Alekscz
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2019, 02:11:55 PM |
|
if, is balls == shares? Do you have by any chance logfiles that you can share with me? They may contain more information what happened. It is OK to DM them to me. Thanks. Unfortunately, the folder logs is empty
|
|
|
|
TrailingStop (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 566
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2019, 02:14:04 PM |
|
if, is balls == shares? Do you have by any chance logfiles that you can share with me? They may contain more information what happened. It is OK to DM them to me. Thanks. Unfortunately, the folder logs is empty Yes- default is without logs. You need to add -log -logpool to create the logs.
|
|
|
|
|
ninjam
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2019, 08:17:59 AM |
|
I'm also having this problem, miner stops sending shares, it receives jobs but doesn't send any share, also power usage drops so gpus are idle. Miner appears to do work, but it is not doing any work.
|
|
|
|
TrailingStop (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 566
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2019, 08:21:31 AM |
|
I'm also having this problem, miner stops sending shares, it receives jobs but doesn't send any share, also power usage drops so gpus are idle. Miner appears to do work, but it is not doing any work.
Hi, working on a fix. I you like I would DM you a link to a beta to check if my fix works later today? Thanks
|
|
|
|
ninjam
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2019, 08:43:03 AM |
|
Yes you can pm me, I will test it. Tnx.
|
|
|
|
Romario26
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2019, 06:24:47 PM |
|
Hi I use TT-Miner 2.2.5 thank you for the fine program! several rig at the same time work for me approximately once a day some of rig ceases to connect to the server and ceases to mine it is enough to restart NiceHashMinerLegasy, and then mining of zany begins to work. if just to restart TT-Miner, a problem and remains https://drive.google.com/open?id=1mu4H9SYFbgDd_VnpqVEU4QqQc9fCw9-5
|
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 28, 2019, 07:26:33 PM |
|
not interested in testing ccminer ? currently faster than those (or very close to t-rex)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
gusknure
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 30, 2019, 11:42:56 AM |
|
Hi TrailingStop, I can't increase insensitive more then 14 Rig with 6*1080ti, Virtual memory tried with 64Gb up to 160Gb - no luck installed memory 4G, tried to put 8Gb, but same result How to increase an insensitive, any ideas?
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 30, 2019, 12:07:55 PM |
|
not interested in testing ccminer ? currently faster than those (or very close to t-rex) Which one DJM? ... Has been a long time since I have seen you here on BCT. Rune hasn't come back with a mouthful of crap to spark anyone up as far as I can see, so I guess that must be it ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) TTMiner is superb at the moment, though waiting on the Linux version to become ready for use for us to trial it. What link is the one you are talking about? Your one? Do you have the link available? #crysx
|
|
|
|
Romario26
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 01, 2019, 01:39:22 PM |
|
Hi I use TT-Miner 2.2.5 thank you for the fine program! several rig at the same time work for me approximately once a day some of rig ceases to connect to the server and ceases to mine it is enough to restart NiceHashMinerLegasy, and then mining of zany begins to work. if just to restart TT-Miner, a problem and remains https://drive.google.com/open?id=1mu4H9SYFbgDd_VnpqVEU4QqQc9fCw9-5
|
|
|
|
blagoev88
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 01, 2019, 04:42:24 PM |
|
me too
|
|
|
|
Sbenben92
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 02, 2019, 06:37:23 AM |
|
Hello,
Can you make progpow compatible with 'super sero' plz?
Thanks
|
|
|
|
goldren
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 03, 2019, 04:47:25 PM |
|
did you make a clean install? and removed the old version first? of course. to a new directory. win10 64 (sorry, but 1 PM per 24 hour)
|
|
|
|
TBOEMC
Jr. Member
Offline
Activity: 41
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 04, 2019, 08:05:16 AM |
|
Hi I use TT-Miner 2.2.5 thank you for the fine program! several rig at the same time work for me approximately once a day some of rig ceases to connect to the server and ceases to mine it is enough to restart NiceHashMinerLegasy, and then mining of zany begins to work. if just to restart TT-Miner, a problem and remains https://drive.google.com/open?id=1mu4H9SYFbgDd_VnpqVEU4QqQc9fCw9-5This is long time ago many times reported, but still no answer and no repair of this bug ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I am not able to use this excavator with my rigs (1070, 1070Ti, 2070) - doesnt matter what card.
