS independent. So please check if this version works as expected. If not please reinstall 2.2.2 and report the issues to me so that I can fix them.

- Fixed a file sharing bug.
- Changed Thread-functions to be OS independent.
- Changed File I/O to be OS independent.
- Fixed a the time-interval for updatechecks.
- Shows information how long the Merkle Tree generation took (MTP only).
- Shows the current mining block if the information was available in mining notify.
- Shows optimized grid- and blocksize that is used for the Kernel.
- Add power usage information into API information. Requires Awesome Miner Version 6.3.4 or later.
- ProgPoW: Show when a new algo is created (New Epoch for BCI, otherwise after 50 block).
- ProgPoW: Calculate optimized blocksize for each new algo.
- ProgPoW: Add version used by Zano (Cuda 10.1 only - older cuda versions will follow soon).
- ProgPoW/MTP: Small performance improvements.

Happy mining!

thanks for new version.

Just want to report that this

Code:

- Add power usage information into API information. Requires Awesome Miner Version 6.3.4 or later.

is still not working for me on Awesome Miner 6.3.4 mining MTP (picture below , power usage should be showing under clocking).
Also would be nice that it could pass clocking info to Awesome Miner.

https://i.imgur.com/uFGKU7Q.jpg

[joseph32]

Just click the "Map to system monitoring" and mark "Display system monitoring data in the GPU tab". Problem solved 

[Shivoreun]

New version 2.2.3 release.

These are the modification - I have had to modify some of the core functions so that they become OS independent. So please check if this version works as expected. If not please reinstall 2.2.2 and report the issues to me so that I can fix them.

- Fixed a file sharing bug.
- Changed Thread-functions to be OS independent.
- Changed File I/O to be OS independent.
- Fixed a the time-interval for updatechecks.
- Shows information how long the Merkle Tree generation took (MTP only).
- Shows the current mining block if the information was available in mining notify.
- Shows optimized grid- and blocksize that is used for the Kernel.
- Add power usage information into API information. Requires Awesome Miner Version 6.3.4 or later.
- ProgPoW: Show when a new algo is created (New Epoch for BCI, otherwise after 50 block).
- ProgPoW: Calculate optimized blocksize for each new algo.
- ProgPoW: Add version used by Zano (Cuda 10.1 only - older cuda versions will follow soon).
- ProgPoW/MTP: Small performance improvements.

Happy mining!

And still no fix for API, not accessible anywhere, except localhost

[c0mrade69]

Just click the "Map to system monitoring" and mark "Display system monitoring data in the GPU tab". Problem solved 

Thaaaanx bro you saved my day!

[gusknure]

How I can mine on nicehash? I get an error that miner lost connection.

[TrailingStop]

How I can mine on nicehash? I get an error that miner lost connection.

MTP? Ethash?

[gusknure]

MTP

[TrailingStop]

MTP

Make sure you do not have -RH or -rate on the command line