|
|
|
|
TrailingStop (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 566
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 04, 2019, 08:11:12 AM |
|
Hi I use TT-Miner 2.2.5 thank you for the fine program! several rig at the same time work for me approximately once a day some of rig ceases to connect to the server and ceases to mine it is enough to restart NiceHashMinerLegasy, and then mining of zany begins to work. if just to restart TT-Miner, a problem and remains https://drive.google.com/open?id=1mu4H9SYFbgDd_VnpqVEU4QqQc9fCw9-5This is long time ago many times reported, but still no answer and no repair of this bug ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I am not able to use this excavator with my rigs (1070, 1070Ti, 2070) - doesnt matter what card. Hi, I'm rewriting most of the miner at the moment to get it ready for linux as well. so with this rewrite a new communication layer will come, I will address this issue as well for this version.
|
|
|
|
jwesolow
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 04, 2019, 03:01:56 PM |
|
It has been over a month since you promised a quick fix for the connection issue and you've been largely absent from this board during that time. When the miner can't connect I lose hours of mining. This must be fixed immediately or I will use a different miner...we shouldn't have to wait for the miner to be rewritten. Using a slightly slower miner is going to make more money in the long term because it will actually work. The issue seems to be in protocol detection. Here are logs from this morning using v2.2.5. When it is broken, it detects "EthProxy-Stratum" instead of "Stratum" (the last four lines repeated for an hour and a half before I noticed it): 8:16:42 AM POOL: Connecting to mtp.usa.nicehash.com:3374 - PoolID: 0 8:16:42 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol Stratum 8:16:43 AM Miner: GPU[0] use default intensity 14, Gridsize: 2560 8:16:43 AM Miner: GPU[0] uses Gridsize: 2560 and Blocksize: 256 8:16:46 AM POOL: Unknown protocol - cannot continue 8:16:46 AM POOL: Subscribed to mtp.usa.nicehash.com:3374 - detected protocol: EthProxy-Stratum 8:16:46 AM POOL: Worker authorized: worker1 8:16:46 AM GPU[0]: 0.000 H/s CClk:1.695 GHz MClk:218.03 MHz 66C 59% 49W 0.000 H/W [A0:R0 0.0%] LastShare: - 8:16:46 AM Rig-Speed[2 min]: 0.000 H/s 49W 0.000 H/W [A0:R0 0.0%] Uptime: 00:00:04 LastShare: - 8:17:00 AM GPU[0]: 0.000 H/s CClk:1.695 GHz MClk:218.03 MHz 62C 58% 49W 0.000 H/W [A0:R0 0.0%] LastShare: - 8:17:00 AM Rig-Speed[2 min]: 0.000 H/s 49W 0.000 H/W [A0:R0 0.0%] Uptime: 00:00:17 LastShare: - 8:17:15 AM GPU[0]: 0.000 H/s CClk:1.695 GHz MClk:218.03 MHz 59C 55% 47W 0.000 H/W [A0:R0 0.0%] LastShare: - 8:17:15 AM Rig-Speed[2 min]: 0.000 H/s 47W 0.000 H/W [A0:R0 0.0%] Uptime: 00:00:32 LastShare: - 8:17:16 AM POOL: Lost connection to mtp.usa.nicehash.com:3374 8:17:16 AM POOL: Mining temporary stopped 8:17:19 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol EthProxy-Stratum 8:17:19 AM POOL: Mining resumed 8:17:19 AM POOL: Lost connection to mtp.usa.nicehash.com:3374 8:17:19 AM POOL: Mining temporary stopped 8:17:22 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol EthProxy-Stratum 8:17:22 AM POOL: Mining resumed 8:17:22 AM POOL: Lost connection to mtp.usa.nicehash.com:3374 8:17:22 AM POOL: Mining temporary stopped 8:17:25 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol EthProxy-Stratum 8:17:25 AM POOL: Mining resumed
When it works correctly: 9:48:33 AM POOL: Connecting to mtp.usa.nicehash.com:3374 - PoolID: 0 9:48:33 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol Stratum 9:48:33 AM POOL: Subscribed to mtp.usa.nicehash.com:3374 - detected protocol: Stratum 9:48:33 AM POOL: Worker authorized: worker1 9:48:33 AM POOL: Received new job#: 233c184868a 9:48:34 AM Miner: GPU[0] use default intensity 14, Gridsize: 2560 9:48:34 AM Miner: GPU[0] uses Gridsize: 2560 and Blocksize: 256 9:48:34 AM POOL: difficulty up from 0.000 H to 268.44 MH 9:48:36 AM GPU[0]: *Merkle tree created in 0.5 seconds
|
|
|
|
TrailingStop (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 566
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 04, 2019, 03:17:53 PM |
|
It has been over a month since you promised a quick fix for the connection issue and you've been largely absent from this board during that time. When the miner can't connect I lose hours of mining. This must be fixed immediately or I will use a different miner...we shouldn't have to wait for the miner to be rewritten. Using a slightly slower miner is going to make more money in the long term because it will actually work. The issue seems to be in protocol detection. Here are logs from this morning using v2.2.5. When it is broken, it detects "EthProxy-Stratum" instead of "Stratum" (the last four lines repeated for an hour and a half before I noticed it): 8:16:42 AM POOL: Connecting to mtp.usa.nicehash.com:3374 - PoolID: 0 8:16:42 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol Stratum 8:16:43 AM Miner: GPU[0] use default intensity 14, Gridsize: 2560 8:16:43 AM Miner: GPU[0] uses Gridsize: 2560 and Blocksize: 256 8:16:46 AM POOL: Unknown protocol - cannot continue 8:16:46 AM POOL: Subscribed to mtp.usa.nicehash.com:3374 - detected protocol: EthProxy-Stratum 8:16:46 AM POOL: Worker authorized: worker1 8:16:46 AM GPU[0]: 0.000 H/s CClk:1.695 GHz MClk:218.03 MHz 66C 59% 49W 0.000 H/W [A0:R0 0.0%] LastShare: - 8:16:46 AM Rig-Speed[2 min]: 0.000 H/s 49W 0.000 H/W [A0:R0 0.0%] Uptime: 00:00:04 LastShare: - 8:17:00 AM GPU[0]: 0.000 H/s CClk:1.695 GHz MClk:218.03 MHz 62C 58% 49W 0.000 H/W [A0:R0 0.0%] LastShare: - 8:17:00 AM Rig-Speed[2 min]: 0.000 H/s 49W 0.000 H/W [A0:R0 0.0%] Uptime: 00:00:17 LastShare: - 8:17:15 AM GPU[0]: 0.000 H/s CClk:1.695 GHz MClk:218.03 MHz 59C 55% 47W 0.000 H/W [A0:R0 0.0%] LastShare: - 8:17:15 AM Rig-Speed[2 min]: 0.000 H/s 47W 0.000 H/W [A0:R0 0.0%] Uptime: 00:00:32 LastShare: - 8:17:16 AM POOL: Lost connection to mtp.usa.nicehash.com:3374 8:17:16 AM POOL: Mining temporary stopped 8:17:19 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol EthProxy-Stratum 8:17:19 AM POOL: Mining resumed 8:17:19 AM POOL: Lost connection to mtp.usa.nicehash.com:3374 8:17:19 AM POOL: Mining temporary stopped 8:17:22 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol EthProxy-Stratum 8:17:22 AM POOL: Mining resumed 8:17:22 AM POOL: Lost connection to mtp.usa.nicehash.com:3374 8:17:22 AM POOL: Mining temporary stopped 8:17:25 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol EthProxy-Stratum 8:17:25 AM POOL: Mining resumed
When it works correctly: 9:48:33 AM POOL: Connecting to mtp.usa.nicehash.com:3374 - PoolID: 0 9:48:33 AM POOL: Connected to: mtp.usa.nicehash.com:3374 - IP4: 172.65.221.202:3374, Protocol Stratum 9:48:33 AM POOL: Subscribed to mtp.usa.nicehash.com:3374 - detected protocol: Stratum 9:48:33 AM POOL: Worker authorized: worker1 9:48:33 AM POOL: Received new job#: 233c184868a 9:48:34 AM Miner: GPU[0] use default intensity 14, Gridsize: 2560 9:48:34 AM Miner: GPU[0] uses Gridsize: 2560 and Blocksize: 256 9:48:34 AM POOL: difficulty up from 0.000 H to 268.44 MH 9:48:36 AM GPU[0]: *Merkle tree created in 0.5 seconds
Hi, please try this to avoid protocol detection: TT-Miner.exe -A MTP -log -luck -logpool -P stratum+tcp://<NICEHASH_ADDRESS>.<WORKER_NAME>:x@mtp.eu.nicehash.com:3374 Sorry for the delay.
|
|
|
|
ouray
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 08, 2019, 02:19:52 PM |
|
TT-Miner 2.2.5 vs Phoenix Miner 4.2c
1. Hash rate (winner=TT-Miner 2.2.5)
2. Accepted shares (winner=Phoenix Miner 4.2c) 3. Rejected shares (winner=Phoenix Miner 4.2c=NONE) 4. Dev fee (winner=Phoenix Miner 4.2c=0.65%)
|
|
|
|
|